微信扫码登录
作者其它图纸
查看更多
猜你喜欢
活动福利+发布图纸
登录注册
户外排爆救援机器人3D数模图（ID:554359）
130
0
0
| # | 文件名称 | 文件大小 |
|---|---|---|
| 1 | +必看说明+.txt | 2.22 KB |
| 2 | .25-20 Steel Nylon Locknut.sldprt | 103 KB |
| 3 | 0.03 Thick, 0.25 ID, 0.375 OD.sldprt | 55.5 KB |
| 4 | 0.03-Thick-0.25-ID-0.375-OD.sldprt | 55.5 KB |
| 5 | 0.0625 Delrin Washer - 0.5 Hex 217-3261.sldprt | 58 KB |
| 6 | 0.125 Delrin Washer - 0.5 Hex 217-2758.sldprt | 58 KB |
| 7 | 0.25 Delrin Washer - 0.5 Hex 217-3259.sldprt | 58 KB |
| 8 | 0.5 Delrin Washer - 0.5 Hex 217-3261.sldprt | 58 KB |
| 9 | 0.5 Hex Collar.sldprt | 232 KB |
| 10 | 0.875(Machined) Delrin Washer.sldprt | 57.5 KB |
| 11 | 02-1MT-0_5-FO1_BM_heads-bif.sldprt | 61.5 KB |
| 12 | 02-2-0_5-FO1_BM_heads_left-bif.sldprt | 61 KB |
| 13 | 021_075-FO1_BM_tube.sldprt | 55.5 KB |
| 14 | 0_56250_075-rod_part0.sldprt | 55.5 KB |
| 15 | 1 Delrin Washer - 0.5 Hex 217-3263.sldprt | 57.5 KB |
| 16 | 100_DRIVETRAIN.sldasm | 81.7 KB |
| 17 | 101_000_BUMPER_LEFT.sldasm | 34 KB |
| 18 | 101_000_BUMPER_RIGHT.sldasm | 34.5 KB |
| 19 | 101_001_RIGHT_SIDE_SideRails.sldprt | 102 KB |
| 20 | 101_001_SideRails.sldprt | 102 KB |
| 21 | 101_002_BackRail.sldprt | 102 KB |
| 22 | 101_003_FrontRailExtensionToCutout.sldprt | 62 KB |
| 23 | 101_004_FrontRailExtensionToBackOfCutout.sldprt | 68.5 KB |
| 24 | 101_005_FullWidthRail.sldprt | 108 KB |
| 25 | 101_006_MountingRails.sldprt | 108 KB |
| 26 | 101_007_TGusset.sldprt | 64.5 KB |
| 27 | 101_008_LGusset.sldprt | 62 KB |
| 28 | 101_009_UGusset.sldprt | 66 KB |
| 29 | 101_010_OverlayGusset.sldprt | 107 KB |
| 30 | 101_011_BumperExtensionExtrusion.sldprt | 60.5 KB |
| 31 | 101_012_TGussetForBumperExtension.sldprt | 64.5 KB |
| 32 | 101_013_HaloMountingBlocks.sldprt | 56.5 KB |
| 33 | 101_014_FrontHaloDelrinPlates.sldprt | 59.5 KB |
| 34 | 101_015_SideHaloMountingBlocks.sldprt | 57 KB |
| 35 | 101_016_SideHaloDelrinPlates.sldprt | 59.5 KB |
| 36 | 101_017_BackHaloDelrinPlates.sldprt | 69 KB |
| 37 | 101_018_SideHaloAlumPlates.sldprt | 61.5 KB |
| 38 | 101_019_FrontHaloAlumPlates.sldprt | 60.5 KB |
| 39 | 101_020_BackHaloAlumPlates.sldprt | 81 KB |
| 40 | 101_021_AlumBellyPanLIGHTENED.sldprt | 1.32 MB |
| 41 | 101_022_BUMPER_FRONT_WOOD.sldprt | 56.5 KB |
| 42 | 101_023_BUMPER_SIDE_WOOD.sldprt | 56.5 KB |
| 43 | 101_024_BUMPER_BACK_WOOD.sldprt | 56.5 KB |
| 44 | 101_025_BUMPER_RIGHT.sldprt | 62.5 KB |
| 45 | 101_026_BUMPER_LEFT.sldprt | 62.5 KB |
| 46 | 101_027_MountingRails_Right.sldprt | 108 KB |
| 47 | 101_CHASSIS.sldasm | 51.6 KB |
| 48 | 102_000_FrontWheelModule.sldasm | 40.9 KB |
| 49 | 102_000_MiddleWheelModule.sldasm | 41.4 KB |
| 50 | 102_001_FrontAndBackOutputShaft.sldprt | 71.5 KB |
| 51 | 102_002_FrontSprocketSpacer.sldprt | 57.5 KB |
| 52 | 102_003_MiniCimGearboxPlate.sldprt | 231 KB |
| 53 | 102_004_GearboxStandoff.sldprt | 55.5 KB |
| 54 | 102_005_ClusterShaftOutputShaft.sldprt | 69 KB |
| 55 | 102_006_OutputShaft.sldprt | 72 KB |
| 56 | 102_007_OutputShaftSpacer.sldprt | 57.5 KB |
| 57 | 102_008_EncoderAluminiumPlate.sldprt | 60 KB |
| 58 | 102_009_EncoderLexanSpacer.sldprt | 61 KB |
| 59 | 102_010_Pseudo_Chain.sldprt | 58 KB |
| 60 | 102_011_DogShaft.sldprt | 81 KB |
| 61 | 102_013_DogShaft30tGear.sldprt | 150 KB |
| 62 | 102_014_PTO_Output_Shaft.sldprt | 62.5 KB |
| 63 | 102_015_PTOSupportPlate.sldprt | 58.5 KB |
| 64 | 102_016_PTOPlateStandoff.sldprt | 55.5 KB |
| 65 | 102_017_PTO_Chain_Spacer.sldprt | 57.5 KB |
| 66 | 102_019_Pneumatic_Cylinder_Standoff.sldprt | 55.5 KB |
| 67 | 102_020_OUTSIDE_BEARING_BLOCK.sldprt | 62 KB |
| 68 | 102_021_INSIDE_BEARING_BLOCK.sldprt | 61.5 KB |
| 69 | 102_Cluster_Shaft_Assembly.sldasm | 36 KB |
| 70 | 102_Dog_Shaft_Assembly.sldasm | 39.2 KB |
| 71 | 102_Dog_Shaft_Assembly_1.sldasm | 39.3 KB |
| 72 | 102_Free_Shaft_Assembly.sldasm | 34.5 KB |
| 73 | 102_Left_Gearbox_.sldasm | 65.3 KB |
| 74 | 102_Output_Shaft_Assembly.sldasm | 36 KB |
| 75 | 102_PTO_OutputShaft_Assembly.sldasm | 33.8 KB |
| 76 | 102_Right_Gearbox_.sldasm | 67.8 KB |
| 77 | 103_001_Electrical_Board.sldprt | 73.5 KB |
| 78 | 103_003_Electrical_Board_Support.sldprt | 63 KB |
| 79 | 103_004_Electrical_Board_Support_Standoff.sldprt | 56 KB |
| 80 | 103_005_TankMount.sldprt | 61.5 KB |
| 81 | 103_008_Pneumatics_Baseplate.sldprt | 57.5 KB |
| 82 | 103_009_Pneumatics_BasePlate_standoff.sldprt | 58.5 KB |
| 83 | 103_Electrical_BoardAssembly.sldasm | 39.7 KB |
| 84 | 103_Pneumatic_Tank_Assembly.sldasm | 33.4 KB |
| 85 | 103_Pneumatics_Base_Assembly.sldasm | 36.2 KB |
| 86 | 12t CIM Motor Gear with Mounting Hardware 217-2614-001.sldprt | 90.5 KB |
| 87 | 12t Sprocket #35 with Hex Bore.sldprt | 166 KB |
| 88 | 12t Sprocket Single #35 with Hex Bore.sldprt | 114 KB |
| 89 | 13_75mm_1_2_ThunderHex_ID_x_1_125_OD_x_0_313_WD_Flanged_Bearing_217-4006.sldprt | 67 KB |
| 90 | 15t_Aluminum_Hub_Sprocket_35_Chain_1_2_Hex_Bore_217-2660.sldprt | 145 KB |
| 91 | 175-DP(F,D-231-1).sldasm | 35.9 KB |
| 92 | 175-DP(F,D-231-1)_1.sldasm | 35.4 KB |
| 93 | 17P0000_rear_head.sldprt | 64.5 KB |
| 94 | 17R-6_30250C.sldprt | 58.5 KB |
| 95 | 17R000-0_rod_guide.sldprt | 64.5 KB |
| 96 | 1_2_Hex_Bore_Aluminum_VersaHub_217-2592.sldprt | 84.5 KB |
| 97 | 200_201_001_TopPlate.sldprt | 320 KB |
| 98 | 200_201_002_PlateStandoff.sldprt | 55.5 KB |
| 99 | 200_201_003_BackPlateExtrusion.sldprt | 61 KB |
| 100 | 200_201_004_BackPlate.sldprt | 60 KB |
| 101 | 200_201_005_BottomPlateExtensionStandoff.sldprt | 56 KB |
| 102 | 200_201_006_BottomPlate.125.sldprt | 60 KB |
| 103 | 200_201_007_BottomPlate.03125.sldprt | 59.5 KB |
| 104 | 200_201_008_StaticShaft.sldprt | 66.5 KB |
| 105 | 200_201_009_VersaSpacer.sldprt | 57.5 KB |
| 106 | 200_201_010_NinjaStar.sldprt | 67.5 KB |
| 107 | 200_201_011_NinjaStarStandoff.sldprt | 55.5 KB |
| 108 | 200_201_012_TopSandwichPlate.sldprt | 318 KB |
| 109 | 200_201_013_CarriageArm.sldprt | 64.5 KB |
| 110 | 200_201_014_BackExtrusion.sldprt | 108 KB |
| 111 | 200_201_015_BackExtrusionInserts.sldprt | 59 KB |
| 112 | 200_201_016_PivotPlate.sldprt | 87.5 KB |
| 113 | 200_201_017_PivotStandoff.sldprt | 55.5 KB |
| 114 | 200_201_018_OpticalSensorMount.sldprt | 59 KB |
| 115 | 200_201_019_SnailStandoff.sldprt | 55.5 KB |
| 116 | 200_201_CarriageSupportAssembly.sldasm | 39.8 KB |
| 117 | 200_201_LeftNinjaStar.sldasm | 33.9 KB |
| 118 | 200_201_LeftStaticRoller.sldasm | 42.7 KB |
| 119 | 200_201_NinjaStar.sldasm | 33.8 KB |
| 120 | 200_201_StaticAssembly.sldasm | 63 KB |
| 121 | 200_201_StaticRoller.sldasm | 43.7 KB |
| 122 | 200_201_VersaAssembly.sldasm | 39.1 KB |
| 123 | 200_202_001_DynamicArmPlate.sldprt | 59 KB |
| 124 | 200_202_002_DynamicSandwichStandoff.sldprt | 55.5 KB |
| 125 | 200_202_003_DynamicRollerShaft.sldprt | 66.5 KB |
| 126 | 200_202_007_DynamicPivotShaft.sldprt | 73 KB |
| 127 | 200_202_009_DynamicRollerSpacer.491.sldprt | 58 KB |
| 128 | 200_202_010_SpringStandoff.sldprt | 56 KB |
| 129 | 200_202_011_SpringStandoff1.5.sldprt | 56 KB |
| 130 | 200_202_DynamicArmPivot.sldasm | 37.3 KB |
| 131 | 200_202_DynamicColsonShaft.sldasm | 35.6 KB |
| 132 | 200_202_LeftDynamicArm.sldasm | 40.3 KB |
| 133 | 200_202_RightDynamicArm.sldasm | 41 KB |
| 134 | 200_203_001_PancakeClevis.sldprt | 59 KB |
| 135 | 200_203_002_StopLiftRev2.sldprt | 61.5 KB |
| 136 | 200_203_003_PancakeMountingBracketRev2.sldprt | 63.5 KB |
| 137 | 200_203_004_PivotHardstopSnail.sldprt | 60.5 KB |
| 138 | 200_203_PancakeAssembly.sldasm | 34.1 KB |
| 139 | 200_203_PivotHardstopAssembly.sldasm | 35.6 KB |
| 140 | 200_Intake.sldasm | 60.7 KB |
| 141 | 20t Gear with 0.5 Hex Bore 217-2702.sldprt | 119 KB |
| 142 | 217-2589-001 Rev3.sldprt | 663 KB |
| 143 | 217-2625-003 Rev1.sldprt | 528 KB |
| 144 | 217-2625-005 Rev1_Planet_Revolving_Follower01.sldprt | 136 KB |
| 145 | 217-2625-007 Rev1_Public.sldprt | 151 KB |
| 146 | 217-2625-008 Rev1.sldprt | 112 KB |
| 147 | 217-2625-010 Rev1.sldprt | 55.5 KB |
| 148 | 217-2625-011 Rev1.sldprt | 59 KB |
| 149 | 217-2625-017 Rev1_9714K61.sldprt | 57 KB |
| 150 | 217-2625-018 Rev1_98541A410.sldprt | 61 KB |
| 151 | 217-2625-025 Rev1.sldprt | 111 KB |
| 152 | 217-2625-026 Rev1.sldprt | 90.5 KB |
| 153 | 217-2625-100.sldasm | 33.7 KB |
| 154 | 217-2742-001 Rev4.sldprt | 62 KB |
| 155 | 217-2778-NCQ8A075-050M_1032_Nut_90545A111.sldprt | 111 KB |
| 156 | 217-2778-NCQ8A075-050M_NCQ8 Rod_075M.sldprt | 59 KB |
| 157 | 217-2778-NCQ8A075-050M_NCQ8 Tube_075A.sldprt | 84.5 KB |
| 158 | 217-2778-NCQ8A075-050M_Snap Ring_075.sldprt | 59 KB |
| 159 | 217-2816-001 Rev1.sldprt | 204 KB |
| 160 | 217-2820 Rev1_Public.sldasm | 33.7 KB |
| 161 | 217-2822-003 Rev4.sldprt | 93 KB |
| 162 | 217-2860-001 Rev3.sldprt | 708 KB |
| 163 | 217-2860-011 Rev1.sldprt | 390 KB |
| 164 | 217-2860-STEP.sldasm | 32.5 KB |
| 165 | 217-2948-001 Rev1_40.sldprt | 107 KB |
| 166 | 217-2948-002 Rev1_L-1.sldprt | 103 KB |
| 167 | 217-2948-003 Rev1_SingleA.sldprt | 57.5 KB |
| 168 | 217-2948-004 Rev1_Std.sldprt | 69 KB |
| 169 | 217-2948-005 Rev1_P.sldprt | 55 KB |
| 170 | 217-2954-001 Rev1_41.sldprt | 213 KB |
| 171 | 217-2954-002 Rev1_1000-50A-N7.sldprt | 58 KB |
| 172 | 217-3195-010 Rev1.sldprt | 89.5 KB |
| 173 | 217-3195-200 Rev1.sldasm | 35.1 KB |
| 174 | 217-3351 Rev2.sldprt | 91.5 KB |
| 175 | 217-4649-001 Rev1.sldprt | 119 KB |
| 176 | 217-4649-002 Rev1_SSA0832-0500ZC.sldprt | 60 KB |
| 177 | 217-4649-006 Rev1_SSA0004-008BA.sldprt | 59 KB |
| 178 | 217-4649-007 Rev1_94105A824.sldprt | 63.5 KB |
| 179 | 22t Hub Sprocket #25 with 0.5 Hex Bore 217-2640.sldprt | 183 KB |
| 180 | 24t Gear with 0.5 Hex Bore 217-2704.sldprt | 127 KB |
| 181 | 2in Wheel Intergrated 0500 HEX Hub.sldprt | 221 KB |
| 182 | 300_Tool.sldasm | 75.8 KB |
| 183 | 301_001_First_Stage_Extrusion_Right.sldprt | 253 KB |
| 184 | 301_003_V2_A-Frame_Gusset.sldprt | 119 KB |
| 185 | 301_004_Bearing_Block_Insert.sldprt | 69 KB |
| 186 | 301_005_Bearing_Block_Outside.sldprt | 62 KB |
| 187 | 301_010_Lexan_Spacer.sldprt | 57.5 KB |
| 188 | 301_011_Bearing_Block_Outside_Spacer.sldprt | 55.5 KB |
| 189 | 301_012_Bearing_Block_Inside_Spacer.sldprt | 55.5 KB |
| 190 | 301_013_Nylon_Strap_Clamp.sldprt | 57 KB |
| 191 | 301_014_First_Stage_Extrusion_Left.sldprt | 236 KB |
| 192 | 301_Bearing_Block_Insert.sldasm | 36.5 KB |
| 193 | 301_Bearing_Block_Outside.sldasm | 36.1 KB |
| 194 | 301_Stage_1_V2.sldasm | 50.7 KB |
| 195 | 302_001_C-Channel.sldprt | 64.5 KB |
| 196 | 302_002_Bearing_Block_Insert_S2.sldprt | 62 KB |
| 197 | 302_003_Bottom_Block.sldprt | 82.5 KB |
| 198 | 302_004_Bearing_Block_Outside_S2.sldprt | 60.5 KB |
| 199 | 302_005_Top_Block.sldprt | 73 KB |
| 200 | 302_006_Bearing_Block_Outside_Spacer.sldprt | 55.5 KB |
| 201 | 302_007_Bearing_Block_Inside_Spacer.sldprt | 55.5 KB |
| 202 | 302_008_Spacer_Extrusion_Constant_Force_Springs.sldprt | 60.5 KB |
| 203 | 302_009_Spacer_Plate_Constant_Force_Springs.sldprt | 61 KB |
| 204 | 302_Bearing_Block_Insert_S2.sldasm | 36.4 KB |
| 205 | 302_Bearing_Block_Outside_S2.sldasm | 35.6 KB |
| 206 | 302_Stage_2.sldasm | 52.7 KB |
| 207 | 303_001_Carriage_Plate.sldprt | 76.5 KB |
| 208 | 303_003_Bearing_Plate.sldprt | 60.5 KB |
| 209 | 303_004_Bearing_Spacer.sldprt | 55.5 KB |
| 210 | 303_005_Bearing_Shaft.sldprt | 55.5 KB |
| 211 | 303_006_Bearing_Spacer.sldprt | 55.5 KB |
| 212 | 303_007_Carriage_Piston_Plate.sldprt | 58.5 KB |
| 213 | 303_008_Piston_Plate_Standoff.sldprt | 55.5 KB |
| 214 | 303_009_Piston_Plate_Extrusion.sldprt | 59 KB |
| 215 | 303_010_Piston_Plate_Extrusion_Inserts.sldprt | 57.5 KB |
| 216 | 303_011_Intake_Hardstop.sldprt | 63.5 KB |
| 217 | 303_012_Piston_Standoff.sldprt | 55.5 KB |
| 218 | 303_013_Intake_Pivot_Shaft.sldprt | 55.5 KB |
| 219 | 303_014_Intake_Pivot_Shaft_Spacer.sldprt | 55.5 KB |
| 220 | 303_015_Carriage_Standoff.sldprt | 55.5 KB |
| 221 | 303_016_Hardstop_Insert.sldprt | 58 KB |
| 222 | 303_017_Hardstop_Insert_Left.sldprt | 58 KB |
| 223 | 303_018_Carriage_Extrusion.sldprt | 65.5 KB |
| 224 | 303_019_Carriage_Bracing_Plate.sldprt | 63 KB |
| 225 | 303_020_Nylon_Strap_Clamp.sldprt | 57 KB |
| 226 | 303_Bearing_Assembly.sldasm | 35.5 KB |
| 227 | 303_Bearing_Assembly_Inside_2.sldasm | 37.5 KB |
| 228 | 303_Carriage.sldasm | 52.8 KB |
| 229 | 303_IntakePivot.sldasm | 40.9 KB |
| 230 | 304_001_Gearbox_Plate.sldprt | 117 KB |
| 231 | 304_002_Gearbox_Standoff.sldprt | 55.5 KB |
| 232 | 304_003_First_Stage_Shaft.sldprt | 67 KB |
| 233 | 304_004_Second_Stage_Output.sldprt | 72.5 KB |
| 234 | 304_005_Opposite_Plate.sldprt | 75 KB |
| 235 | 304_006_Encoder_Aluminum_Plate.sldprt | 60 KB |
| 236 | 304_007_Encoder_Lexan_Spacer.sldprt | 61 KB |
| 237 | 304_008_Encoder_Standoff.sldprt | 55.5 KB |
| 238 | 304_011_Opposite_Plate_Other_Side.sldprt | 80.5 KB |
| 239 | 304_013_Second_Stage_Custom_Spacer.sldprt | 57.5 KB |
| 240 | 304_014_Encoder_Custom_Spacer.sldprt | 63 KB |
| 241 | 304_015_Tower_Gusset_Bottom.sldprt | 71.5 KB |
| 242 | 304_016_Tower_Mounting_Gearbox_Plate.sldprt | 137 KB |
| 243 | 304_017_Top_Sprocket_Angle_Bracket.sldprt | 60 KB |
| 244 | 304_017_Top_Sprocket_C_Channel.sldprt | 61 KB |
| 245 | 304_018_Bored_Top_Sprocket.sldprt | 183 KB |
| 246 | 304_019_Top_Sprocket_Shaft.sldprt | 55.5 KB |
| 247 | 304_020_Top_Sprocket_Spacer_One.sldprt | 57.5 KB |
| 248 | 304_021_Top_Sprocket_Spacer_Two.sldprt | 57.5 KB |
| 249 | 304_022_Chain_Clamp_Male.sldprt | 69 KB |
| 250 | 304_023_Chain_Clamp_Female.sldprt | 59 KB |
| 251 | 304_024_Pseudo_Chain.sldprt | 58 KB |
| 252 | 304_CIM_Assembly.sldasm | 34.8 KB |
| 253 | 304_Chain_Clamp.sldasm | 36 KB |
| 254 | 304_Encoder_Side.sldasm | 44.9 KB |
| 255 | 304_First_Stage.sldasm | 35.4 KB |
| 256 | 304_Gearbox.sldasm | 53 KB |
| 257 | 304_Second_Stage.sldasm | 39 KB |
| 258 | 304_Top_Sprocket.sldasm | 40.8 KB |
| 259 | 305_001_Constant_Force_Springs.sldprt | 55.5 KB |
| 260 | 305_002_Spool_Insert.sldprt | 58 KB |
| 261 | 305_003_Spool_Plates.sldprt | 57 KB |
| 262 | 305_004_Spool_L-Bracket.sldprt | 58 KB |
| 263 | 305_Constant_Force_Springs.sldasm | 34.6 KB |
| 264 | 30t Gear with 0.5 Hex Bore 217-2705.sldprt | 146 KB |
| 265 | 30t_Aluminum_Plate_Sprocket_35_Chain_1-1_8_Bearing_Bore_217-2652.sldprt | 252 KB |
| 266 | 400_Hanger_Arm.sldasm | 42.5 KB |
| 267 | 401_001_Rod_Head.sldprt | 57 KB |
| 268 | 401_002_Fixed_Hook.sldprt | 66 KB |
| 269 | 401_003_Pivot_Hook.sldprt | 66 KB |
| 270 | 401_004_Trap_Bar.sldprt | 62.5 KB |
| 271 | 401_005_Fixed_Hook_Brace.sldprt | 60.5 KB |
| 272 | 401_006_Pivot_Hook_Brace.sldprt | 61 KB |
| 273 | 401_007_Fixed_Hook_Spacer.sldprt | 55.5 KB |
| 274 | 401_008_Pivot_Hook_Spacer.sldprt | 55.5 KB |
| 275 | 401_010_Ratchet_Holder_Plate.sldprt | 58 KB |
| 276 | 401_011_Lock_Spacer.sldprt | 55.5 KB |
| 277 | 401_012_Ratchet_Shaft.sldprt | 56.5 KB |
| 278 | 401_013_Trap_Bar_Spacer.sldprt | 55.5 KB |
| 279 | 401_014_Washer.sldprt | 55 KB |
| 280 | 401_Claw.sldasm | 41.8 KB |
| 281 | 402_003_Mounting_Insert.sldprt | 58 KB |
| 282 | 402_004_Planetary_Mount.sldprt | 131 KB |
| 283 | 402_005_0.5_HexShaft.sldprt | 59 KB |
| 284 | 402_006_Hex_Adapter.sldprt | 61.5 KB |
| 285 | 402_008_Angle_Bracket.sldprt | 58.5 KB |
| 286 | 402_010_Piston_Standoff.sldprt | 55.5 KB |
| 287 | 402_011_Brace_Extrusion.sldprt | 124 KB |
| 288 | 402_013_Second_Stage_Extrusion.sldprt | 88.5 KB |
| 289 | 402_017_Piston_Mounting_Plate.sldprt | 60 KB |
| 290 | 402_Arm_Assembly.sldasm | 44.7 KB |
| 291 | 402_Cascading_Arm.sldasm | 35.5 KB |
| 292 | 404_001_Side_Plates.sldprt | 69 KB |
| 293 | 404_002_Side_Plate_Bushings.sldprt | 56 KB |
| 294 | 404_003_Stabilizer_Plate.sldprt | 59.5 KB |
| 295 | 404_004_Pivot_Shaft.sldprt | 56.5 KB |
| 296 | 404_005_Hard_Stop.sldprt | 55.5 KB |
| 297 | 404_006_Standoffs.sldprt | 56 KB |
| 298 | 404_007_Extrusion.sldprt | 69.5 KB |
| 299 | 404_008_Extrusion_Insert.sldprt | 58.5 KB |
| 300 | 404_009_Piston_Mounting_Plate.sldprt | 60 KB |
| 301 | 404_010_Piston_Standoff.sldprt | 55.5 KB |
| 302 | 404_011_Piston_Extension.sldprt | 55.5 KB |
| 303 | 404_012_Mounting_Plate_Right.sldprt | 70.5 KB |
| 304 | 404_013_Mounting_Plate_Left.sldprt | 70.5 KB |
| 305 | 404_014_A_Frame_Inside_Gusset.sldprt | 69.5 KB |
| 306 | 404_014_V2_A-Frame_Extrusion.sldprt | 160 KB |
| 307 | 404_Back_Stabilizer.sldasm | 46.8 KB |
| 308 | 405_001_A-Frame_Mount.sldprt | 98 KB |
| 309 | 405_002_Plate_Standoff.sldprt | 55.5 KB |
| 310 | 405_003_Support_Standoff.sldprt | 55.5 KB |
| 311 | 405_004_Drum.sldprt | 57.5 KB |
| 312 | 405_005_GuidePlate.sldprt | 58 KB |
| 313 | 405_006_Ratchet.sldprt | 75 KB |
| 314 | 405_007_Hex_Shaft.sldprt | 59 KB |
| 315 | 405_009_Ratchet_Hook.sldprt | 60 KB |
| 316 | 405_010_Ratchet_Spacer.sldprt | 57.5 KB |
| 317 | 405_011_Ratchet_Hook_Spacer.sldprt | 55.5 KB |
| 318 | 405_012_Hook_Elastic_Standoff.sldprt | 55.5 KB |
| 319 | 405_013_Washer.sldprt | 55 KB |
| 320 | 405_014_Elastic_Standoff.sldprt | 55.5 KB |
| 321 | 405_015_Hardstop_Standoff.sldprt | 55.5 KB |
| 322 | 405_016_A-Frame_Mount_Sprocket.sldprt | 102 KB |
| 323 | 405_017_Sprocket_Mount.sldprt | 78.5 KB |
| 324 | 405_018_Sprocket_Standoff.sldprt | 55.5 KB |
| 325 | 405_019_PseudoChain.sldprt | 58.5 KB |
| 326 | 405_A-Frame.sldasm | 68.7 KB |
| 327 | 405_Pulley.sldasm | 36.5 KB |
| 328 | 44t Gear with 0.5 Hex Bore 217-2710.sldprt | 170 KB |
| 329 | 48t Gear with 0.5 Hex Bore & VersaKeys 217-3218.sldprt | 207 KB |
| 330 | 4IN Compliant Wheel FINAL Overmold.sldprt | 139 KB |
| 331 | 50T dog gear-217-3419.sldprt | 197 KB |
| 332 | 50t Gear with 0.5 Hex Bore & VersaKeys 217-2712.sldprt | 218 KB |
| 333 | 6 Inch Traction Wheel Assembly.sldasm | 40.3 KB |
| 334 | 6338K573_OIL-EMBEDDED FLANGED SLEEVE BEARING.sldprt | 56.5 KB |
| 335 | 6StationManifold+Solenoids.sldasm | 36.2 KB |
| 336 | 6StationManifold.sldasm | 35.1 KB |
| 337 | 832-2250-Base-Kit-Screw_SSA0832-0500ZC.sldprt | 59.5 KB |
| 338 | 8mm_spring_clip(CIM).sldprt | 75.5 KB |
| 339 | 9044K377_MUSIC WIRE ULTRA-PRECISION EXTENSION SPRING.sldprt | 124 KB |
| 340 | 91251A107_91251A107.sldprt | 126 KB |
| 341 | BEAM-0750.sldprt | 62 KB |
| 342 | BUSS-BASE.sldprt | 155 KB |
| 343 | BUSS-COVER.sldprt | 344 KB |
| 344 | BUSS-RIVET.sldprt | 55.5 KB |
| 345 | BUSS-SAFTY-TRIP.sldprt | 59.5 KB |
| 346 | BUSS-STUD-250X50.sldprt | 56 KB |
| 347 | BaneBot1.875.sldprt | 71.5 KB |
| 348 | Button Head 0.25-20 Thread,0.75 Length.sldprt | 119 KB |
| 349 | Button Head 0.25-20 Thread,1.375 Length.sldprt | 200 KB |
| 350 | Button Head 0.25-20 Thread,1.50 Length.sldprt | 219 KB |
| 351 | C-175-DP0000_rod.sldprt | 58 KB |
| 352 | Cim Motor 217-2000.sldprt | 68.5 KB |
| 353 | Colson Performa 4 x 0.875 0.500 Hex 217-4049.sldprt | 84 KB |
| 354 | D-14053.sldprt | 66 KB |
| 355 | D-154.sldprt | 64 KB |
| 356 | D-358.sldprt | 55.5 KB |
| 357 | D-5867.sldprt | 66 KB |
| 358 | D-8383.sldprt | 57 KB |
| 359 | D-D0144-SS-1_25-bif.sldprt | 59 KB |
| 360 | DogBolt-217-3423-014.sldprt | 149 KB |
| 361 | DogGearPin-217-3423-008.sldprt | 61.5 KB |
| 362 | DogGearShim-217-3423-004.sldprt | 55.5 KB |
| 363 | DogShifter-217-3423-009.sldprt | 74.5 KB |
| 364 | Electrical_CircuitBreaker_TSC_CB3-SM-120.sldasm | 37.9 KB |
| 365 | FO-021-MT.sldasm | 34.9 KB |
| 366 | FO-0211_809MT-00_rod-bif.sldprt | 61 KB |
| 367 | Flanged Bearing - 0.375 x 0.875 x 0.280 217-2733.sldprt | 57 KB |
| 368 | Flanged Bearing - 0.500 (Hex) x 1.125 x 0.313 217-2734.sldprt | 59.5 KB |
| 369 | Flanged Bearing - 0.500 x 1.125 x 0.313 217-2731.sldprt | 57 KB |
| 370 | Hexagon Socket Button Head Cap Screw - Inch 6 - 32 x 1_4.sldprt | 63 KB |
| 371 | Hexagon Socket Head Cap Screw - Inch No. 5 - 40 UNC - 1 1_2.sldprt | 63 KB |
| 372 | Indented Large Hex Head Machine Screw - Inch 8-32 UNC - 1.25.sldprt | 62.5 KB |
| 373 | Mag_Encoder.sldprt | 236 KB |
| 374 | Mag_Encoder_Magnet.sldprt | 56.5 KB |
| 375 | Mini CIM 217-3371.sldprt | 66.5 KB |
| 376 | NUT-832-NYLOCK.sldprt | 65.5 KB |
| 377 | PCM.sldprt | 4.06 MB |
| 378 | PDP_rev_1.0.sldprt | 6.53 MB |
| 379 | POST0_5625-0_875-bif.sldprt | 55.5 KB |
| 380 | PTO_Cylinder_Assembly_217-2778-001.sldasm | 33.3 KB |
| 381 | PTO_Cylinder_Assembly_217-2778-001_1.sldasm | 32.7 KB |
| 382 | PTO_Cylinder_Mounting_Plate-217-3423-005.sldprt | 62 KB |
| 383 | Pancake Cylinder217-2778-NCQ8A075-050M_1032_Nut_90545A111.sldprt | 111 KB |
| 384 | Pancake Cylinder217-2778-NCQ8A075-050M_NCQ8 Rod_075M.sldprt | 59.5 KB |
| 385 | Pancake Cylinder217-2778-NCQ8A075-050M_NCQ8 Tube_075A.sldprt | 85 KB |
| 386 | Pancake Cylinder217-2778-NCQ8A075-050M_Snap Ring_075.sldprt | 59.5 KB |
| 387 | Pancake CylinderPancake_Pneumatic_Cylinder_217-2778.sldasm | 34.1 KB |
| 388 | Pneumatic_Compressor_VIAIR_00090.sldasm | 39.6 KB |
| 389 | Pneumatic_VIAIAR_00090_05.sldprt | 59 KB |
| 390 | Pneumatic_VIAIR_Fitting.sldprt | 60.5 KB |
| 391 | Pneumatics_VIAIR_00090_02.sldprt | 60 KB |
| 392 | Pneumatics_VIAIR_00090_03.sldprt | 55 KB |
| 393 | Pneumatics_VIAIR_0090_01.sldprt | 64.5 KB |
| 394 | Pneumatics_VIAIR_0090_02.sldprt | 65.5 KB |
| 395 | Pneumatics_VIAIR_0090_04.sldprt | 802 KB |
| 396 | Pneumatics_VIAIR_Fitting_01.sldprt | 60 KB |
| 397 | Radial Bearing - 0.25 x 0.75 x .28125.sldprt | 101 KB |
| 398 | Radial Bearing - 0.250 x 0.500 x 0.188 217-3489.sldprt | 60.5 KB |
| 399 | Radial Bearing - 0.500 x 1.125 x .313 217-2743.sldprt | 89.5 KB |
| 400 | SCREW-832-1250.sldprt | 62 KB |
| 401 | Socket Head Cap screw 10-32 thread, .75 length91251A345.sldprt | 105 KB |
| 402 | Solenoid.sldasm | 36.1 KB |
| 403 | Steel Flat-Head Socket Cap Screw 10-24 Thread, 0.75 Inch Length 92210A245_18-8 S.sldprt | 150 KB |
| 404 | Steel Flat-Head Socket Cap Screw, 10-24 Thread, 1.5 Length, Black Oxide 91253A251.sldprt | 102 KB |
| 405 | Steel Nylon-Insert Hex Locknut, 10-24 Thread Size, 38 Width, 1564 Height 90631A011.sldprt | 86 KB |
| 406 | Steel Socket Head Cap Screw 10-24 Thread, 2.25 Length 91251A254.sldprt | 120 KB |
| 407 | Steel Socket Head Cap Screw 10-24 Thread, 3.25 Length 91251A980.sldprt | 102 KB |
| 408 | Steel Socket Head Cap Screw 10-24, 3.5 Inch Length 90128A238_ZNC-PLTD ALLO.sldprt | 287 KB |
| 409 | Steel Socket Head Cap Screw, 0.25-20 Thread, 2.5 Length.sldprt | 118 KB |
| 410 | Steel Socket Head Cap Screw, 10-24 Thread, 0.5 Length 91251A242.sldprt | 86 KB |
| 411 | Steel Socket Head Cap Screw, 10-24 Thread, 0.75 Length91251A245.sldprt | 96 KB |
| 412 | Steel Socket Head Cap Screw, 10-24 Thread, 1 Length.sldprt | 159 KB |
| 413 | Steel Socket Head Cap Screw, 10-24 Thread, 1.5 Length 91251A251.sldprt | 102 KB |
| 414 | Steel Socket Head Cap Screw, 10-24 Thread, 1.625 Length.sldprt | 165 KB |
| 415 | Steel Socket Head Cap Screw, 10-24 Thread, 1.875 Length.sldprt | 165 KB |
| 416 | Steel Socket Head Cap Screw, 10-24 Thread, 2 Length 91251A253.sldprt | 102 KB |
| 417 | Talon SRX.sldprt | 1.96 MB |
| 418 | Tank.sldprt | 56 KB |
| 419 | Thunderhex .541.sldprt | 66 KB |
| 420 | Timing Pulley (HTD 5mm) - 18T, 9mm Double Flange, 0.5 Hex 217-3225.sldprt | 189 KB |
| 421 | Timing Pulley (HTD 5mm) - 24T, 9mm Double Flange, 0.5 Hex 217-3227.sldprt | 253 KB |
| 422 | VRM_part.sldprt | 2.56 MB |
| 423 | VersaHub 217-2592.sldprt | 84 KB |
| 424 | VersaPlanetary_v2_Two_Stage_100_1_with_BAG.sldasm | 45.1 KB |
| 425 | am-3480+4IN+500Hex+Bore+Compliant+Wheel.sldasm | 32.9 KB |
| 426 | battery.sldprt | 62 KB |
| 427 | cd_roborio.sldprt | 10.4 MB |
| 428 | local.ANSI.1001.10.2.sldprt | 64 KB |
| 429 | local.ANSI.1059.80.1.sldprt | 76 KB |
| 430 | 【 屿双网 www.ysh3d.com 】 更多【资料】【图档】.url | 177 B |
| 431 | 公众号免费下载.jpg | 79 KB |
| 432 | 户外排爆救援机器人设计模型.SLDASM | 23.6 MB |
免责申明:
本网站模型由用户自行上传，如权利人发现存在误传其作品情形，请及时与本站联系。
免费下载
此图纸可免费下载
图纸ID：554359
文件大小：65.11M
软件版本：SOLIDWORKS 2016
图纸格式：sldprt,sldasm
参数/编辑：可修改，包括参数
上传时间：2024-02-23
图纸介绍：
发布者
屿双网小匠
作品: 13827
粉丝: 65
提示
×
下载该图档需要消耗0金币！
确认下载
客服
签到
分享
