微信扫码登录
作者其它图纸
查看更多
猜你喜欢
活动福利+发布图纸
登录注册
提升机（ID:574381）
| # | 文件名称 | 文件大小 |
|---|---|---|
| 1 | 125mm.SLDPRT | 105 KB |
| 2 | 16aX1100槽钢-1.SLDPRT | 84.6 KB |
| 3 | 16aX1100槽钢.SLDPRT | 78.1 KB |
| 4 | 1718704641317192.zip | 20.7 MB |
| 5 | 6022.SLDPRT | 659 KB |
| 6 | AS DRAT HOOPER.STEP-1.SLDPRT | 35.3 KB |
| 7 | AS DRAT.STEP-1.SLDPRT | 35.3 KB |
| 8 | AS PULLEY ATAS.STEP-1.SLDPRT | 40.9 KB |
| 9 | AS PULLEY BAWAH.STEP-1.SLDPRT | 40.2 KB |
| 10 | BEARING PILLOW BLOCK UC206.STEP-1.SLDPRT | 144 KB |
| 11 | BEARING TAKE UP.STEP-1.SLDPRT | 153 KB |
| 12 | BELT MOTOR PENGGERAK B-62.STEP.sldprt | 36.2 KB |
| 13 | BESI BEHEL PEMBAGI OUTER.STEP-2.SLDPRT | 36 KB |
| 14 | BESI NAKO 160 mm.STEP-1.SLDPRT | 37 KB |
| 15 | BESI SIKU 170 mm_Default_As Machined_.STEP-1.SLDPRT | 39.6 KB |
| 16 | BESI SIKU 330 mm_Default_As Machined_.STEP-1.SLDPRT | 38.9 KB |
| 17 | BESI SIKU 470 x 250 mm_Default_As Machined_.STEP-1.SLDPRT | 59.4 KB |
| 18 | BESI SIKU 740 x 250 mm_Default_As Machined_.STEP-1.SLDPRT | 58.2 KB |
| 19 | BESI SIKU 760 mm KANAN_Default_As Machined_.STEP-1.SLDPRT | 39.8 KB |
| 20 | BESI SIKU 760 mm KIRI_Default_As Machined_.STEP-1.SLDPRT | 39.2 KB |
| 21 | BESI SIKU CASING V_Default_As Machined_.STEP-1.SLDPRT | 57 KB |
| 22 | BESI SIKU DRAT AS (ATAS)_Default_As Machined_.STEP-1.SLDPRT | 54.6 KB |
| 23 | BESI SIKU DRAT HOOPER_Default_As Machined_.STEP-1.SLDPRT | 39.8 KB |
| 24 | BUCKET.STEP.sldprt | 74.3 KB |
| 25 | CASING ATAS.STEP-1.SLDPRT | 37.5 KB |
| 26 | COVER BAWAH BUCKET.STEP-1.SLDPRT | 41.4 KB |
| 27 | COVER CASING ATAS.STEP-1.SLDPRT | 94.8 KB |
| 28 | COVER HOOPER.STEP-1.SLDPRT | 39.9 KB |
| 29 | COVER INSPEKSI ATAS.STEP-1.SLDPRT | 40.3 KB |
| 30 | COVER INSPEKSI.STEP-1.SLDPRT | 53.1 KB |
| 31 | HOOPER BELAKANG.STEP-1.SLDPRT | 41.2 KB |
| 32 | HOOPER DEPAN.STEP-1.SLDPRT | 40.2 KB |
| 33 | HOOPER SAMPING KANAN.STEP-1.SLDPRT | 40.9 KB |
| 34 | HOOPER SAMPING KIRI.STEP-1.SLDPRT | 40.4 KB |
| 35 | MOTOR AC.STEP.sldprt | 1.11 MB |
| 36 | NJ203E.SLDPRT | 210 KB |
| 37 | NJ205E.SLDPRT | 237 KB |
| 38 | NJ206E.SLDPRT | 236 KB |
| 39 | NJ209E.SLDPRT | 246 KB |
| 40 | PENGUNCI PULLEY.STEP-1.SLDPRT | 38.1 KB |
| 41 | PENUTUP PULLEY.STEP-1.SLDPRT | 35.2 KB |
| 42 | PENYANGGA MOTOR II_Default_As Machined_.STEP-1.SLDPRT | 38.9 KB |
| 43 | PENYANGGA MOTOR_Default_As Machined_.STEP-1.SLDPRT | 55.3 KB |
| 44 | PENYANGGA PILLOW BLOCK KANAN_Default_As Machined_.STEP-1.SLDPRT | 43.4 KB |
| 45 | PENYANGGA PILLOW BLOCK KIRI_Default_As Machined_.STEP-1.SLDPRT | 42.8 KB |
| 46 | PIPA OUTER.STEP-2.SLDPRT | 68.3 KB |
| 47 | PLAT ALAS MOTOR.STEP-1.SLDPRT | 36.4 KB |
| 48 | PLAT BEARING TU.STEP-1.SLDPRT | 36.6 KB |
| 49 | PLAT CASING BAWAH.STEP-1.SLDPRT | 45.4 KB |
| 50 | PLAT CASING TENGAH I.STEP-1.SLDPRT | 41.2 KB |
| 51 | PLAT CASING TENGAH V.STEP-1.SLDPRT | 40.5 KB |
| 52 | PLAT COVER BAWAH.STEP-1.SLDPRT | 41.9 KB |
| 53 | PLAT COVER TENGAH I.STEP-1.SLDPRT | 42.3 KB |
| 54 | PLAT COVER TENGAH V.STEP-1.SLDPRT | 40.6 KB |
| 55 | PLAT OUTER BAWAH.STEP-2.SLDPRT | 37.2 KB |
| 56 | PLAT OUTER DEPAN.STEP-2.SLDPRT | 42.9 KB |
| 57 | PLAT OUTER SAMPING.STEP-2.SLDPRT | 46.7 KB |
| 58 | PLAT PEMBAGI OUTER BUCKET.STEP-2.SLDPRT | 37.1 KB |
| 59 | PLAT PENGARAH OUTER BUCKET ELEVATOR.STEP-2.SLDPRT | 37.1 KB |
| 60 | PLAT ROLL OUTER I.STEP-2.SLDPRT | 36.5 KB |
| 61 | PLAT ROLL OUTER II.STEP-2.SLDPRT | 36.3 KB |
| 62 | PLAT STRIP CASING V.STEP-1.SLDPRT | 36.6 KB |
| 63 | PLAT TEKUK 500 mm.STEP-1.SLDPRT | 38.4 KB |
| 64 | PLAT TEKUK 600 mm.STEP-1.SLDPRT | 38.5 KB |
| 65 | PULLEY DINAMO BUCKET ELEVATOR.STEP.sldprt | 31.2 KB |
| 66 | PULLEY PENGGERAK BUCKET ELEVATOR.STEP.sldprt | 43.5 KB |
| 67 | PULLEY.STEP-1.SLDPRT | 35.8 KB |
| 68 | REL COVER HOOPER.STEP-1.SLDPRT | 39.1 KB |
| 69 | REL COVER INSPEKSI ATAS.STEP-1.SLDPRT | 39 KB |
| 70 | REL COVER INSPEKSI.STEP-1.SLDPRT | 38.7 KB |
| 71 | REL PILLOW BLOCK KANAN-1.STEP-1.SLDASM | 37.5 KB |
| 72 | REL PILLOW BLOCK KANAN.STEP-1.SLDASM | 37.1 KB |
| 73 | REL PILLOW BLOCK KIRI-1.STEP-1.SLDASM | 36.4 KB |
| 74 | REL PILLOW BLOCK KIRI.STEP-1.SLDASM | 36.8 KB |
| 75 | SNK209轴承座.SLDPRT | 602 KB |
| 76 | SUB ASSY BEARING BAWAH-1.STEP-1.SLDASM | 36.8 KB |
| 77 | SUB ASSY BEARING BAWAH.STEP-1.SLDASM | 37.9 KB |
| 78 | SUB ASSY BEARING TAKE UP-1.STEP-1.SLDASM | 36.4 KB |
| 79 | SUB ASSY BEARING TAKE UP.STEP-1.SLDASM | 37 KB |
| 80 | SUB ASSY CASING ATAS.STEP-1.SLDASM | 41.9 KB |
| 81 | SUB ASSY CASING BAWAH.STEP-1.SLDASM | 46.4 KB |
| 82 | SUB ASSY CASING TENGAH I.STEP-1.SLDASM | 38.5 KB |
| 83 | SUB ASSY CASING TENGAH V.STEP-1.SLDASM | 40.3 KB |
| 84 | SUB ASSY HOOPER.STEP-1.SLDASM | 42.7 KB |
| 85 | SUB ASSY OUTER BUCKET ELEVATOR.STEP-2.SLDASM | 41.9 KB |
| 86 | SUB ASSY PULLEY ATAS.STEP-1.SLDASM | 37 KB |
| 87 | SUB ASSY PULLEY BAWAH.STEP-1.SLDASM | 37.5 KB |
| 88 | U型槽钢-1.SLDPRT | 85.8 KB |
| 89 | U型槽钢-2.SLDPRT | 88.1 KB |
| 90 | U型槽钢-3.SLDPRT | 86.7 KB |
| 91 | U型槽钢.SLDPRT | 85 KB |
| 92 | hex flange nut gradea_iso_Hexagon Flange Nut ISO - 4161 - M16 - N.STEP-1.SLDPRT | 59.8 KB |
| 93 | plain washer chamfered grade a_iso_Washer ISO 7090 - 6.STEP-2.SLDPRT | 35.6 KB |
| 94 | threaded elbow--45deg_CLASS 2000 THREADED ELBOW, 4.00 IN .STEP-2.SLDPRT | 56.6 KB |
| 95 | 主动轴.SLDPRT | 102 KB |
| 96 | 主动轴部装.SLDASM | 247 KB |
| 97 | 内板-1.SLDPRT | 126 KB |
| 98 | 出流口装配.SLDASM | 150 KB |
| 99 | 分流板.SLDPRT | 73.1 KB |
| 100 | 加强筋.SLDPRT | 103 KB |
| 101 | 加紧杆.SLDPRT | 102 KB |
| 102 | 四边形边1-0.SLDPRT | 81.1 KB |
| 103 | 四边形边1-1.SLDPRT | 121 KB |
| 104 | 四边形边1-2.SLDPRT | 167 KB |
| 105 | 四边形边1.SLDPRT | 81.5 KB |
| 106 | 复件 装配体74^喂料提升.SLDASM | 36.3 KB |
| 107 | 大米分级下料装置4.19.SLDASM | 3.4 MB |
| 108 | 宽竖梁-2.SLDPRT | 122 KB |
| 109 | 宽竖梁.SLDPRT | 138 KB |
| 110 | 平带.SLDPRT | 134 KB |
| 111 | 底座装配.SLDASM | 388 KB |
| 112 | 弯管长管.SLDPRT | 72.1 KB |
| 113 | 弹簧拉钩.SLDPRT | 122 KB |
| 114 | 弹簧拉钩调节.SLDPRT | 113 KB |
| 115 | 弹簧钩座.SLDPRT | 96.2 KB |
| 116 | 拉杆端副.SLDPRT | 116 KB |
| 117 | 拦边.SLDPRT | 90.5 KB |
| 118 | 接板.SLDPRT | 51.8 KB |
| 119 | 曲柄.SLDPRT | 102 KB |
| 120 | 曲柄套.SLDPRT | 127 KB |
| 121 | 板.SLDPRT | 57.4 KB |
| 122 | 横梁-2.SLDPRT | 74.1 KB |
| 123 | 横梁-3.SLDPRT | 67.3 KB |
| 124 | 横梁-4.SLDPRT | 97.6 KB |
| 125 | 横梁-5.SLDPRT | 95.1 KB |
| 126 | 横梁-6.SLDPRT | 77.4 KB |
| 127 | 横梁.SLDPRT | 73.6 KB |
| 128 | 流口.SLDPRT | 291 KB |
| 129 | 热轧槽钢 GB_T707-1988_10X771.sldprt | 67.7 KB |
| 130 | 热轧槽钢 GB_T707-1988_12X771.sldprt | 67.3 KB |
| 131 | 热轧槽钢 GB_T707-1988_8X771.sldprt | 67.3 KB |
| 132 | 电机.SLDPRT | 180 KB |
| 133 | 电机座底板.SLDPRT | 54.5 KB |
| 134 | 皮带轮.SLDPRT | 115 KB |
| 135 | 竖梁-1.SLDPRT | 146 KB |
| 136 | 竖梁.SLDPRT | 122 KB |
| 137 | 筛体.SLDPRT | 67.4 KB |
| 138 | 筛体架座.SLDASM | 349 KB |
| 139 | 筛体架装配.SLDASM | 184 KB |
| 140 | 筛体装配.SLDASM | 84.3 KB |
| 141 | 背板.SLDPRT | 53 KB |
| 142 | 螺母-1.SLDPRT | 105 KB |
| 143 | 螺母自制.SLDPRT | 89.6 KB |
| 144 | 衬套.SLDPRT | 68.7 KB |
| 145 | 角铁1（正对玻璃面）.SLDPRT | 83.6 KB |
| 146 | 角铁2.SLDPRT | 74.3 KB |
| 147 | 角铁3.SLDPRT | 75.1 KB |
| 148 | 角铁4.SLDPRT | 69.1 KB |
| 149 | 角铁5.SLDPRT | 79.9 KB |
| 150 | 调节曲柄轴.SLDASM | 108 KB |
| 151 | 调节杆.SLDASM | 60.6 KB |
| 152 | 调节盘.SLDPRT | 243 KB |
| 153 | 转轴-1.SLDPRT | 99.3 KB |
| 154 | 转轴-2.SLDPRT | 74 KB |
| 155 | 转轴右.SLDPRT | 109 KB |
| 156 | 转轴左.SLDPRT | 103 KB |
| 157 | 轴座-32.SLDPRT | 94.4 KB |
| 158 | 轴座.SLDPRT | 94 KB |
| 159 | 轴承座.SLDPRT | 128 KB |
| 160 | 轴承端盖-1.SLDPRT | 83 KB |
| 161 | 轴承端盖-2.SLDPRT | 96 KB |
| 162 | 轴承端盖-3.SLDPRT | 94.7 KB |
| 163 | 轴承端盖-4.SLDPRT | 106 KB |
| 164 | 轴承端盖.SLDPRT | 91.4 KB |
| 165 | 进口拦边.SLDPRT | 90.7 KB |
| 166 | 连接-1.SLDPRT | 85.6 KB |
| 167 | 连杆-1-1.SLDPRT | 107 KB |
| 168 | 连杆-1.SLDPRT | 107 KB |
| 169 | 连杆-5.SLDPRT | 185 KB |
| 170 | 连杆-6.SLDPRT | 179 KB |
| 171 | 连杆装配-1.SLDASM | 343 KB |
| 172 | 连杆装配.SLDASM | 343 KB |
| 173 | 连杆轴.SLDPRT | 120 KB |
| 174 | 连杆部装.SLDASM | 632 KB |
| 175 | 连板-1.SLDPRT | 56.2 KB |
| 176 | 连板.SLDPRT | 56.1 KB |
| 177 | 透视板.SLDPRT | 58.7 KB |
| 178 | 钣金1 - 副本.SLDPRT | 93.3 KB |
| 179 | 钣金1.SLDPRT | 104 KB |
| 180 | 钣金2.SLDPRT | 93.7 KB |
| 181 | 钣金装配体1.SLDASM | 82.4 KB |
| 182 | 钣金装配体2.SLDASM | 73.1 KB |
| 183 | 长轴-1.SLDPRT | 85.7 KB |
| 184 | 长轴-2.SLDPRT | 94.7 KB |
| 185 | 长轴-3.SLDPRT | 93.8 KB |
| 186 | 长轴.SLDPRT | 96.7 KB |
| 187 | 长连杆部装-2.SLDASM | 130 KB |
| 188 | 长连杆部装.SLDASM | 106 KB |
| 189 | 门板.SLDPRT | 52.3 KB |
| 190 | 门栓.SLDPRT | 110 KB |
| 191 | 门轴.SLDPRT | 72.7 KB |
| 192 | 飞轮.SLDPRT | 86.9 KB |
免责申明:
本网站模型由用户自行上传，如权利人发现存在误传其作品情形，请及时与本站联系。
立即下载
此图纸下载需要400金币
图纸ID：574381
文件大小：21.24M
软件版本：SOLIDWORKS 2020
图纸格式：sldprt,sldasm
参数/编辑：可修改，包括参数
上传时间：2024-06-18
图纸介绍：
发布者
攻城狮Joker
作品: 1126
粉丝: 11
提示
×
下载该图档需要消耗400金币！
确认下载
客服
签到
分享
