微信扫码登录
作者其它图纸
查看更多
猜你喜欢
活动福利+发布图纸
登录注册
2023 FRC 2051机器人Derrick比赛小车（ID:559382）
110
0
0
| # | 文件名称 | 文件大小 |
|---|---|---|
| 1 | #10 General Purpose Washer.SLDPRT | 54.7 KB |
| 2 | #10 ID, .500 OD, .438in LG Aluminum Unthreaded Spacer.SLDPRT | 197 KB |
| 3 | #4-40 SHCS, Grade 8 Steel Rev2_SSA0440-0125ZB.sldprt | 35.4 KB |
| 4 | +必看说明+.txt | 2.22 KB |
| 5 | .125NPT x .25in Right Angle Fitting.SLDPRT | 320 KB |
| 6 | .25 ID x .375 OD x .375 LG Flanged Oilite Bushing.SLDPRT | 107 KB |
| 7 | .25-20 Nylock Nut.SLDPRT | 246 KB |
| 8 | .250 ID x .375 OD x .032 THK Steel Shim.SLDPRT | 66.6 KB |
| 9 | .250 ID x .375 OD x .06 THK Steel Shim.SLDPRT | 69.7 KB |
| 10 | .25in General Purpose Washer.SLDPRT | 89.9 KB |
| 11 | .313-18 Nylock Nut.SLDPRT | 237 KB |
| 12 | .375 Delrin Hex Shaft Spacer.SLDPRT | 103 KB |
| 13 | .375 ID x .500 OD x .375 LG Flanged Oilite Bushing.SLDPRT | 90.2 KB |
| 14 | .375 ID x .500 OD x .375 LG Oilite Bushing.SLDPRT | 111 KB |
| 15 | .375 ID x .563 OD x .06 THK Steel Shim.SLDPRT | 67.7 KB |
| 16 | .500 Delrin Hex Shaft Spacer.SLDPRT | 390 KB |
| 17 | .875 ID x 1.375 OD x .012 THK SS Shim.SLDPRT | 61.9 KB |
| 18 | 0.250 ID x 0.500 OD x 0.188 WD (Flanged Bearing) (WCP-0072).SLDPRT | 586 KB |
| 19 | 0.250_ ID x 0.500_ OD x 0.188_ WD (Radial Bearing) (217-3489).SLDPRT | 174 KB |
| 20 | 0.250_ ID x 0.625_ OD x 0.196_ WD (Radial Bearing) (WCP-0041).SLDPRT | 647 KB |
| 21 | 0.250_ ID x 0.750_ OD x 0.282_ WD (Radial Bearing) (WCP-0212).SLDPRT | 160 KB |
| 22 | 10-32 Nylock Nut.SLDPRT | 244 KB |
| 23 | 12t Steel Double Hub Sprocket (#25 Chain, 1_2in ThunderHex Bore) (WCP-0576).SLDPRT | 260 KB |
| 24 | 12t Steel Hub Sprocket (#35 Steel, .50 in Hex Bore) (WCP-0758).SLDPRT | 230 KB |
| 25 | 12t x 9mm Wide Double Flange Aluminum Pulley (GT2 3mm, RS550 Motor) (217-5870).SLDPRT | 182 KB |
| 26 | 13.75mm (1_2_ ThunderHex ID) x 1.125_ OD x 0.313_ WD (Flanged Bearing) (217-4006).SLDPRT | 229 KB |
| 27 | 18T Aluminum Hub Double Sprocket (#25 Chain, 1_2 Hex Bore) (217-7373).SLDPRT | 537 KB |
| 28 | 18T Aluminum Hub Sprocket (#25 Chain, 1_2 Hex Bore) (217-3488).SLDPRT | 276 KB |
| 29 | 18T Aluminum Spur Gear (20 DP, 1_2_ Hex Bore) (217-3209).SLDPRT | 212 KB |
| 30 | 18T x 15mm Wide Double Flange Aluminum Pulley (HTD 5mm, 1_2” Hex Bore) (WCP-0605).SLDPRT | 468 KB |
| 31 | 1_2_Hex_Bore_Aluminum_VersaHub_217-2592.SLDPRT | 195 KB |
| 32 | 2023_01_16_02_14_24_0954.SLDPRT | 66.6 KB |
| 33 | 2023_01_16_02_14_24_0985.SLDPRT | 87.2 KB |
| 34 | 2023_01_16_02_14_25_0016.SLDPRT | 63.1 KB |
| 35 | 2023_01_16_02_14_25_0048.SLDPRT | 24.6 KB |
| 36 | 2023_01_16_02_14_25_0079.SLDPRT | 66.5 KB |
| 37 | 2023_01_16_02_14_25_0110.SLDPRT | 66.6 KB |
| 38 | 2023_01_16_02_14_25_0141.SLDPRT | 24.5 KB |
| 39 | 217-2000.sldprt | 133 KB |
| 40 | 217-2428-027 Rev1_97414A630.sldprt | 28.3 KB |
| 41 | 217-2614-002_98430A132.sldprt | 80.6 KB |
| 42 | 217-2625-005 Rev1_Planet_Revolving_Follower01.SLDPRT | 130 KB |
| 43 | 217-2625-007 Rev1_Sun_Driver01.sldprt | 184 KB |
| 44 | 217-2625-008 Rev1.SLDPRT | 184 KB |
| 45 | 217-2625-009 Rev1.sldprt | 224 KB |
| 46 | 217-2625-010 Rev1.sldprt | 29 KB |
| 47 | 217-2625-011 Rev1.sldprt | 28.1 KB |
| 48 | 217-2625-017 Rev1_9714K61.sldprt | 80.8 KB |
| 49 | 217-2625-018 Rev1_98541A410.sldprt | 33.9 KB |
| 50 | 217-2625-025 Rev1.sldprt | 184 KB |
| 51 | 217-2625-026 Rev1.sldprt | 175 KB |
| 52 | 217-2625-100.sldasm | 37.9 KB |
| 53 | 217-2731.sldprt | 28.3 KB |
| 54 | 217-2733.sldprt | 31 KB |
| 55 | 217-2734.sldprt | 33.4 KB |
| 56 | 217-2737, .500 Hex Collar Thin.SLDPRT | 599 KB |
| 57 | 217-2739, .375 Hex Collar Thin.SLDPRT | 577 KB |
| 58 | 217-2741.sldprt | 32 KB |
| 59 | 217-2742.sldprt | 117 KB |
| 60 | 217-2743.sldprt | 60.5 KB |
| 61 | 217-2758-001 Rev1.sldprt | 30.2 KB |
| 62 | 217-2761-001 rev1.sldprt | 28.8 KB |
| 63 | 217-2778-001 Rev2_NCQ8A075-050M.sldasm | 160 KB |
| 64 | 217-2778-NCQ8A075-050M_1032_Nut_90545A111.sldprt | 62.2 KB |
| 65 | 217-2778-NCQ8A075-050M_NCQ8 Rod_075M.sldprt | 30.5 KB |
| 66 | 217-2778-NCQ8A075-050M_NCQ8 Tube_075A.sldprt | 57.5 KB |
| 67 | 217-2778-NCQ8A075-050M_Snap Ring_075.sldprt | 30.1 KB |
| 68 | 217-2816-001 Rev1.sldprt | 343 KB |
| 69 | 217-2954-001 Rev1_41.sldprt | 417 KB |
| 70 | 217-2954-002 Rev1_1000-50A-N7.sldprt | 115 KB |
| 71 | 217-3100-001_14t.sldprt | 177 KB |
| 72 | 217-3106-000 Rev2_NO SUN.sldasm | 41.8 KB |
| 73 | 217-3106-001 Rev1_Sun_Driver01.sldprt | 183 KB |
| 74 | 217-3106-002 Rev1_Planet_Revolving_Follower01.sldprt | 141 KB |
| 75 | 217-3106-003 Rev1.sldprt | 91.6 KB |
| 76 | 217-3141-001 Rev1.sldprt | 116 KB |
| 77 | 217-3141-002 Rev2.sldprt | 91.1 KB |
| 78 | 217-3141-006 Rev1_30T 32DP.sldprt | 218 KB |
| 79 | 217-3141-007 Rev1_30T 32DP.sldprt | 245 KB |
| 80 | 217-3195-010 Rev1.sldprt | 72 KB |
| 81 | 217-3195-200 Rev1.sldasm | 61.3 KB |
| 82 | 217-3210-001 Rev1_30t.sldprt | 138 KB |
| 83 | 217-3215-001 Rev1_42t.sldprt | 164 KB |
| 84 | 217-3233-001 Rev1_40.sldprt | 77.2 KB |
| 85 | 217-3233-002 Rev1_L-1.sldprt | 185 KB |
| 86 | 217-3233-003 Rev1_SingleA.sldprt | 28.9 KB |
| 87 | 217-3233-003 Rev1_SingleB.sldprt | 27.4 KB |
| 88 | 217-3233-004 Rev1_Std.sldprt | 38.1 KB |
| 89 | 217-3233-005 Rev1_P.sldprt | 25.9 KB |
| 90 | 217-3256-001 Rev1.sldprt | 30.9 KB |
| 91 | 217-3257-001 Rev1.sldprt | 29.8 KB |
| 92 | 217-3259-001 Rev1.sldprt | 29.2 KB |
| 93 | 217-3263-001 Rev1.sldprt | 29.3 KB |
| 94 | 217-3351.sldprt | 144 KB |
| 95 | 217-3414-001 Rev1_14t Steel Pinion.sldprt | 79.8 KB |
| 96 | 217-3418-001 Rev2_44t.sldprt | 174 KB |
| 97 | 217-3420-001 Rev2_60t.sldprt | 401 KB |
| 98 | 217-3421-007 Rev1.sldprt | 82.4 KB |
| 99 | 217-3421-009 Rev1.sldprt | 37.5 KB |
| 100 | 217-3421-010 Rev1.sldprt | 69 KB |
| 101 | 217-3421-011 Rev2_97633A200.sldprt | 95.7 KB |
| 102 | 217-3422-004 Rev2.sldprt | 37 KB |
| 103 | 217-3422-007 Rev1.sldprt | 34.1 KB |
| 104 | 217-3423-001 Rev1_Default_As Machined_.sldprt | 107 KB |
| 105 | 217-3423-003 Rev1.sldprt | 362 KB |
| 106 | 217-3423-004 Rev1.sldprt | 28.4 KB |
| 107 | 217-3423-005 Rev1.sldprt | 111 KB |
| 108 | 217-3423-006 Rev1.sldprt | 92.1 KB |
| 109 | 217-3423-008 Rev1.sldprt | 98.1 KB |
| 110 | 217-3423-009 Rev3.sldprt | 126 KB |
| 111 | 217-3423-014 Rev1.sldprt | 303 KB |
| 112 | 217-3423-016 Rev1.sldprt | 118 KB |
| 113 | 217-3424-001 Rev1.sldprt | 29.8 KB |
| 114 | 217-3424-002 Rev1.sldprt | 29.7 KB |
| 115 | 217-3424-003 Rev1.sldprt | 33.8 KB |
| 116 | 217-3424-004 Rev1.sldprt | 35.8 KB |
| 117 | 217-3424-005 Rev1.sldprt | 31.3 KB |
| 118 | 217-3431-STEP.step.SLDPRT | 185 KB |
| 119 | 217-3436-001 Rev2.sldprt | 73.3 KB |
| 120 | 217-3436-002 Rev2.sldprt | 72 KB |
| 121 | 217-3489.sldprt | 156 KB |
| 122 | 217-4649-007 Rev1_94105A824.sldprt | 37.1 KB |
| 123 | 217-6515-001 Rev6.sldprt | 557 KB |
| 124 | 217-6515-002 Rev6.sldprt | 202 KB |
| 125 | 217-6515-005 Rev4_7804K116.sldprt | 55.7 KB |
| 126 | 217-6515-010 Rev1_9262K442.sldprt | 27 KB |
| 127 | 217-6515-201 Rev6.SLDPRT | 154 KB |
| 128 | 217-6515-202 Rev6.SLDPRT | 36.2 KB |
| 129 | 217-6515-308 Rev5.sldprt | 158 KB |
| 130 | 217-6515-Back 20190920.sldprt | 7.23 MB |
| 131 | 28T Aluminum Spur Gear (20 DP, 3_8 Hex Bore) (217-5454).SLDPRT | 204 KB |
| 132 | 2K Ohm 1 Turn Pot.SLDPRT | 185 KB |
| 133 | 30T Aluminum Spur Gear (20 DP, 1_2_ Hex Bore) (217-2705).SLDPRT | 245 KB |
| 134 | 36T x 9mm Wide Double Flange Aluminum Pulley (GT2 3mm, 1_2_ Hex Bore) (217-5873).SLDPRT | 258 KB |
| 135 | 375 HEX OUTPUT SHAFT.SLDPRT | 1.03 MB |
| 136 | 4-40 Nylock Nut.SLDPRT | 219 KB |
| 137 | 48435K714_EXTENDED-LIFE ASME-CODE POP-SAFETY VALVE.SLDPRT | 1.08 MB |
| 138 | 500 HEX OUTPUT SHAFT.SLDPRT | 1.23 MB |
| 139 | 500 WITH 125 KEYWAY OUTPUT SHAFT.SLDPRT | 1.23 MB |
| 140 | 52T Aluminum Spur Gear (20 DP, 1_2 Hex Bore) (217-5473).SLDPRT | 287 KB |
| 141 | 550 MOUNTING PLATE.SLDPRT | 133 KB |
| 142 | 5k Ohm 10 Turn Pot (Bourns 3540S-1-502L).SLDPRT | 123 KB |
| 143 | 6-32 Nylock Nut.SLDPRT | 252 KB |
| 144 | 6009320384.step.SLDPRT | 132 KB |
| 145 | 6009321584.step.SLDPRT | 73.7 KB |
| 146 | 6020073344.step.SLDPRT | 73.1 KB |
| 147 | 6020075024.step.SLDPRT | 132 KB |
| 148 | 6020076064.step.SLDPRT | 128 KB |
| 149 | 6020077104.step.SLDPRT | 74.7 KB |
| 150 | 6020078944.step.SLDPRT | 78.7 KB |
| 151 | 6020079344.step.SLDPRT | 73.3 KB |
| 152 | 6020080464.step.SLDPRT | 73.6 KB |
| 153 | 6020416016.step.SLDPRT | 79.1 KB |
| 154 | 60T x 9mm Wide Double Flange Aluminum Pulley (GT2 3mm, 1_2_ Hex Bore) (217-5876).SLDPRT | 552 KB |
| 155 | 6115118912.step.SLDPRT | 133 KB |
| 156 | 6115132832.step.SLDPRT | 133 KB |
| 157 | 6115135872.step.SLDPRT | 65.1 KB |
| 158 | 64t Aluminum Plate Sprocket (#35 Chain, 1.125in Bearing Bore) (am-4799).SLDPRT | 1.19 MB |
| 159 | 64t Pocketed Steel Spur Gear (20 DP, 1_2 Hex Bore) (WCP-0293).SLDPRT | 447 KB |
| 160 | 700 Ohm 1 Turn Pot.SLDPRT | 191 KB |
| 161 | 7081847264.step.SLDPRT | 110 KB |
| 162 | 7081847344.step.SLDPRT | 79 KB |
| 163 | 7081847424.step.SLDPRT | 79.7 KB |
| 164 | 7082007024.step.SLDASM | 57.7 KB |
| 165 | 7164552208.step.SLDASM | 57.9 KB |
| 166 | 7164553088.step.SLDPRT | 51.5 KB |
| 167 | 7164554288.step.SLDPRT | 53.6 KB |
| 168 | 7164554928.step.SLDASM | 57.4 KB |
| 169 | 7164555968.step.SLDPRT | 53.3 KB |
| 170 | 7164558608.step.SLDPRT | 591 KB |
| 171 | 74479787147.step.SLDPRT | 31 KB |
| 172 | 775 MOUNTING PLATE.SLDPRT | 154 KB |
| 173 | 8-32 Nylock Nut.SLDPRT | 258 KB |
| 174 | 84t Aluminum Spur Gear (20 DP, 1_2 Hex Bore) (WCP-0730).SLDPRT | 460 KB |
| 175 | 91251A107_91251A107.sldprt | 99.3 KB |
| 176 | 91251A346_91251A346.sldprt | 116 KB |
| 177 | 9293K56_Constant-Force Spring.SLDPRT | 236 KB |
| 178 | 98320A133_ZINC-PLATED STEEL QUICK-RELEASE PIN.SLDPRT | 456 KB |
| 179 | 9T Steel Spur Gear (20 DP, 10T Center Distance, CIM Motor) (217-6335).SLDPRT | 152 KB |
| 180 | A12030DP-M-MainBody.SLDPRT | 80.2 KB |
| 181 | A12030DP-M-Rod.SLDPRT | 60.7 KB |
| 182 | A12030DP-M.SLDASM | 184 KB |
| 183 | A17020DP-MainBody.SLDPRT | 77.7 KB |
| 184 | A17020DP-PIN.SLDPRT | 25.9 KB |
| 185 | A17020DP-Rod.SLDPRT | 62.7 KB |
| 186 | A17020DP.SLDASM | 176 KB |
| 187 | AM-2380.SLDPRT | 389 KB |
| 188 | ARC-14-28.SLDPRT | 302 KB |
| 189 | Access Point Mounting Bracket.SLDPRT | 126 KB |
| 190 | Aluminum Tube, .375in OD, .201in ID.SLDPRT | 1.4 MB |
| 191 | ArduCam Arm Mount.SLDPRT | 106 KB |
| 192 | ArduCam B0332 Camera.SLDASM | 1.26 MB |
| 193 | ArduCam Back Housing.SLDPRT | 110 KB |
| 194 | ArduCam Bottom Mount.SLDPRT | 115 KB |
| 195 | ArduCam Front Housing.SLDPRT | 175 KB |
| 196 | Arm Base Stage.SLDPRT | 1.74 MB |
| 197 | Arm End Stage.SLDPRT | 1.62 MB |
| 198 | Arm Middle Stage.SLDPRT | 787 KB |
| 199 | Arm Pivot Angle Lower Plate.SLDPRT | 108 KB |
| 200 | Arm Pivot Angle Support.SLDPRT | 512 KB |
| 201 | Arm Pivot Angle Upper Plate.SLDPRT | 118 KB |
| 202 | Arm Pivot Assembly.SLDASM | 5.92 MB |
| 203 | Arm Pivot Bearing Support.SLDPRT | 303 KB |
| 204 | Arm Pivot Drive Shaft.SLDPRT | 134 KB |
| 205 | Arm Pivot Gearbox Assembly.SLDASM | 1.83 MB |
| 206 | Arm Pivot Gearbox Plate.SLDPRT | 1.06 MB |
| 207 | Arm Pivot Idler Shaft.SLDPRT | 127 KB |
| 208 | Arm Pivot Pneumatic Cylinder Support.SLDPRT | 129 KB |
| 209 | Arm Pivot Potentiometer Plate.SLDPRT | 158 KB |
| 210 | Arm Pivot Potentiometer Shaft Adapter V2.SLDPRT | 103 KB |
| 211 | Arm Pivot Side Angle Support Lower Mount.SLDPRT | 191 KB |
| 212 | Arm Pivot Side Angle Support Upper Mount.SLDPRT | 236 KB |
| 213 | Arm Pivot Side Angle Support.SLDPRT | 125 KB |
| 214 | B4B-ZR.step.SLDPRT | 50.8 KB |
| 215 | BAG MOUNTING PLATE.SLDPRT | 119 KB |
| 216 | BANEBOTS_RS550.sldprt | 108 KB |
| 217 | BHCS, .25-20 x .625in LG.SLDPRT | 237 KB |
| 218 | BHCS, .25-20 x .750in LG.SLDPRT | 235 KB |
| 219 | BHCS, 10-32 x .500in LG.SLDPRT | 265 KB |
| 220 | BHCS, 10-32 x .750in LG.SLDPRT | 226 KB |
| 221 | BHCS, 10-32 x 1.000in LG.SLDPRT | 212 KB |
| 222 | BHCS, 10-32 x 1.125in LG.SLDPRT | 199 KB |
| 223 | BHCS, 10-32 x 1.250in LG.SLDPRT | 218 KB |
| 224 | BHCS, 8-32 x .500in LG.SLDPRT | 238 KB |
| 225 | Ball Joint, .313-24 Internal Thread, .313-24 Stud.SLDPRT | 488 KB |
| 226 | Base Stage Bearing Plate.SLDPRT | 298 KB |
| 227 | Base Stage Horzontal Bearing Support.SLDPRT | 124 KB |
| 228 | Base Stage Motor Mounting Plate V2.SLDPRT | 505 KB |
| 229 | Battery Holder.SLDPRT | 410 KB |
| 230 | Battery Velcro Rear Frame Loop.SLDPRT | 127 KB |
| 231 | Battery.SLDPRT | 302 KB |
| 232 | Belt Attachment Plate.SLDPRT | 92.5 KB |
| 233 | Board.step.SLDASM | 58.1 KB |
| 234 | Brake Caliper.SLDPRT | 912 KB |
| 235 | Brake Disc.SLDPRT | 249 KB |
| 236 | Bumper Corner Mounting Rail Vertical Support.SLDPRT | 95.4 KB |
| 237 | Bumper Corner Mounting Rail.SLDPRT | 107 KB |
| 238 | Bumper Filler.SLDPRT | 447 KB |
| 239 | Bumper Mounting Bracket.SLDPRT | 127 KB |
| 240 | Bumpers, 8-Wheel Drive.SLDPRT | 136 KB |
| 241 | C1.step.SLDASM | 57.4 KB |
| 242 | C10.step.SLDASM | 56.7 KB |
| 243 | C11.step.SLDASM | 56.8 KB |
| 244 | C12.step.SLDASM | 56.9 KB |
| 245 | C13.step.SLDASM | 57 KB |
| 246 | C14.step.SLDASM | 57 KB |
| 247 | C15.step.SLDASM | 56.7 KB |
| 248 | C16.step.SLDASM | 56.5 KB |
| 249 | C17.step.SLDASM | 57.8 KB |
| 250 | C18.step.SLDASM | 56.7 KB |
| 251 | C19.step.SLDASM | 57.8 KB |
| 252 | C2.step.SLDASM | 56.9 KB |
| 253 | C20.step.SLDASM | 56.9 KB |
| 254 | C21.step.SLDASM | 57.5 KB |
| 255 | C22.step.SLDASM | 57.3 KB |
| 256 | C23.step.SLDASM | 57.8 KB |
| 257 | C24.step.SLDASM | 57.2 KB |
| 258 | C25.step.SLDASM | 57.2 KB |
| 259 | C26.step.SLDASM | 57 KB |
| 260 | C27.step.SLDASM | 57.1 KB |
| 261 | C28.step.SLDASM | 57.4 KB |
| 262 | C29.step.SLDASM | 56.7 KB |
| 263 | C3.step.SLDASM | 56.7 KB |
| 264 | C30.step.SLDASM | 56.2 KB |
| 265 | C31.step.SLDASM | 56.7 KB |
| 266 | C32.step.SLDASM | 57.8 KB |
| 267 | C34.step.SLDASM | 57.2 KB |
| 268 | C35.step.SLDASM | 56.6 KB |
| 269 | C36.step.SLDASM | 57.3 KB |
| 270 | C4.step.SLDASM | 57.2 KB |
| 271 | C5.step.SLDASM | 57 KB |
| 272 | C6.step.SLDASM | 57.2 KB |
| 273 | C7.step.SLDASM | 57.8 KB |
| 274 | C8.step.SLDASM | 58.1 KB |
| 275 | C9.step.SLDASM | 57.2 KB |
| 276 | CIM OUTPUT SHAFT.SLDPRT | 1.28 MB |
| 277 | Caliper Mounting Bracket.SLDPRT | 251 KB |
| 278 | Chain Guard, Front.SLDPRT | 224 KB |
| 279 | Chain Guard, Rear.SLDPRT | 206 KB |
| 280 | Chassis Assembly.SLDASM | 42.1 MB |
| 281 | Chassis Front and Rear Crossmember.SLDPRT | 404 KB |
| 282 | Chassis Riser.SLDPRT | 116 KB |
| 283 | Clamping_Shaft_Collar_-_3_8_Round_ID_217-2738.SLDPRT | 569 KB |
| 284 | Clippard AVT-PP-35.SLDPRT | 411 KB |
| 285 | Clippard AVT-PP-CL.SLDPRT | 101 KB |
| 286 | Compliant Wheel Shaft V2.SLDPRT | 132 KB |
| 287 | Cone.SLDPRT | 236 KB |
| 288 | Constant Force Spring Pulley V2.SLDPRT | 131 KB |
| 289 | Cube.SLDPRT | 188 KB |
| 290 | Cylinder Lower Pivot Mount.SLDPRT | 81 KB |
| 291 | Cylinder Pivot Shaft.SLDPRT | 728 KB |
| 292 | D1.step.SLDASM | 57.2 KB |
| 293 | Dowel Pin, .375 OD x 1.500 LG.SLDPRT | 111 KB |
| 294 | Drive Shaft.SLDPRT | 125 KB |
| 295 | E-Chain Guard, Lower.SLDPRT | 452 KB |
| 296 | E_Chain Assembly.SLDASM | 357 KB |
| 297 | E_Chain End Link, Female, 38mm WD x 15mm HT, 28mm Bend Radius, (MMC 4556T35).SLDPRT | 443 KB |
| 298 | E_Chain End Link, Male, 38mm WD x 15mm HT, 28mm Bend Radius, (MMC 4556T35).SLDPRT | 232 KB |
| 299 | E_Chain Link, 38mm WD x 15mm HT, 28mm Bend Radius (MMC 4409T25).SLDPRT | 250 KB |
| 300 | E_Chain Mounting Bracket, Fixed End.SLDPRT | 124 KB |
| 301 | E_Chain Mounting Bracket, Moving End V3.SLDPRT | 305 KB |
| 302 | E_Chain Puley Tension Bracket V2.SLDPRT | 177 KB |
| 303 | E_Chain Pulley.SLDPRT | 256 KB |
| 304 | Electronics Board Assembly.SLDASM | 35.4 MB |
| 305 | Electronics Board Cover.SLDPRT | 81.3 KB |
| 306 | Electronics Board Expansion Plate.SLDPRT | 321 KB |
| 307 | Electronics Board Panel.SLDPRT | 2.17 MB |
| 308 | Exterior Cover.SLDPRT | 721 KB |
| 309 | F-BHCS, 10-32 x .500in LG (REV-21-2056).SLDPRT | 112 KB |
| 310 | FH26-33S-0.3SHW___X2__7C217565__X0__.step.SLDPRT | 1.05 MB |
| 311 | FHCS, 10-32 x .375in LG.SLDPRT | 201 KB |
| 312 | FHCS, 10-32 x 1.375in LG.SLDPRT | 261 KB |
| 313 | FHCS, M3 x 10mm LG.SLDPRT | 185 KB |
| 314 | Falcon 500 Brushless Motor.SLDASM | 6.18 MB |
| 315 | Free-Models.step.SLDASM | 58.5 KB |
| 316 | Front Bumper Support Plate.SLDPRT | 113 KB |
| 317 | Gearbox Cover.SLDPRT | 174 KB |
| 318 | Gripper Assembly V2.SLDASM | 7.2 MB |
| 319 | Gripper Base V2.SLDPRT | 117 KB |
| 320 | Gripper Base, Polycarbonate.SLDPRT | 254 KB |
| 321 | Gripper Jaw Pivot.SLDPRT | 134 KB |
| 322 | Gripper Pivot Angle Limiter Plate.SLDPRT | 119 KB |
| 323 | Gripper Pivot Angle Restrictor Plate.SLDPRT | 110 KB |
| 324 | Gripper Pivot Bearing Plate.SLDPRT | 146 KB |
| 325 | Gripper Pivot Sensor Mount.SLDPRT | 124 KB |
| 326 | Gripper Pivot Support Plate.SLDPRT | 350 KB |
| 327 | Gripper Potentiometer Adapter.SLDPRT | 112 KB |
| 328 | Gripper Roller Plate V2.SLDPRT | 165 KB |
| 329 | Gripper Wrist Interface Plate V2.SLDPRT | 154 KB |
| 330 | HTD Belt Clamp Base.SLDPRT | 264 KB |
| 331 | HTD Belt Clamp Pressure Plate.SLDPRT | 186 KB |
| 332 | IFI_217-3141-BAG.SLDASM | 804 KB |
| 333 | IFI_217-3141-RS775.SLDASM | 1.36 MB |
| 334 | IFI_217-3351.SLDPRT | 84.6 KB |
| 335 | IFI_217-4347.SLDPRT | 198 KB |
| 336 | IFI_217-5046.SLDPRT | 8.26 MB |
| 337 | Idler Shaft, Chassis, 8-Wheel Drive.SLDPRT | 213 KB |
| 338 | Idler Shaft.SLDPRT | 130 KB |
| 339 | Inner Chain.SLDPRT | 65.1 KB |
| 340 | L1.step.SLDASM | 57.8 KB |
| 341 | L2.step.SLDASM | 56.9 KB |
| 342 | L3.step.SLDASM | 57.7 KB |
| 343 | L4.step.SLDASM | 56.7 KB |
| 344 | L5.step.SLDASM | 56.5 KB |
| 345 | L__X2__00F6__X0__tende.step.SLDPRT | 36.2 KB |
| 346 | Limit Switch (276-2174).SLDPRT | 756 KB |
| 347 | M2.5 SHCS, Grade 8 Steel Rev1_SSAM2.5-06MMZB.sldprt | 35.1 KB |
| 348 | M3 BHTS, Grade 8 Steel Rev1_SBTM3-50MMZB.sldprt | 42.5 KB |
| 349 | M3 BHTS-SECURE, Grade 8 Steel Rev1_SBTM3-24MMZB-SECURE.sldprt | 42.4 KB |
| 350 | M3 Nylock Nut.SLDPRT | 395 KB |
| 351 | Magnet Housing Clamp Plate.SLDPRT | 102 KB |
| 352 | Magnet Housing.SLDPRT | 146 KB |
| 353 | Magnet.SLDPRT | 86.8 KB |
| 354 | Main Breaker.SLDPRT | 370 KB |
| 355 | Main Chassis Rail.SLDPRT | 992 KB |
| 356 | Middle Stage Pulley.SLDPRT | 110 KB |
| 357 | Motor Spacer V2.SLDPRT | 253 KB |
| 358 | NUT-832-NYLOCK.sldprt | 32.4 KB |
| 359 | Neo 550 Cover.SLDPRT | 844 KB |
| 360 | Netgear GS308 8-Port Ethernet Switch.SLDPRT | 329 KB |
| 361 | OM5P-AC_Radio.SLDPRT | 1.01 MB |
| 362 | Open CASCADE STEP translator 6.8 1.1.1.step.SLDPRT | 225 KB |
| 363 | Outer Chain.SLDPRT | 64 KB |
| 364 | PILOT RING.SLDPRT | 83.4 KB |
| 365 | PINL-M020-006-S.sldprt | 27 KB |
| 366 | PRT_01_30_A180_1.SLDASM | 237 KB |
| 367 | Pivot Shaft.SLDPRT | 124 KB |
| 368 | Pivot Tensioner.SLDPRT | 117 KB |
| 369 | Pneumatic Cylinder Support Gusset.SLDPRT | 88.4 KB |
| 370 | Pneumatic Storage Tank Mount.SLDPRT | 205 KB |
| 371 | Potentiometer Drive Gear.SLDPRT | 587 KB |
| 372 | Potentiometer Driver Gear.SLDPRT | 504 KB |
| 373 | Prox Sensor Mount.SLDPRT | 182 KB |
| 374 | Pulley Guide Slot Plate Stiffener.SLDPRT | 67.3 KB |
| 375 | Pulley Guide Slot Plate V2.SLDPRT | 142 KB |
| 376 | R1.step.SLDASM | 57.4 KB |
| 377 | R10.step.SLDASM | 56.2 KB |
| 378 | R11.step.SLDASM | 56.6 KB |
| 379 | R12.step.SLDASM | 56.6 KB |
| 380 | R13.step.SLDASM | 57 KB |
| 381 | R15.step.SLDASM | 56.6 KB |
| 382 | R16.step.SLDASM | 56.7 KB |
| 383 | R17.step.SLDASM | 56.7 KB |
| 384 | R18.step.SLDASM | 56.7 KB |
| 385 | R19.step.SLDASM | 57 KB |
| 386 | R2.step.SLDASM | 57.5 KB |
| 387 | R22.step.SLDASM | 56.5 KB |
| 388 | R3.step.SLDASM | 56.2 KB |
| 389 | R4.step.SLDASM | 57.4 KB |
| 390 | R5.step.SLDASM | 57.5 KB |
| 391 | R6.step.SLDASM | 57 KB |
| 392 | R7.step.SLDASM | 57 KB |
| 393 | R8.step.SLDASM | 56.1 KB |
| 394 | REV-11-1850.SLDPRT | 30.3 MB |
| 395 | REV-11-1852.SLDPRT | 11.2 MB |
| 396 | REV-21-1650.SLDPRT | 3.17 MB |
| 397 | REV-21-1651.SLDPRT | 637 KB |
| 398 | Raspberry Pi 3.SLDPRT | 9.85 MB |
| 399 | RoboRIO V2.SLDPRT | 30.6 MB |
| 400 | RoboRio Adapter Plate.SLDPRT | 142 KB |
| 401 | Robot ISO.PNG | 234 KB |
| 402 | Robot Pickup Front.PNG | 238 KB |
| 403 | Robot Place Level 3 Front.PNG | 266 KB |
| 404 | Robot Signal Light.SLDPRT | 122 KB |
| 405 | SHCS, .25-20 x .500in LG.SLDPRT | 204 KB |
| 406 | SHCS, .25-20 x .750in LG.SLDPRT | 209 KB |
| 407 | SHCS, .25-20 x 1.000in LG.SLDPRT | 218 KB |
| 408 | SHCS, .25-20 x 1.250in LG.SLDPRT | 221 KB |
| 409 | SHCS, .25-20 x 1.750in LG.SLDPRT | 237 KB |
| 410 | SHCS, .25-20 x 2.000in LG.SLDPRT | 194 KB |
| 411 | SHCS, .313-18 x .750in LG.SLDPRT | 222 KB |
| 412 | SHCS, 10-32 x .500in LG.SLDPRT | 203 KB |
| 413 | SHCS, 10-32 x .625in LG.SLDPRT | 210 KB |
| 414 | SHCS, 10-32 x 1.000in LG.SLDPRT | 211 KB |
| 415 | SHCS, 10-32 x 2.000in LG.SLDPRT | 242 KB |
| 416 | SHCS, 10-32 x 2.750in LG.SLDPRT | 266 KB |
| 417 | SHCS, 4-40 x .250in LG.SLDPRT | 201 KB |
| 418 | SHCS, 4-40 x .500in LG.SLDPRT | 214 KB |
| 419 | SHCS, 6-32 x .375in LG.SLDPRT | 212 KB |
| 420 | SHCS, 6-32 x .500in LG.SLDPRT | 207 KB |
| 421 | SHCS, 8-32 x .500in LG.SLDPRT | 211 KB |
| 422 | SHCS, 8-32 x .625in LG.SLDPRT | 209 KB |
| 423 | SHCS, 8-32 x .750in LG.SLDPRT | 213 KB |
| 424 | SHCS, 8-32 x 1.500in LG.SLDPRT | 231 KB |
| 425 | SHCS, 8-32 x 1.750in LG.SLDPRT | 237 KB |
| 426 | SHCS, M3 x 10mm LG.SLDPRT | 213 KB |
| 427 | SHCS, M4 x 12mm LG.SLDPRT | 236 KB |
| 428 | SHCS, M4 x 25mm LG.SLDPRT | 239 KB |
| 429 | SMC_SS5Y3-41-06-N7T_6_Station_Base_Mount_217-2954.SLDASM | 373 KB |
| 430 | SMC_SY3140-6LZ_Single_Solenoid_Valve_217-3233.SLDASM | 171 KB |
| 431 | SSA_SSA0832-0500ZC.sldprt | 51 KB |
| 432 | SSA_SSA0832-0750ZC.sldprt | 28.8 KB |
| 433 | SSA_SSAM4-0010ZC.sldprt | 27.9 KB |
| 434 | SSS1032-0188-ZB.sldprt | 63.9 KB |
| 435 | Side Bumper Mounting Rail.SLDPRT | 168 KB |
| 436 | Signal Light Mounting Bracket.SLDPRT | 138 KB |
| 437 | Slew Ring Drive Adapter Extender.SLDPRT | 107 KB |
| 438 | Slew Ring Drive Adapter.SLDPRT | 125 KB |
| 439 | Slew Ring Mounting Bracket.SLDPRT | 149 KB |
| 440 | Slew Ring Strain Relief Bracket V2.SLDPRT | 171 KB |
| 441 | Spacer, Aluminum, #8 ID x .313 OD x .750 LG.SLDPRT | 108 KB |
| 442 | Spacer, Aluminum, .250 ID x .500 OD x .438 LG.SLDPRT | 199 KB |
| 443 | Spacer, Aluminum, .250 ID x .500 OD x .625 LG.SLDPRT | 108 KB |
| 444 | SparkMAX 6x Mount Base.SLDPRT | 491 KB |
| 445 | SparkMAX.SLDPRT | 1.68 MB |
| 446 | Stage 1 Bearing End Plate.SLDPRT | 106 KB |
| 447 | Stage 1 Bearing Spacer Plate.SLDPRT | 127 KB |
| 448 | Stage 1 Horizontal Bearing Support, Lower.SLDPRT | 130 KB |
| 449 | Stage 1 Horizontal Bearing Support, Upper.SLDPRT | 150 KB |
| 450 | Stage 1 Rope Pressure Plate.SLDPRT | 92.7 KB |
| 451 | Stage 1 Vertical Bearing Support, Lower.SLDPRT | 211 KB |
| 452 | Stage 1 Vertical Bearing Support, Upper.SLDPRT | 236 KB |
| 453 | Stage 2 Horizontal Bearing Support.SLDPRT | 137 KB |
| 454 | Stage 2 Vertical Bearing Support.SLDPRT | 156 KB |
| 455 | Taiss Adjustable M18 NPN NO Prox Switch 6-36V.SLDPRT | 1.27 MB |
| 456 | Telescopic Arm.SLDASM | 12.4 MB |
| 457 | Top Level Assembly.SLDASM | 59.2 MB |
| 458 | Two Bolt Flange Mount Bearing, .875in ID x 1.063in WD.SLDPRT | 735 KB |
| 459 | U1.step.SLDASM | 56.4 KB |
| 460 | U11.step.SLDASM | 57.3 KB |
| 461 | U12.step.SLDASM | 57.5 KB |
| 462 | U2.step.SLDASM | 57.1 KB |
| 463 | U3.step.SLDASM | 57.5 KB |
| 464 | U4.step.SLDASM | 57.3 KB |
| 465 | U5.step.SLDASM | 57.4 KB |
| 466 | U6.step.SLDASM | 58 KB |
| 467 | U7.step.SLDASM | 57.2 KB |
| 468 | UC-844_Rev.B.step.SLDASM | 80.9 KB |
| 469 | User_Library-FB_1608_Cut.step.SLDPRT | 60.4 KB |
| 470 | User_Library-FB_1608_Pad001.step.SLDPRT | 27.7 KB |
| 471 | VERSA PLANETARY GEARBOX V2.SLDASM | 3.03 MB |
| 472 | VRM.SLDPRT | 3.94 MB |
| 473 | VersaFrame_90_Degree_Gusset_217-3548.SLDPRT | 85.4 KB |
| 474 | VersaFrame_T_Gusset_217-3547.SLDPRT | 96.8 KB |
| 475 | VersaPlanetary CIM Adapter, 3D Printed.SLDPRT | 216 KB |
| 476 | Vex Limit Switch Mount.SLDPRT | 275 KB |
| 477 | Vex Rubber Damper.SLDPRT | 66.6 KB |
| 478 | WCP-0047 Rev1.sldprt | 3.66 MB |
| 479 | WCP-0049 Rev2 6INCH.SLDASM | 1.29 MB |
| 480 | WCP-0049-001 Rev1.sldprt | 531 KB |
| 481 | WCP-0049-002 Rev1.sldprt | 98.8 KB |
| 482 | WCP-0100 Rev2.sldprt | 78.3 KB |
| 483 | WCP_DS_-_WCD_Base_Kit_217-3424.SLDASM | 18 MB |
| 484 | WCP_Side_Bearing_Block_Kit_217-3436.SLDASM | 142 KB |
| 485 | Wire Guard.SLDPRT | 562 KB |
| 486 | _32t_Aluminum_Plate_Sprocket_25_Chain_1-1_8_Bearing_Bore_217-2690.SLDPRT | 473 KB |
| 487 | am-2005 Pneumatic_Compressor_VIAIR_00090.SLDPRT | 2.64 MB |
| 488 | am-2006 pressure_switch.SLDPRT | 117 KB |
| 489 | am-3945_Orange 3IN 500Hex Compliant Wheel.SLDPRT | 901 KB |
| 490 | am-4118 Blank Hub.SLDPRT | 148 KB |
| 491 | am-6959 Falcon 500 Long Shaft.sldasm | 59.3 KB |
| 492 | mcmaster_91255A192_91255A192.sldprt | 70.5 KB |
| 493 | Áã¼þ5.SLDPRT | 124 KB |
| 494 | 【 屿双网 www.ysh3d.com 】 更多【资料】【图档】.url | 177 B |
| 495 | 公众号免费下载.jpg | 79 KB |
免责申明:
本网站模型由用户自行上传，如权利人发现存在误传其作品情形，请及时与本站联系。
免费下载
此图纸可免费下载
图纸ID：559382
文件大小：399.44M
软件版本：SOLIDWORKS
图纸格式：sldprt,sldasm
参数/编辑：可修改，包括参数
上传时间：2024-03-08
图纸介绍：
发布者
屿双网小匠
作品: 13827
粉丝: 65
提示
×
下载该图档需要消耗0金币！
确认下载
客服
签到
分享
