22加工夹具设备UG设计_UG_模型图纸下载

首页

图库

课设毕设

资料库

工程师

22加工夹具设备UG设计（ID:574561）

设备部件 / 工器具 / 22加工夹具设备UG设计

135

平面图

3D视图

文件列表

屿双网

#	文件名称	文件大小
1	52e3462fcbe8a.jpg	41.7 KB
2	52e34630d75cc.jpg	65.9 KB
3	APKT1003_Basic_1_id242_x_t.prt	215 KB
4	BCN45BL1000_id334_x_t.prt	165 KB
5	BCN45BL600_id373_x_t.prt	149 KB
6	BCN45BL800_id380_x_t.prt	151 KB
7	BSPP-G1-8_id425_x_t.prt	114 KB
8	Band_id161_x_t.prt	92.5 KB
9	Bracket Air Clamp_id48_x_t.prt	103 KB
10	CLH06-G1_id479_x_t.prt	57 KB
11	CLH06-G1_id493_x_t.prt	59 KB
12	CLH06-G1_id703_x_t.prt	58.5 KB
13	CLH06-HEAD_id487_x_t.prt	144 KB
14	CLH06BOLT_id482_x_t.prt	102 KB
15	CLT06-L_id422_x_t.prt	60 KB
16	CLT06-L_id448_x_t.prt	60.5 KB
17	CLT06-R_id462_x_t.prt	61 KB
18	CLT06cylinder_L-TYPE__id442_x_t.prt	218 KB
19	CLT06cylinder_R-TYPE__id473_x_t.prt	218 KB
20	CLT06link_id432_x_t.prt	195 KB
21	CLT06piston_id437_x_t.prt	168 KB
22	CNC for steel_id270_x_t.prt	93.5 KB
23	CutterAssembly_11M__id398_x_t.prt	58 KB
24	CutterBody_MED__id411_x_t.prt	133 KB
25	DNM400 Table_id536_x_t.prt	90 KB
26	DNM400 Table_id541_x_t.prt	380 KB
27	ER Collet_ER11__id416_x_t.prt	249 KB
28	Endmill_APKT_Insert_5008mm_1_id247_x_t.prt	140 KB
29	Endmill_APKT_Insert_5080mm_id239_x_t.prt	57 KB
30	FYH UC206_id641_x_t.prt	272 KB
31	Gear Case_id57_x_t.prt	70.5 KB
32	Gear Case_id62_x_t.prt	89.5 KB
33	Gear Case_id67_x_t.prt	102 KB
34	Gear Case_id72_x_t.prt	87.5 KB
35	Gear Case_id77_x_t.prt	2.89 MB
36	LINGUETTA_FORMA_A-10x8x32-8.8-ISO_773_00_id670_x_t.prt	119 KB
37	Lettering_id101_x_t.prt	126 KB
38	Lettering_id106_x_t.prt	159 KB
39	Lettering_id111_x_t.prt	148 KB
40	Lettering_id116_x_t.prt	158 KB
41	Lettering_id121_x_t.prt	113 KB
42	Lettering_id126_x_t.prt	93.5 KB
43	Lettering_id131_x_t.prt	140 KB
44	Lettering_id136_x_t.prt	110 KB
45	Lettering_id141_x_t.prt	109 KB
46	Lettering_id146_x_t.prt	109 KB
47	Lettering_id151_x_t.prt	148 KB
48	Lettering_id156_x_t.prt	109 KB
49	Lettering_id86_x_t.prt	104 KB
50	Lettering_id91_x_t.prt	158 KB
51	Lettering_id96_x_t.prt	113 KB
52	M16 Machine Tap_id83_x_t.prt	80 KB
53	Nut_id406_x_t.prt	172 KB
54	OP1_id45_x_t.prt	67 KB
55	Part3^CNC for steel_id273_x_t.prt	95 KB
56	Part3_id329_x_t.prt	314 KB
57	Part5_id352_x_t.prt	231 KB
58	Part6_id316_x_t.prt	201 KB
59	Part7_id303_x_t.prt	137 KB
60	Pull Stud_id401_x_t.prt	115 KB
61	RONDELLA EL. - DIN 127 M 16_id653_x_t.prt	97.5 KB
62	Rotate Table no 2_id501_x_t.prt	102 KB
63	Rotate Table no 2_id506_x_t.prt	102 KB
64	Rotate Table no 2_id511_x_t.prt	103 KB
65	Rotate Table no 2_id516_x_t.prt	95.5 KB
66	Rotate Table no 2_id521_x_t.prt	95.5 KB
67	Rotate Table no 2_id526_x_t.prt	95.5 KB
68	Rotate Table no 2_id531_x_t.prt	175 KB
69	STD_010_GIREVOLE_MAN_005_A_id675_x_t.prt	138 KB
70	STD_010_GIREVOLE_MAN_005_A_id680_x_t.prt	120 KB
71	STD_010_GIREVOLE_MAN_005_A_id685_x_t.prt	93.5 KB
72	STD_010_GIREVOLE_MAN_005_A_id690_x_t.prt	96.5 KB
73	Shank1_id171_x_t.prt	88 KB
74	Shank2_id166_x_t.prt	251 KB
75	Shank3_id176_x_t.prt	2.63 MB
76	Stand L_Default_As Machined___id606_x_t.prt	94 KB
77	Stand L_Default_As Machined___id611_x_t.prt	95.5 KB
78	Stand L_Default_As Machined___id616_x_t.prt	95 KB
79	Stand L_Default_As Machined___id621_x_t.prt	95.5 KB
80	Stand L_Default_As Machined___id626_x_t.prt	95.5 KB
81	Stand L_Default_As Machined___id631_x_t.prt	120 KB
82	Stand L_Default_As Machined___id636_x_t.prt	100 KB
83	Stand_Default_As Machined___id546_x_t.prt	105 KB
84	Stand_Default_As Machined___id551_x_t.prt	98 KB
85	Stand_Default_As Machined___id556_x_t.prt	91.5 KB
86	Stand_Default_As Machined___id561_x_t.prt	105 KB
87	Stand_Default_As Machined___id566_x_t.prt	99.5 KB
88	Stand_Default_As Machined___id571_x_t.prt	93.5 KB
89	Stand_Default_As Machined___id576_x_t.prt	95 KB
90	Stand_Default_As Machined___id581_x_t.prt	94.5 KB
91	Stand_Default_As Machined___id586_x_t.prt	95 KB
92	Stand_Default_As Machined___id591_x_t.prt	95 KB
93	Stand_Default_As Machined___id596_x_t.prt	120 KB
94	Stand_Default_As Machined___id601_x_t.prt	99.5 KB
95	Thread Mill_id265_x_t.prt	1.02 MB
96	VITE TE - ISO 4017 - M16x40_id648_x_t.prt	128 KB
97	bady_id392_x_t.prt	344 KB
98	chuck.prt;CHUCK_id185_x_t.prt	238 KB
99	chuck_collar.prt;CHUCK_COLLAR_id190_x_t.prt	728 KB
100	drill 8_id195_x_t.prt	403 KB
101	drill_14 chuck_id221_x_t.prt	55.5 KB
102	drill_14 chuck_id255_x_t.prt	56 KB
103	drill_8 chuck_id182_x_t.prt	59 KB
104	drill_8 chuck_id201_x_t.prt	59 KB
105	drill_8 chuck_id211_x_t.prt	61.5 KB
106	endmill_id234_x_t.prt	327 KB
107	knee adaptor um_id9_x_t.prt	175 KB
108	knee adaptor_id14_x_t.prt	145 KB
109	knee adaptor_id19_x_t.prt	116 KB
110	knee adaptor_id24_x_t.prt	122 KB
111	knee adaptor_id29_x_t.prt	108 KB
112	knee adaptor_id34_x_t.prt	158 KB
113	knee adaptor_id39_x_t.prt	106 KB
114	knee adaptor_id6_x_t.prt	62.5 KB
115	mast_id387_x_t.prt	316 KB
116	servo_id283_x_t.prt	796 KB
117	servo_id288_x_t.prt	104 KB
118	servo_id293_x_t.prt	105 KB
119	servo_id298_x_t.prt	102 KB
120	spindle_id278_x_t.prt	112 KB
121	standard_bit.prt;STANDARD_BIT_id228_x_t.prt	408 KB
122	vagone BCN45BL_id341_x_t.prt	121 KB
123	zhuang pei ti.prt	236 KB
124	╨┬╜¿╬─▒╛╬─╡╡.txt	266 B