微信扫码登录
作者其它图纸
查看更多
猜你喜欢
活动福利+发布图纸
登录注册
自动卷钢板机（ID:519353）
| # | 文件名称 | 文件大小 |
|---|---|---|
| 1 | +必看说明+.txt | 2.22 KB |
| 2 | 25MM_PIVOT_SUPPORT_DEFAULT_AS_M_ASM.sldasm | 48 KB |
| 3 | ASSEM2_ANY_ASM.sldasm | 66 KB |
| 4 | BASE_PLATE_DEFAULT_AS_MACHINED__ASM.sldasm | 89.5 KB |
| 5 | BOTTOM_PIPE_DEFAULT_AS_MACHINED_ASM.sldasm | 64.5 KB |
| 6 | BUSH-BOTTOM_ANY.sldprt | 50 KB |
| 7 | BUSH-TOP_ANY.sldprt | 50 KB |
| 8 | COLUMN_DEFAULT_AS_MACHINED__ANY_ASM.sldasm | 129 KB |
| 9 | CY-BODY_ANY.sldprt | 62.5 KB |
| 10 | CY-SHAFT_ANY.sldprt | 54.5 KB |
| 11 | CYLINDER_BODY_ANY-48061.sldprt | 50 KB |
| 12 | CYLINDER_BODY_ANY-70606_ASM.sldasm | 45.5 KB |
| 13 | CYLINDER_COVER_ANY.sldprt | 52 KB |
| 14 | CYLINDER_SHAFT_ANY.sldprt | 85 KB |
| 15 | EXTRUDE1-120942.sldprt | 50 KB |
| 16 | EXTRUDE1-24947.sldprt | 50 KB |
| 17 | EXTRUDE1-2610.sldprt | 50.5 KB |
| 18 | EXTRUDE1-37984.sldprt | 54.5 KB |
| 19 | EXTRUDE2.sldprt | 55 KB |
| 20 | FILLET1.sldprt | 52 KB |
| 21 | FILLET2.sldprt | 52 KB |
| 22 | FILLET_BEAD1-109702.sldprt | 50.5 KB |
| 23 | FILLET_BEAD1-31777.sldprt | 50.5 KB |
| 24 | FILLET_BEAD1-74194.sldprt | 50.5 KB |
| 25 | FILLET_BEAD1-77166.sldprt | 49.5 KB |
| 26 | FILLET_BEAD2-101737.sldprt | 50.5 KB |
| 27 | FILLET_BEAD2-40272.sldprt | 50.5 KB |
| 28 | FILLET_BEAD2-42743.sldprt | 50.5 KB |
| 29 | FILLET_BEAD24.sldprt | 50.5 KB |
| 30 | FILLET_BEAD25.sldprt | 49.5 KB |
| 31 | FILLET_BEAD26.sldprt | 49.5 KB |
| 32 | FILLET_BEAD27.sldprt | 50 KB |
| 33 | FILLET_BEAD28.sldprt | 50.5 KB |
| 34 | FILLET_BEAD29.sldprt | 50.5 KB |
| 35 | FILLET_BEAD3-103830.sldprt | 50.5 KB |
| 36 | FILLET_BEAD3-107283.sldprt | 50.5 KB |
| 37 | FILLET_BEAD3-25635.sldprt | 50.5 KB |
| 38 | FILLET_BEAD30.sldprt | 50.5 KB |
| 39 | FILLET_BEAD31.sldprt | 50.5 KB |
| 40 | FILLET_BEAD33.sldprt | 50.5 KB |
| 41 | FILLET_BEAD35.sldprt | 50.5 KB |
| 42 | FILLET_BEAD36.sldprt | 50.5 KB |
| 43 | FILLET_BEAD37.sldprt | 50.5 KB |
| 44 | FILLET_BEAD38.sldprt | 49.5 KB |
| 45 | FILLET_BEAD39.sldprt | 49.5 KB |
| 46 | FILLET_BEAD4-105439.sldprt | 50.5 KB |
| 47 | FILLET_BEAD4-23410.sldprt | 50.5 KB |
| 48 | FILLET_BEAD4-74883.sldprt | 50.5 KB |
| 49 | FILLET_BEAD40.sldprt | 50.5 KB |
| 50 | FILLET_BEAD41.sldprt | 50.5 KB |
| 51 | FILLET_BEAD42.sldprt | 50.5 KB |
| 52 | FILLET_BEAD43.sldprt | 50.5 KB |
| 53 | FILLET_BEAD44.sldprt | 50.5 KB |
| 54 | FILLET_BEAD45.sldprt | 50.5 KB |
| 55 | FILLET_BEAD46.sldprt | 50.5 KB |
| 56 | FILLET_BEAD47.sldprt | 50.5 KB |
| 57 | FILLET_BEAD5-44790.sldprt | 50.5 KB |
| 58 | FILLET_BEAD5-48787.sldprt | 50.5 KB |
| 59 | FILLET_BEAD6-10270.sldprt | 50.5 KB |
| 60 | FILLET_BEAD6-20246.sldprt | 50.5 KB |
| 61 | FILLET_BEAD7-85553.sldprt | 50.5 KB |
| 62 | FILLET_BEAD7-94160.sldprt | 50.5 KB |
| 63 | FILLET_BEAD8.sldprt | 50.5 KB |
| 64 | GEAR_BOX_ANY_ASM.sldasm | 45 KB |
| 65 | HEX_STRUCTURAL_BOLT_GRAD-105208.sldprt | 60 KB |
| 66 | HEX_STRUCTURAL_BOLT_GRADE-69031.sldprt | 60 KB |
| 67 | HEX_STRUCTURAL_BOLT_GRADE-87067.sldprt | 60 KB |
| 68 | IDEL-25_ANY.sldprt | 258 KB |
| 69 | IDLE_SHAFT_ANY.sldprt | 50 KB |
| 70 | KEY20MM_ANY.sldprt | 52 KB |
| 71 | LINK_PLATE_BRUSS_BUSH_ANY.sldprt | 50 KB |
| 72 | LOCK_ANY.sldprt | 51 KB |
| 73 | M42X3_0_TAPPED_HOLE1.sldprt | 54.5 KB |
| 74 | MAIN_DN_ANY.sldprt | 536 KB |
| 75 | MIRROR1_10_.sldprt | 50.5 KB |
| 76 | MIRROR1_11_.sldprt | 50.5 KB |
| 77 | MIRROR1_12_.sldprt | 50.5 KB |
| 78 | MIRROR1_13_.sldprt | 50.5 KB |
| 79 | MIRROR1_14_.sldprt | 50.5 KB |
| 80 | MIRROR1_15_.sldprt | 50.5 KB |
| 81 | MIRROR1_16_.sldprt | 50.5 KB |
| 82 | MIRROR1_17_.sldprt | 50.5 KB |
| 83 | MIRROR1_18_.sldprt | 50.5 KB |
| 84 | MIRROR1_19_.sldprt | 50.5 KB |
| 85 | MIRROR1_1_-38416.sldprt | 52 KB |
| 86 | MIRROR1_1_-40264.sldprt | 51 KB |
| 87 | MIRROR1_20_.sldprt | 50.5 KB |
| 88 | MIRROR1_21_.sldprt | 50.5 KB |
| 89 | MIRROR1_22_.sldprt | 50.5 KB |
| 90 | MIRROR1_23_.sldprt | 50.5 KB |
| 91 | MIRROR1_24_.sldprt | 50.5 KB |
| 92 | MIRROR1_25_.sldprt | 50.5 KB |
| 93 | MIRROR1_26_.sldprt | 50.5 KB |
| 94 | MIRROR1_27_.sldprt | 50.5 KB |
| 95 | MIRROR1_28_.sldprt | 50.5 KB |
| 96 | MIRROR1_29_.sldprt | 50.5 KB |
| 97 | MIRROR1_2_-11589.sldprt | 56 KB |
| 98 | MIRROR1_2_-38549.sldprt | 51 KB |
| 99 | MIRROR1_30_.sldprt | 50.5 KB |
| 100 | MIRROR1_31_.sldprt | 50.5 KB |
| 101 | MIRROR1_32_.sldprt | 50.5 KB |
| 102 | MIRROR1_33_.sldprt | 50.5 KB |
| 103 | MIRROR1_34_.sldprt | 50.5 KB |
| 104 | MIRROR1_35_.sldprt | 50.5 KB |
| 105 | MIRROR1_36_.sldprt | 50.5 KB |
| 106 | MIRROR1_37_.sldprt | 50.5 KB |
| 107 | MIRROR1_38_.sldprt | 50.5 KB |
| 108 | MIRROR1_39_.sldprt | 50.5 KB |
| 109 | MIRROR1_3_.sldprt | 52 KB |
| 110 | MIRROR1_40_.sldprt | 50.5 KB |
| 111 | MIRROR1_41_.sldprt | 50.5 KB |
| 112 | MIRROR1_42_.sldprt | 50.5 KB |
| 113 | MIRROR1_43_.sldprt | 50.5 KB |
| 114 | MIRROR1_44_.sldprt | 50.5 KB |
| 115 | MIRROR1_45_.sldprt | 50.5 KB |
| 116 | MIRROR1_46_.sldprt | 50.5 KB |
| 117 | MIRROR1_47_.sldprt | 50.5 KB |
| 118 | MIRROR1_48_.sldprt | 50.5 KB |
| 119 | MIRROR1_49_.sldprt | 50.5 KB |
| 120 | MIRROR1_4_.sldprt | 50 KB |
| 121 | MIRROR1_50_.sldprt | 50.5 KB |
| 122 | MIRROR1_51_.sldprt | 50.5 KB |
| 123 | MIRROR1_52_.sldprt | 50.5 KB |
| 124 | MIRROR1_53_.sldprt | 50.5 KB |
| 125 | MIRROR1_54_.sldprt | 50.5 KB |
| 126 | MIRROR1_55_.sldprt | 50.5 KB |
| 127 | MIRROR1_56_.sldprt | 50.5 KB |
| 128 | MIRROR1_57_.sldprt | 50.5 KB |
| 129 | MIRROR1_58_.sldprt | 50.5 KB |
| 130 | MIRROR1_59_.sldprt | 50.5 KB |
| 131 | MIRROR1_5_.sldprt | 49.5 KB |
| 132 | MIRROR1_60_.sldprt | 50.5 KB |
| 133 | MIRROR1_61_.sldprt | 50.5 KB |
| 134 | MIRROR1_6_.sldprt | 49.5 KB |
| 135 | MIRROR1_7_.sldprt | 55.5 KB |
| 136 | MIRROR1_8_.sldprt | 50.5 KB |
| 137 | MIRROR1_9_.sldprt | 50.5 KB |
| 138 | MOTOR_ANY.sldprt | 628 KB |
| 139 | PIN2_ANY.sldprt | 49.5 KB |
| 140 | PIN_ANY.sldprt | 49 KB |
| 141 | PIVOT_PIN_ANY.sldprt | 49.5 KB |
| 142 | ROLLER_GEAR_35_ANY.sldprt | 350 KB |
| 143 | ROLLER_MACH_ANY_ASM.sldasm | 139 KB |
| 144 | ROLLER_MACH_ASM.sldasm | 1.53 MB |
| 145 | SCALE2_1_.sldprt | 52 KB |
| 146 | SCALE2_2_.sldprt | 260 KB |
| 147 | STAND_DEFAULT_AS_MACHINED__ANY_ASM.sldasm | 56.5 KB |
| 148 | TEST_SUPPORT_TOP_ANY_ASM.sldasm | 79 KB |
| 149 | TOP_BODY_DEFAULT_AS_MACHINED__A_ASM.sldasm | 264 KB |
| 150 | TOP_COLUMN_ANY_ASM.sldasm | 87 KB |
| 151 | TOP_ROLLER_ANY_ASM.sldasm | 49.5 KB |
| 152 | _4000H_-_EXTRUDE1_-107965.sldprt | 55.5 KB |
| 153 | _4000H_-_EXTRUDE1_-20958.sldprt | 55.5 KB |
| 154 | _880H_-_EXTRUDE1_-11008.sldprt | 55.5 KB |
| 155 | _880H_-_EXTRUDE1_-120366.sldprt | 55.5 KB |
| 156 | _880H_-_EXTRUDE1_-124316.sldprt | 55.5 KB |
| 157 | _880H_-_EXTRUDE1_-55554.sldprt | 55.5 KB |
| 158 | _880H_-_EXTRUDE1_-64834.sldprt | 55.5 KB |
| 159 | _BUSH_HOUSING_-_CHAMFER1_-4639.sldprt | 50 KB |
| 160 | _BUSH_HOUSING_-_CHAMFER1_-78010.sldprt | 50 KB |
| 161 | _COLUMN_PIVOT_PLATE_-_EXT-31016.sldprt | 51 KB |
| 162 | _COLUMN_PIVOT_PLATE_-_EXT-51022.sldprt | 51 KB |
| 163 | _COLUMN_PIVOT_PLATE_-_EXT-53433.sldprt | 51 KB |
| 164 | _COLUMN_PIVOT_PLATE_-_EXT-94174.sldprt | 51 KB |
| 165 | _COLUMN_PLATE_-_EXTRUDE1_-27189.sldprt | 58.5 KB |
| 166 | _COLUMN_PLATE_-_EXTRUDE1_-53980.sldprt | 58 KB |
| 167 | _CYL-BOTTOM_PLATE_-_EXTRU-87876.sldprt | 54.5 KB |
| 168 | _CYL-BOTTOM_PLATE_-_EXTRUD-9432.sldprt | 54.5 KB |
| 169 | _MOTOR_BASE_-_M20_TAPPED_HOLE1_.sldprt | 57.5 KB |
| 170 | _PART3_-_EXTRUDE1_.sldprt | 51 KB |
| 171 | _PART3_-_FILLET_BEAD10_.sldprt | 50.5 KB |
| 172 | _PART3_-_FILLET_BEAD11_.sldprt | 50.5 KB |
| 173 | _PART3_-_FILLET_BEAD12_.sldprt | 50.5 KB |
| 174 | _PART3_-_FILLET_BEAD14_.sldprt | 50.5 KB |
| 175 | _PART3_-_FILLET_BEAD15_.sldprt | 50.5 KB |
| 176 | _PART3_-_FILLET_BEAD16_.sldprt | 50.5 KB |
| 177 | _PART3_-_FILLET_BEAD18_.sldprt | 50.5 KB |
| 178 | _PART3_-_FILLET_BEAD19_.sldprt | 50.5 KB |
| 179 | _PART3_-_FILLET_BEAD20_.sldprt | 50.5 KB |
| 180 | _PART3_-_FILLET_BEAD21_.sldprt | 50.5 KB |
| 181 | _PART3_-_FILLET_BEAD22_.sldprt | 50.5 KB |
| 182 | _PART3_-_FILLET_BEAD3_.sldprt | 50.5 KB |
| 183 | _PART3_-_FILLET_BEAD4_.sldprt | 50.5 KB |
| 184 | _PART3_-_FILLET_BEAD6_.sldprt | 50.5 KB |
| 185 | _PART3_-_FILLET_BEAD7_.sldprt | 50.5 KB |
| 186 | _PART3_-_FILLET_BEAD8_.sldprt | 50.5 KB |
| 187 | _PART3_-_MIRROR2_1__.sldprt | 51 KB |
| 188 | _PART3_-_MIRROR2_2__.sldprt | 51 KB |
| 189 | _PART3_-_MIRROR2_3__.sldprt | 51 KB |
| 190 | _PART3_-__PART1_-_EXTRUD-104270.sldprt | 51 KB |
| 191 | _PART3_-__PART1_-_EXTRUDE-34870.sldprt | 51 KB |
| 192 | _PART3_-__PART1_-_EXTRUDE-37993.sldprt | 51 KB |
| 193 | _PART3_-__PART2_-_M20X2_0-80338.sldprt | 52 KB |
| 194 | _PART3_-__PART2_-_M20X2_0-84825.sldprt | 52 KB |
| 195 | _PART3_-__PART4_-_EXTRUDE-43273.sldprt | 51 KB |
| 196 | _PART3_-__PART4_-_EXTRUDE-65535.sldprt | 51 KB |
| 197 | _PIVOT_BUSH_-_CHAMFER1_-121064.sldprt | 51 KB |
| 198 | _PIVOT_BUSH_-_CHAMFER1_-44939.sldprt | 51 KB |
| 199 | _PIVOT_SUPPORT_BUSH_-_CUT-EXTRU.sldprt | 50.5 KB |
| 200 | _PLATE2_-_EXTRUDE1_-11706.sldprt | 51 KB |
| 201 | _PLATE2_-_EXTRUDE1_-19978.sldprt | 51 KB |
| 202 | _PLATE2_-_FILLET_BEAD1_-10280.sldprt | 50.5 KB |
| 203 | _PLATE2_-_FILLET_BEAD1_-2463.sldprt | 50.5 KB |
| 204 | _PLATE2_-_FILLET_BEAD2_-12726.sldprt | 50.5 KB |
| 205 | _PLATE2_-_FILLET_BEAD2_-49626.sldprt | 50.5 KB |
| 206 | _PLATE2_-_FILLET_BEAD3_-81893.sldprt | 50.5 KB |
| 207 | _PLATE2_-_FILLET_BEAD3_-89616.sldprt | 50.5 KB |
| 208 | _PLATE2_-_FILLET_BEAD4_-104819.sldprt | 50.5 KB |
| 209 | _PLATE2_-_FILLET_BEAD4_-88024.sldprt | 50.5 KB |
| 210 | _PLATE2_-__PULL_CLAMP_PL-122605.sldprt | 54.5 KB |
| 211 | _PLATE2_-__PULL_CLAMP_PLA-44259.sldprt | 54.5 KB |
| 212 | _PLATE2_-__PULL_CLAMP_PLA-53312.sldprt | 54.5 KB |
| 213 | _PLATE2_-__PULL_CLAMP_PLA-86427.sldprt | 54.5 KB |
| 214 | _SHAFT-FLANGE_WELDED_-_CHAMFER1.sldprt | 51 KB |
| 215 | _SHAFT-FLANGE_WELDED_-__-103381.sldprt | 51 KB |
| 216 | _SHAFT-FLANGE_WELDED_-__-105731.sldprt | 51 KB |
| 217 | _SHAFT-FLANGE_WELDED_-__-113334.sldprt | 51 KB |
| 218 | _SHAFT-FLANGE_WELDED_-__-118068.sldprt | 51 KB |
| 219 | _SHAFT-FLANGE_WELDED_-__B-25785.sldprt | 51 KB |
| 220 | _SHAFT-FLANGE_WELDED_-__B-70391.sldprt | 52.5 KB |
| 221 | _SHAFT-FLANGE_WELDED_-__B-81739.sldprt | 51 KB |
| 222 | _SHAFT-FLANGE_WELDED_-__B-92657.sldprt | 51 KB |
| 223 | _SHAFT-FLANGE_WELDED_-__B-98152.sldprt | 51 KB |
| 224 | _SUPP-PLATE_-_EXTRUDE1_-29437.sldprt | 51 KB |
| 225 | _SUPP-PLATE_-_EXTRUDE1_-40712.sldprt | 51 KB |
| 226 | _TOP_LINK_PLATE_-_EXTRUDE1_.sldprt | 52 KB |
| 227 | _TOP_LINK_PLATE_-_FILLET_BEAD10.sldprt | 50.5 KB |
| 228 | _TOP_LINK_PLATE_-_FILLET_BEAD11.sldprt | 50.5 KB |
| 229 | _TOP_LINK_PLATE_-_FILLET_BEAD12.sldprt | 50.5 KB |
| 230 | _TOP_LINK_PLATE_-_FILLET_BEAD13.sldprt | 50.5 KB |
| 231 | _TOP_LINK_PLATE_-_FILLET_BEAD14.sldprt | 50.5 KB |
| 232 | _TOP_LINK_PLATE_-_FILLET_BEAD1_.sldprt | 50 KB |
| 233 | _TOP_LINK_PLATE_-_FILLET_BEAD2_.sldprt | 50 KB |
| 234 | _TOP_LINK_PLATE_-_FILLET_BEAD3_.sldprt | 50.5 KB |
| 235 | _TOP_LINK_PLATE_-_FILLET_BEAD4_.sldprt | 50.5 KB |
| 236 | _TOP_LINK_PLATE_-_FILLET_BEAD5_.sldprt | 50.5 KB |
| 237 | _TOP_LINK_PLATE_-_FILLET_BEAD6_.sldprt | 50.5 KB |
| 238 | _TOP_LINK_PLATE_-_FILLET_BEAD7_.sldprt | 50.5 KB |
| 239 | _TOP_LINK_PLATE_-_FILLET_BEAD8_.sldprt | 50.5 KB |
| 240 | _TOP_LINK_PLATE_-_FILLET_BEAD9_.sldprt | 50.5 KB |
| 241 | _TOP_LINK_PLATE_-__CORRNE-19544.sldprt | 50.5 KB |
| 242 | _TOP_LINK_PLATE_-__CORRNE-28736.sldprt | 50.5 KB |
| 243 | _TOP_LINK_PLATE_-__CORRNE-92762.sldprt | 50.5 KB |
| 244 | _TOP_LINK_PLATE_-__CORRNER-8864.sldprt | 50.5 KB |
| 245 | _TOP_LINK_PLATE_-__LINK_PLATE_B.sldprt | 50 KB |
| 246 | _TOP_LINK_PLATE_-__LINK_PLATE_S.sldprt | 56 KB |
| 247 | _TOP_LINK_PLATE_-__TOP_LINK_PLA.sldprt | 52 KB |
| 248 | _TOP_LINK_PLATE_-__VERTI-100985.sldprt | 50.5 KB |
| 249 | _TOP_LINK_PLATE_-__VERTI-101984.sldprt | 50.5 KB |
| 250 | _TOP_LINK_PLATE_-__VERTI-110423.sldprt | 51 KB |
| 251 | _TOP_LINK_PLATE_-__VERTI-111948.sldprt | 50.5 KB |
| 252 | _TOP_LINK_PLATE_-__VERTI-112620.sldprt | 50.5 KB |
| 253 | _TOP_LINK_PLATE_-__VERTI-117195.sldprt | 51 KB |
| 254 | _TOP_LINK_PLATE_-__VERTI-121891.sldprt | 51 KB |
| 255 | _TOP_LINK_PLATE_-__VERTI-123460.sldprt | 50.5 KB |
| 256 | _TOP_LINK_PLATE_-__VERTI-124180.sldprt | 50.5 KB |
| 257 | _TOP_LINK_PLATE_-__VERTI-124185.sldprt | 50.5 KB |
| 258 | _TOP_LINK_PLATE_-__VERTIC-14140.sldprt | 55.5 KB |
| 259 | _TOP_LINK_PLATE_-__VERTIC-15484.sldprt | 51 KB |
| 260 | _TOP_LINK_PLATE_-__VERTIC-18678.sldprt | 50.5 KB |
| 261 | _TOP_LINK_PLATE_-__VERTIC-18834.sldprt | 50.5 KB |
| 262 | _TOP_LINK_PLATE_-__VERTIC-19558.sldprt | 50.5 KB |
| 263 | _TOP_LINK_PLATE_-__VERTIC-21832.sldprt | 50.5 KB |
| 264 | _TOP_LINK_PLATE_-__VERTIC-23398.sldprt | 51 KB |
| 265 | _TOP_LINK_PLATE_-__VERTIC-24796.sldprt | 50.5 KB |
| 266 | _TOP_LINK_PLATE_-__VERTIC-27889.sldprt | 50.5 KB |
| 267 | _TOP_LINK_PLATE_-__VERTIC-30135.sldprt | 50.5 KB |
| 268 | _TOP_LINK_PLATE_-__VERTIC-32617.sldprt | 50.5 KB |
| 269 | _TOP_LINK_PLATE_-__VERTIC-36419.sldprt | 51 KB |
| 270 | _TOP_LINK_PLATE_-__VERTIC-40978.sldprt | 50.5 KB |
| 271 | _TOP_LINK_PLATE_-__VERTIC-41853.sldprt | 50.5 KB |
| 272 | _TOP_LINK_PLATE_-__VERTIC-41858.sldprt | 50.5 KB |
| 273 | _TOP_LINK_PLATE_-__VERTIC-47797.sldprt | 51 KB |
| 274 | _TOP_LINK_PLATE_-__VERTIC-56440.sldprt | 50.5 KB |
| 275 | _TOP_LINK_PLATE_-__VERTIC-57151.sldprt | 50.5 KB |
| 276 | _TOP_LINK_PLATE_-__VERTIC-67251.sldprt | 50.5 KB |
| 277 | _TOP_LINK_PLATE_-__VERTIC-70945.sldprt | 50.5 KB |
| 278 | _TOP_LINK_PLATE_-__VERTIC-81026.sldprt | 50.5 KB |
| 279 | _TOP_LINK_PLATE_-__VERTIC-82439.sldprt | 50.5 KB |
| 280 | _TOP_LINK_PLATE_-__VERTIC-91057.sldprt | 50.5 KB |
| 281 | _TOP_LINK_PLATE_-__VERTIC-91770.sldprt | 50.5 KB |
| 282 | _TOP_LINK_PLATE_-__VERTIC-92628.sldprt | 50.5 KB |
| 283 | _TOP_LINK_PLATE_-__VERTIC-96416.sldprt | 50.5 KB |
| 284 | _TOP_LINK_PLATE_-__VERTIC-98014.sldprt | 51 KB |
| 285 | _TOP_LINK_PLATE_-__VERTICA-1910.sldprt | 50.5 KB |
| 286 | _TOP_LINK_PLATE_-__VERTICA-4919.sldprt | 50.5 KB |
| 287 | _TOP_SHAFT_-_EXTRUDE1_.sldprt | 49.5 KB |
| 288 | _UNDER_BASE_PLATE_-_EXTRU-39545.sldprt | 51.5 KB |
| 289 | _UNDER_BASE_PLATE_-_EXTRUD-1036.sldprt | 51.5 KB |
| 290 | roller_mach_asm.stp | 8.34 MB |
| 291 | 【 屿双网 www.ysh3d.com 】 更多【资料】【图档】.url | 177 B |
| 292 | 公众号免费下载.jpg | 79 KB |
免责申明:
本网站模型由用户自行上传，如权利人发现存在误传其作品情形，请及时与本站联系。
免费下载
此图纸可免费下载
图纸ID：519353
文件大小：8.44M
软件版本：STEP,SOLIDWORKS
图纸格式：sldasm,sldprt
参数/编辑：可修改，包括参数
上传时间：2021-05-21
图纸介绍：
发布者
屿双网小匠
作品: 13827
粉丝: 65
![TX027-CR系列加热器[TX027-CR-550W-9]](https://yushuangwang2.oss-accelerate.aliyuncs.com/fileimg/m67c840c6ba004/01_home.jpg)
提示
×
下载该图档需要消耗0金币！
确认下载
客服
签到
分享
