微信扫码登录
作者其它图纸
查看更多
猜你喜欢
活动福利+发布图纸
登录注册
钢管车架（ID:559573）
| # | 文件名称 | 文件大小 |
|---|---|---|
| 1 | +必看说明+.txt | 2.22 KB |
| 2 | 180mm rotor.sldprt | 347 KB |
| 3 | 210mm rotor.SLDPRT | 211 KB |
| 4 | 210mm rotor.SLDPRT | 211 KB |
| 5 | 220mm x 4.5mm brake rotor.STEP | 1.08 MB |
| 6 | 220mm x 4.5mm brake rotor.STEP | 1.08 MB |
| 7 | 4108.jpg | 27.4 KB |
| 8 | 4108.jpg | 27.4 KB |
| 9 | 4444T101_STEEL BALL JOINT ROD END WITH GREASE FITTING.SLDPRT | 1 MB |
| 10 | 4444T101_STEEL BALL JOINT ROD END WITH GREASE FITTING.SLDPRT | 1.01 MB |
| 11 | 4444T301_STEEL BALL JOINT ROD END WITH GREASE FITTING.SLDPRT | 1.05 MB |
| 12 | 60645K920_STEEL BALL JOINT ROD END.SLDPRT | 756 KB |
| 13 | 63195K710_STEEL BALL JOINT SWIVEL BEARING.SLDPRT | 187 KB |
| 14 | 90213A109_INVERTED EXTERNAL RETAINING RING.SLDPRT | 97.9 KB |
| 15 | 95th percentile male seating.SLDPRT | 56.6 KB |
| 16 | Brake caliper-W-PS1.IGS | 1.94 MB |
| 17 | Brake caliper-W-PS1.IGS | 1.94 MB |
| 18 | Brake pad.IGS | 491 KB |
| 19 | Brake pad.IGS | 491 KB |
| 20 | Brake pin.IGS | 38.4 KB |
| 21 | Brake pin.IGS | 38.4 KB |
| 22 | CBR (new oil pan).SLDASM | 1.23 MB |
| 23 | CBR600F4I.SLDPRT | 2.28 MB |
| 24 | CBR600F4I.STEP | 2.53 MB |
| 25 | CV center diff side.SLDPRT | 266 KB |
| 26 | Caliper frame.IGS | 1.41 MB |
| 27 | Caliper frame.IGS | 1.41 MB |
| 28 | Chassis 3.05.19.SLDPRT | 3.34 MB |
| 29 | Chassis w. control arm mounts 4.27.19.SLDPRT | 2.94 MB |
| 30 | Chassis with upper control arm mounts.SLDPRT | 3.36 MB |
| 31 | Colored Assembley.SLDASM | 1.57 MB |
| 32 | Copy of Front Wheel Hub housing custom rotor.SLDPRT | 1.44 MB |
| 33 | Copy of Front Wheel Hub housing custom rotor.SLDPRT | 1.44 MB |
| 34 | Copy of Rotor Pin - RCV.STEP | 49.3 KB |
| 35 | Copy of Rotor Pin - RCV.STEP | 49.3 KB |
| 36 | Copy of Snap ring for hub - RCV.STEP | 56.8 KB |
| 37 | Copy of Snap ring for hub - RCV.STEP | 56.8 KB |
| 38 | Copy of Titanium Wheel studs - RCV.STEP | 842 KB |
| 39 | Copy of Titanium Wheel studs - RCV.STEP | 842 KB |
| 40 | DSD-100-100-00713 V3.stp | 30.2 MB |
| 41 | DUMMY.SLDASM | 268 KB |
| 42 | Drexler V3 Adjustable dif.SLDASM | 21 MB |
| 43 | Dry Sump Pan Assembly.SLDASM | 835 KB |
| 44 | Dry Sump Pan Inlet.SLDPRT | 403 KB |
| 45 | Dry Sump Pan test template.SLDPRT | 1.08 MB |
| 46 | Dry Sump Pan.SLDPRT | 1.38 MB |
| 47 | FSAE 4 pane view.jpg | 195 KB |
| 48 | FSAE MOMO Steering Wheel.SLDPRT | 1.22 MB |
| 49 | FSAE intake.png | 292 KB |
| 50 | Flat pattern - pullrod mounting bracket-front shock assembly x8.DWG | 267 KB |
| 51 | Flat pattern - pushrod mounting bracket.DXF | 24.7 KB |
| 52 | Front Control Arm - upper.SLDPRT | 171 KB |
| 53 | Front Control Arm.SLDASM | 240 KB |
| 54 | Front Control Arm.SLDPRT | 171 KB |
| 55 | Front Upright 3-14-19 - left.SLDPRT | 448 KB |
| 56 | Front Upright 3-14-19.SLDPRT | 382 KB |
| 57 | Front Upright 4-25-19.SLDPRT | 393 KB |
| 58 | Front Wheel Hub housing - RCV.STEP | 1.87 MB |
| 59 | Front Wheel Hub housing - RCV.STEP | 1.87 MB |
| 60 | Front Wheel Hub housing custom rotor.SLDPRT | 1.44 MB |
| 61 | Front Wheel Hub housing custom rotor.SLDPRT | 1.44 MB |
| 62 | Front Wheel hub bearing - RCV.STEP | 316 KB |
| 63 | Front Wheel hub bearing - RCV.STEP | 316 KB |
| 64 | Front Wheel hub housing nut - RCV.STEP | 1.45 MB |
| 65 | Front Wheel hub housing nut - RCV.STEP | 1.45 MB |
| 66 | HAB-6T-AuroraBearingCo.-03-07-2019.stp | 85 KB |
| 67 | Head.SLDPRT | 110 KB |
| 68 | Hoosier 43168.SLDPRT | 143 KB |
| 69 | Hoosier 43168.SLDPRT | 143 KB |
| 70 | Hoosier 43168.SLDPRT | 143 KB |
| 71 | IMG_1937.PNG | 144 KB |
| 72 | IMG_1939.PNG | 160 KB |
| 73 | Inner CV assembly - left.SLDASM | 610 KB |
| 74 | Inner CV assembly - right.SLDASM | 612 KB |
| 75 | Inner CV assembly.SLDASM | 402 KB |
| 76 | LF wheel assembly 4-19-19.SLDASM | 2.51 MB |
| 77 | LHRearCarmV6.SLDPRT | 312 KB |
| 78 | LL713049-LL713010-TheTimkenCompany-12-07-2018.stp | 299 KB |
| 79 | Left Caliper Mount.STEP | 159 KB |
| 80 | Left Caliper Mount.STEP | 159 KB |
| 81 | Left Caliper Mount.sldprt | 158 KB |
| 82 | Left Caliper Mount.sldprt | 332 KB |
| 83 | Left Caliper Mount.sldprt | 332 KB |
| 84 | Left Front Upright - modified.SLDPRT | 313 KB |
| 85 | Left Front Upright.SLDASM | 319 KB |
| 86 | Left Front Upright.SLDASM | 319 KB |
| 87 | Left Front Upright.SLDPRT | 769 KB |
| 88 | Left Front Upright.SLDPRT | 769 KB |
| 89 | Left Front Upright.STEP | 415 KB |
| 90 | Left Front Upright.STEP | 415 KB |
| 91 | Left Tie Rod Mount.SLDPRT | 91.2 KB |
| 92 | Left Tie Rod Mount.SLDPRT | 91.2 KB |
| 93 | Left Tie Rod Mount.STEP | 55.9 KB |
| 94 | Left Tie Rod Mount.STEP | 55.9 KB |
| 95 | Left Tie Rod Mount.sldprt | 245 KB |
| 96 | Left Tie Rod Mount.sldprt | 245 KB |
| 97 | Left diff bearing support (center) 4.29.19.SLDPRT | 149 KB |
| 98 | Left diff bearing support (center).SLDPRT | 146 KB |
| 99 | Lower arm.SLDPRT | 67.3 KB |
| 100 | Lower leg.SLDPRT | 60.4 KB |
| 101 | Model.SLDPRT | 3.29 MB |
| 102 | NOTES!.docx | 6.28 KB |
| 103 | NOTES!.docx | 6.28 KB |
| 104 | Outer CV diff side.SLDPRT | 341 KB |
| 105 | PS-1-cm-lg.jpg | 77.5 KB |
| 106 | PS-1-cm-lg.jpg | 77.5 KB |
| 107 | PS-1-lg.jpg | 204 KB |
| 108 | PS-1-lg.jpg | 204 KB |
| 109 | Part3.sldprt | 20.4 KB |
| 110 | Part3.sldprt | 26 KB |
| 111 | PerformanceLog.txt | 1.35 KB |
| 112 | PerformanceLog.txt | 1.61 KB |
| 113 | RCV D4630 - drexler diff short tripod housing.SLDPRT | 806 KB |
| 114 | RCV D4825 - drexler diff long tripod housing.SLDPRT | 782 KB |
| 115 | README - really though.._.docx | 682 KB |
| 116 | RF wheel assembly 11-29-18.SLDASM | 2.14 MB |
| 117 | RF wheel assembly 11-29-18.SLDASM | 2.61 MB |
| 118 | RHRearCarmV6.SLDPRT | 380 KB |
| 119 | Rear Wheel Hub Bearing - RCV.STEP | 380 KB |
| 120 | Rear Wheel Hub Housing - RCV.STEP | 3.37 MB |
| 121 | Rear Wheel hub housing nut - RCV.STEP | 465 KB |
| 122 | Rear upright 4.8.2019 (1).SLDPRT | 217 KB |
| 123 | RearUpright 1.10.19.SLDPRT | 186 KB |
| 124 | RearUprightPrototype.SLDPRT | 271 KB |
| 125 | Render.JPG | 256 KB |
| 126 | Render.JPG | 256 KB |
| 127 | Right Front Upright cutout.SLDPRT | 527 KB |
| 128 | Rotor Pin - RCV.STEP | 49.3 KB |
| 129 | Shoulders.SLDPRT | 80.7 KB |
| 130 | Snap ring for hub - RCV.STEP | 56.8 KB |
| 131 | Steering Rack 2-7-19.SLDASM | 1.04 MB |
| 132 | Steering Rack Base 2-7-19.SLDPRT | 229 KB |
| 133 | Steering Rack Rod 2-7-19.SLDPRT | 75.7 KB |
| 134 | Subframe 04.26.19.SLDPRT | 599 KB |
| 135 | TILTON 72-603 WITH 76 MASTER CYLINDERS.stp | 3.4 MB |
| 136 | Tilton 72-603 pedal assembly.SLDASM | 3.26 MB |
| 137 | Timken 3MMV9110HX bearing.SLDPRT | 1.08 MB |
| 138 | Timken 3MMV9111HX bearing.SLDPRT | 616 KB |
| 139 | Titanium Wheel studs - RCV.STEP | 842 KB |
| 140 | Upper arm.SLDPRT | 68.4 KB |
| 141 | Upper leg.SLDPRT | 67.2 KB |
| 142 | Wheel 11-28-18.SLDPRT | 493 KB |
| 143 | Wheel 11-28-18.SLDPRT | 493 KB |
| 144 | Wheel 11-28-18.SLDPRT | 495 KB |
| 145 | X.BAT | 1.01 KB |
| 146 | assembly with rear frame.SLDASM | 24.3 MB |
| 147 | attenuator.SLDPRT | 124 KB |
| 148 | axle shaft.SLDPRT | 353 KB |
| 149 | ball.SLDPRT | 139 KB |
| 150 | bearing cage diff side.SLDPRT | 266 KB |
| 151 | bearing cage wheel side.SLDPRT | 324 KB |
| 152 | bell crank.SLDPRT | 135 KB |
| 153 | bellcrank adjuster.SLDPRT | 81.9 KB |
| 154 | bellcrank adjuster.SLDPRT | 81.9 KB |
| 155 | big bearing bracket.SLDPRT | 140 KB |
| 156 | big cap.SLDPRT | 133 KB |
| 157 | body.SLDPRT | 128 KB |
| 158 | brake-pad-iges.IGS | 276 KB |
| 159 | brake-pad-iges.IGS | 276 KB |
| 160 | brake-pad-step.STEP | 149 KB |
| 161 | brake-pad-step.STEP | 149 KB |
| 162 | car full rendering.JPG | 382 KB |
| 163 | chassis bubble drawing.PNG | 212 KB |
| 164 | control arm joints - right side.SLDASM | 89.7 KB |
| 165 | control arm joints.SLDASM | 934 KB |
| 166 | control arm mount - right side.SLDPRT | 154 KB |
| 167 | control arm mount.SLDPRT | 113 KB |
| 168 | control arm mounting tab 4.18.19.SLDPRT | 102 KB |
| 169 | control arm mounting tab 4.18.19.SLDPRT | 106 KB |
| 170 | control arm mounting tab 4.23.19.SLDPRT | 108 KB |
| 171 | diff back dovetail piece.SLDPRT | 73.9 KB |
| 172 | diff carrier 12-7-18.SLDPRT | 301 KB |
| 173 | diff carrier back 12-7-18.SLDPRT | 336 KB |
| 174 | diff-carrier-cv 12-7-2018.SLDASM | 23 MB |
| 175 | differential adapter - left.SLDPRT | 1.07 MB |
| 176 | differential adapter - right.SLDPRT | 1.06 MB |
| 177 | dimensions from CATIA.2.PNG | 85.8 KB |
| 178 | dimensions from CATIA.3.PNG | 173 KB |
| 179 | dimensions from CATIA.4.PNG | 240 KB |
| 180 | dimensions from CATIA.PNG | 84.2 KB |
| 181 | front control arm ball joint(s).SLDASM | 942 KB |
| 182 | front control arm spacer.sldprt | 25.2 KB |
| 183 | front hub 4.29.19.SLDPRT | 1.02 MB |
| 184 | front hub nut.SLDPRT | 880 KB |
| 185 | front hub nut.SLDPRT | 880 KB |
| 186 | front hub nut.SLDPRT | 880 KB |
| 187 | front hub nut.SLDPRT | 880 KB |
| 188 | front hub.SLDPRT | 1.23 MB |
| 189 | front hub.SLDPRT | 1.23 MB |
| 190 | front hub.SLDPRT | 1020 KB |
| 191 | front inner bearing race.sldprt | 41.5 KB |
| 192 | front inner bearing race.sldprt | 41.5 KB |
| 193 | front needle bearings.sldprt | 78.5 KB |
| 194 | front needle bearings.sldprt | 78.5 KB |
| 195 | front outer bearing race.sldprt | 40.5 KB |
| 196 | front outer bearing race.sldprt | 40.5 KB |
| 197 | front pushrod assembly.SLDASM | 873 KB |
| 198 | front shock assem.SLDASM | 216 KB |
| 199 | front upper control arm assem (42019).SLDASM | 110 KB |
| 200 | front upright.SLDPRT | 1.16 MB |
| 201 | front upright.SLDPRT | 1.16 MB |
| 202 | intake 3 pane.jpg | 175 KB |
| 203 | intake 6.9.19.SLDPRT | 1.39 MB |
| 204 | intake pressures.png | 57.3 KB |
| 205 | lower left control arm.SLDASM | 1.65 MB |
| 206 | lower left control arm.SLDPRT | 104 KB |
| 207 | lower right control arm - 1.10.19.SLDASM | 1.05 MB |
| 208 | lower right control arm 42319.SLDPRT | 124 KB |
| 209 | lower right control arm.SLDPRT | 155 KB |
| 210 | measurements12.26.18.ods | 16 KB |
| 211 | modified engine wiring diagram.jpg | 3.45 MB |
| 212 | outer control arm spacer.SLDPRT | 52.2 KB |
| 213 | outer cv cup 11.20.18.SLDPRT | 542 KB |
| 214 | outer spherical bearing ball.SLDPRT | 91.9 KB |
| 215 | pedal bracket.SLDPRT | 155 KB |
| 216 | pedal mounting plate.SLDPRT | 292 KB |
| 217 | pullrod bellcrank 4.29.19.SLDPRT | 216 KB |
| 218 | pullrod bellcrank-Topology Study 1-BenchMark.txt | 6.82 KB |
| 219 | pullrod bellcrank-Topology Study 1-GD.Par | 3.04 KB |
| 220 | pullrod bellcrank-Topology Study 1.CWR | 63.8 MB |
| 221 | pullrod bellcrank-Topology Study 1.LOG | 89 B |
| 222 | pullrod bellcrank.SLDPRT | 243 KB |
| 223 | pullrod mounting bracket.SLDPRT | 141 KB |
| 224 | push rod.SLDPRT | 154 KB |
| 225 | pushrod bellcrank.SLDPRT | 134 KB |
| 226 | pushrod bellcrank.SLDPRT | 165 KB |
| 227 | pushrod end 1.5.19.SLDPRT | 171 KB |
| 228 | pushrod mounting bracket.SLDPRT | 134 KB |
| 229 | pushrod-CA bracket (lower).SLDPRT | 206 KB |
| 230 | pushrod-CA bracket.SLDPRT | 212 KB |
| 231 | rear control arm.SLDASM | 1.08 MB |
| 232 | rear control arm.SLDPRT | 209 KB |
| 233 | rear frame.sldprt | 153 KB |
| 234 | rear hub - w bearings.SLDASM | 1.25 MB |
| 235 | rear hub 1.4.19.SLDPRT | 1.39 MB |
| 236 | rear hub 4.18.19 (1).SLDPRT | 1.55 MB |
| 237 | rear hub aluminum section.SLDPRT | 2.62 MB |
| 238 | rear hub nut - RCV.SLDPRT | 775 KB |
| 239 | rear hub steel section.SLDPRT | 2.75 MB |
| 240 | rear hub.SLDASM | 1.33 MB |
| 241 | rear shock assem.SLDASM | 190 KB |
| 242 | right diff bearing support (bottom cap).SLDPRT | 64.5 KB |
| 243 | right diff bearing support (center) 4.29.19.SLDPRT | 160 KB |
| 244 | right diff bearing support (top cap)4.29.19.SLDPRT | 118 KB |
| 245 | right diff bearing support.SLDASM | 98.9 KB |
| 246 | small cap.SLDPRT | 140 KB |
| 247 | spherical bearing ball(.63indiam).SLDPRT | 123 KB |
| 248 | spherical bearing ball.SLDPRT | 107 KB |
| 249 | spherical bearing for pushrod.SLDPRT | 105 KB |
| 250 | spherical bearing spacer.SLDPRT | 63.9 KB |
| 251 | spherical bearing.SLDASM | 932 KB |
| 252 | steering adapter.SLDPRT | 71.5 KB |
| 253 | steering assembly.SLDASM | 1.53 MB |
| 254 | steering rack extension 2-7-19.SLDPRT | 115 KB |
| 255 | stress testing - chassis.png | 212 KB |
| 256 | tulip differential side.CATPart | 102 KB |
| 257 | upper left control arm.SLDASM | 1.03 MB |
| 258 | upper left control arm.SLDPRT | 102 KB |
| 259 | upper right control arm - 1.10.19.SLDASM | 1.06 MB |
| 260 | upper right control arm 42019.SLDPRT | 118 KB |
| 261 | upper right control arm.SLDPRT | 153 KB |
| 262 | whole car assembly 12.24.18.SLDASM | 24 MB |
| 263 | whole car assembly 4.18.19.SLDASM | 33.6 MB |
| 264 | whole car assembly.SLDASM | 33.6 MB |
| 265 | wilwood.jpg | 11.9 KB |
| 266 | wilwood.jpg | 11.9 KB |
| 267 | ~$Dry Sump Pan test template.SLDPRT | 6 B |
| 268 | 【 屿双网 www.ysh3d.com 】 更多【资料】【图档】.url | 177 B |
| 269 | 公众号免费下载.jpg | 79 KB |
免责申明:
本网站模型由用户自行上传，如权利人发现存在误传其作品情形，请及时与本站联系。
免费下载
此图纸可免费下载
图纸ID：559573
文件大小：299.13M
软件版本：SOLIDWORKS,CATIA,STEP,IGES,AUTOCAD,SOLIDEDGE
图纸格式：sldprt,step,igs,sldasm,dwg
参数/编辑：可修改，包括参数
上传时间：2024-03-09
图纸介绍：
发布者
屿双网小匠
作品: 13827
粉丝: 65
![二位二通活塞式多介质角座阀系列[25]](https://yushuangwang2.oss-accelerate.aliyuncs.com/fileimg/m677faee9a42cc/01_home.jpg)
提示
×
下载该图档需要消耗0金币！
确认下载
客服
签到
分享
