微信扫码登录
作者其它图纸
查看更多
猜你喜欢
活动福利+发布图纸
登录注册
K9628-注塑机.8（ID:606277）
158
0
0
| # | 文件名称 | 文件大小 |
|---|---|---|
| 1 | 1_Assembly_Clamp_mechanism v111.sldasm | 129 KB |
| 2 | 1_Assembly_Ventilation_system v13.sldasm | 28 KB |
| 3 | 2_Assembly_2_Ventilation_system v28.sldasm | 46 KB |
| 4 | 3_Assembly_Ventilation_System v21.sldasm | 42 KB |
| 5 | 45x45H.ipt v5.sldprt | 95.5 KB |
| 6 | AS 1427 - M4 x 12(5) II(Mirror).sldprt | 57.5 KB |
| 7 | AS 1427 - M4 x 12(5) II.sldprt | 58.5 KB |
| 8 | AST_Bearings_UCP202 v1(Spiegeln).sldasm | 32.5 KB |
| 9 | AST_Bearings_UCP202 v1(Spiegeln).sldprt | 151 KB |
| 10 | AST_Bearings_UCP202 v5.sldasm | 31 KB |
| 11 | AST_Bearings_UCP202 v5.sldprt | 149 KB |
| 12 | Adapter(Spiegeln).sldprt | 27 KB |
| 13 | Adapter.sldprt | 27 KB |
| 14 | Adapter_150_2x80_1 v7.sldprt | 165 KB |
| 15 | Alu_L-profile_frame v26.sldasm | 47.5 KB |
| 16 | Alu_L-profile_frame v26.sldprt | 52 KB |
| 17 | Aluminum_Mounting_NEMA17 v21 (1).sldasm | 37 KB |
| 18 | Aluminum_Mounting_NEMA17 v21.sldasm | 36.5 KB |
| 19 | Anschluss Lüfter v3.sldprt | 75.5 KB |
| 20 | Anschluss1 v3.sldprt | 51.5 KB |
| 21 | Assembly_Pressure_Adapter_Extruder v11.sldasm | 49 KB |
| 22 | Assembly_Smart_Injector v58 v1.sldasm | 25.5 KB |
| 23 | Assembly_Smart_Injector v58.sldasm | 38 KB |
| 24 | Axial_bearing(Mirror).sldasm | 25.5 KB |
| 25 | Axial_bearing.sldasm | 25.5 KB |
| 26 | Axial_bearing_mirrored(Mirror).sldasm | 26 KB |
| 27 | Axial_bearing_mirrored.sldasm | 25.5 KB |
| 28 | Bearing 1-1 int(Mirror).sldprt | 219 KB |
| 29 | Bearing 1-1 int.sldprt | 220 KB |
| 30 | Bearing 1-2 ball(Mirror).sldprt | 25 KB |
| 31 | Bearing 1-2 ball.sldprt | 25 KB |
| 32 | Bearing 1-3 ext(Mirror).sldprt | 68.5 KB |
| 33 | Bearing 1-3 ext.sldprt | 68.5 KB |
| 34 | Bearing_30203 v3(Mirror).sldprt | 580 KB |
| 35 | Bearing_30203 v3.sldprt | 581 KB |
| 36 | Bearing_block(Mirror).sldasm | 25 KB |
| 37 | Bearing_block.sldasm | 24.5 KB |
| 38 | Bearing_cover v6(Mirror).sldasm | 26.5 KB |
| 39 | Bearing_cover v6(Mirror).sldprt | 40.5 KB |
| 40 | Bearing_cover v8.sldasm | 26 KB |
| 41 | Bearing_cover v8.sldprt | 40.5 KB |
| 42 | Bearing_covering (1).sldasm | 25 KB |
| 43 | Bearing_covering v1(Spiegeln).sldasm | 25.5 KB |
| 44 | Bearing_covering v2(Mirror).sldasm | 25.5 KB |
| 45 | Bearing_covering v3 (1).sldasm | 25 KB |
| 46 | Bearing_covering v3.sldasm | 25 KB |
| 47 | Bearing_covering(Mirror) (1).sldprt | 43.5 KB |
| 48 | Bearing_covering(Mirror).sldasm | 25 KB |
| 49 | Bearing_covering(Spiegeln) (1).sldprt | 43.5 KB |
| 50 | Bearing_covering(Spiegeln) (3).sldasm | 25.5 KB |
| 51 | Bearing_covering.sldprt | 43.5 KB |
| 52 | Bearing_damping v1(Spiegeln).sldprt | 27 KB |
| 53 | Bearing_damping v2.sldprt | 27 KB |
| 54 | Belt_conveyor1.sldprt | 30.5 KB |
| 55 | Belt_conveyor2.sldprt | 30.5 KB |
| 56 | Bottom (1).sldprt | 152 KB |
| 57 | Bottom(Mirror).sldprt | 150 KB |
| 58 | Bottom.sldprt | 759 KB |
| 59 | Bulge (1).sldprt | 28 KB |
| 60 | Bulge (2).sldprt | 28 KB |
| 61 | Bulge (3).sldprt | 28 KB |
| 62 | Bulge (4).sldprt | 28 KB |
| 63 | Bulge (5).sldprt | 28 KB |
| 64 | Bulge(Mirror) (1).sldprt | 28 KB |
| 65 | Bulge(Mirror) (2)(Mirror).sldprt | 28 KB |
| 66 | Bulge(Mirror) (2).sldprt | 28 KB |
| 67 | Bulge(Mirror) (3).sldprt | 28 KB |
| 68 | Bulge(Mirror) (4).sldprt | 28 KB |
| 69 | Bulge(Mirror) (5).sldprt | 28 KB |
| 70 | Bulge(Mirror) (6).sldprt | 28 KB |
| 71 | Bulge(Mirror).sldprt | 28 KB |
| 72 | Bulge(Spiegeln) (1)(Mirror).sldprt | 28 KB |
| 73 | Bulge(Spiegeln) (1)(Spiegeln)(Mirror).sldprt | 28.5 KB |
| 74 | Bulge(Spiegeln) (1)(Spiegeln).sldprt | 28 KB |
| 75 | Bulge(Spiegeln) (1).sldprt | 28 KB |
| 76 | Bulge(Spiegeln) (2)(Mirror).sldprt | 28 KB |
| 77 | Bulge(Spiegeln) (2).sldprt | 28 KB |
| 78 | Bulge(Spiegeln) (5)(Spiegeln).sldprt | 28 KB |
| 79 | Bulge(Spiegeln) (5).sldprt | 28 KB |
| 80 | Bulge(Spiegeln) (6).sldprt | 28 KB |
| 81 | Bulge(Spiegeln)(Mirror).sldprt | 28 KB |
| 82 | Bulge(Spiegeln).sldprt | 28 KB |
| 83 | Bulge.sldprt | 28 KB |
| 84 | Claw_Clutch v10.sldasm | 27 KB |
| 85 | Component1 (1).sldprt | 32.5 KB |
| 86 | Component1 (2).sldasm | 26.5 KB |
| 87 | Component1 (2).sldprt | 89 KB |
| 88 | Component1 (3).sldprt | 724 KB |
| 89 | Component1(Mirror).sldprt | 32.5 KB |
| 90 | Component1.sldprt | 37.5 KB |
| 91 | Component2 (1).sldprt | 47 KB |
| 92 | Component2.sldprt | 35.5 KB |
| 93 | Component3 (1).sldprt | 31.5 KB |
| 94 | Component3(Mirror).sldprt | 29 KB |
| 95 | Component3.sldprt | 34 KB |
| 96 | Component4.sldprt | 34 KB |
| 97 | Connecter v2(Mirror).sldprt | 100 KB |
| 98 | Connecter v4(Spiegeln) (1).sldprt | 96.5 KB |
| 99 | Connecter v4(Spiegeln).sldprt | 96 KB |
| 100 | Connecter v5 (1).sldprt | 97 KB |
| 101 | Connecter v5 (2).sldprt | 96 KB |
| 102 | Connecter v5 (3).sldprt | 95.5 KB |
| 103 | Connecter v5.sldprt | 96.5 KB |
| 104 | Connecter v6 (1).sldprt | 100 KB |
| 105 | Connecter v6.sldprt | 97 KB |
| 106 | Connecter.sldasm | 33.5 KB |
| 107 | E Stop Button v1.sldprt | 269 KB |
| 108 | Extruder v54.sldasm | 53 KB |
| 109 | Extruder v54.sldprt | 36.5 KB |
| 110 | Extruder_forceadapter v9.sldprt | 29 KB |
| 111 | Extruder_snail.sldprt | 821 KB |
| 112 | Frame v39.sldasm | 30.5 KB |
| 113 | Frame v39.sldprt | 169 KB |
| 114 | Funnel_sheet_front v14.sldasm | 38.5 KB |
| 115 | Funnel_sheet_front v14.sldprt | 52 KB |
| 116 | Gewindestange_M12 v2(Spiegeln).sldprt | 28.5 KB |
| 117 | Gewindestange_M12 v8.sldprt | 28.5 KB |
| 118 | HTD_Nema17_T5_15tooth v10.sldprt | 112 KB |
| 119 | Halter_Feingewinde v6 v1(Spiegeln).sldprt | 31 KB |
| 120 | Halter_Feingewinde v6 v1.sldprt | 30.5 KB |
| 121 | Heizmanschette v1.sldprt | 27 KB |
| 122 | Heizmanschette_auf_Düse v1.sldprt | 27 KB |
| 123 | Insert mold 26-04-2018 v1.sldprt | 338 KB |
| 124 | Isolation v3.sldprt | 27 KB |
| 125 | LCD 20x4 Display.sldprt | 412 KB |
| 126 | LCD Assem v1.sldasm | 24.5 KB |
| 127 | Lageraufnahme v9(Spiegeln) (1).sldprt | 40 KB |
| 128 | Lageraufnahme_links v10.sldprt | 40 KB |
| 129 | Limitswitch v1.sldprt | 324 KB |
| 130 | Limitswitch_Trigger v5.sldasm | 28 KB |
| 131 | Limitswitch_Trigger v5.sldprt | 33.5 KB |
| 132 | M12 Nut v3 v1(Mirror).sldprt | 154 KB |
| 133 | M12 Nut v3 v1.sldprt | 154 KB |
| 134 | M12_Thread v2(Mirror).sldprt | 25.5 KB |
| 135 | M12_Thread v5.sldprt | 25.5 KB |
| 136 | M4x10 v3(Mirror).sldasm | 26 KB |
| 137 | M4x10 v3(Mirror).sldprt | 34.5 KB |
| 138 | M4x10 v3(Spiegeln) (1)(Mirror).sldasm | 27 KB |
| 139 | M4x10 v3(Spiegeln) (1)(Mirror).sldprt | 34.5 KB |
| 140 | M4x10 v3(Spiegeln) (1).sldasm | 26.5 KB |
| 141 | M4x10 v3(Spiegeln) (1).sldprt | 34.5 KB |
| 142 | M4x10 v3(Spiegeln)(Mirror).sldasm | 26.5 KB |
| 143 | M4x10 v3(Spiegeln)(Mirror).sldprt | 34.5 KB |
| 144 | M4x10 v3(Spiegeln)(Spiegeln)(Mirror).sldasm | 27.5 KB |
| 145 | M4x10 v3(Spiegeln)(Spiegeln)(Mirror).sldprt | 35 KB |
| 146 | M4x10 v3(Spiegeln)(Spiegeln).sldasm | 26.5 KB |
| 147 | M4x10 v3(Spiegeln)(Spiegeln).sldprt | 34.5 KB |
| 148 | M4x10 v3(Spiegeln).sldasm | 26 KB |
| 149 | M4x10 v3(Spiegeln).sldprt | 34.5 KB |
| 150 | M4x8(Mirror).sldasm | 24.5 KB |
| 151 | M4x8(Spiegeln) (1)(Mirror).sldasm | 25.5 KB |
| 152 | M4x8(Spiegeln) (1).sldasm | 24.5 KB |
| 153 | M4x8(Spiegeln)(Mirror).sldasm | 25 KB |
| 154 | M4x8(Spiegeln)(Spiegeln)(Mirror).sldasm | 25.5 KB |
| 155 | M4x8(Spiegeln)(Spiegeln).sldasm | 25 KB |
| 156 | M4x8(Spiegeln).sldasm | 24.5 KB |
| 157 | M4x8.sldasm | 24.5 KB |
| 158 | M5 nut v1(Mirror) (1) (1).sldprt | 36 KB |
| 159 | M5 nut v1(Mirror) (1).sldprt | 36 KB |
| 160 | M5 nut v1(Mirror)(Mirror).sldprt | 36 KB |
| 161 | M5 nut v1(Mirror).sldprt | 36 KB |
| 162 | M6 X 30 v2(Mirror) (1).sldprt | 33 KB |
| 163 | M6 X 30 v2(Mirror).sldprt | 33.5 KB |
| 164 | M6_Nut v1(Mirror).sldprt | 99 KB |
| 165 | M6_Nut v1.sldprt | 99 KB |
| 166 | M6x65_Screw v4(Mirror).sldprt | 811 KB |
| 167 | M6x65_Screw v4.sldprt | 812 KB |
| 168 | M8 Nut v5 v1(Mirror).sldprt | 147 KB |
| 169 | M8x16 v3(Mirror) (1).sldasm | 26 KB |
| 170 | M8x16 v3(Mirror) (1).sldprt | 34 KB |
| 171 | M8x16 v3(Mirror).sldasm | 26 KB |
| 172 | M8x16 v3(Mirror).sldprt | 34 KB |
| 173 | M8x16 v3.sldasm | 26 KB |
| 174 | M8x16 v3.sldprt | 34 KB |
| 175 | M8x16 v3_DATAKIT_841.sldprt | 34 KB |
| 176 | M8x170 v1(Mirror).sldprt | 1.99 MB |
| 177 | M8x170 v1.sldprt | 1.99 MB |
| 178 | M8x25 v2 (1).sldasm | 26 KB |
| 179 | M8x25 v2 (1).sldprt | 34 KB |
| 180 | M8x25 v2(Mirror) (1).sldasm | 26 KB |
| 181 | M8x25 v2(Mirror) (1).sldprt | 34 KB |
| 182 | M8x25 v2.sldasm | 26 KB |
| 183 | M8x25 v2.sldprt | 34 KB |
| 184 | M8x30 v3(Mirror) (1).sldasm | 26 KB |
| 185 | M8x30 v3(Mirror) (1).sldprt | 34 KB |
| 186 | M8x30 v3(Mirror)(Mirror).sldasm | 26.5 KB |
| 187 | M8x30 v3(Mirror)(Mirror).sldprt | 34 KB |
| 188 | M8x30 v3(Mirror).sldasm | 26 KB |
| 189 | M8x30 v3(Mirror).sldprt | 34 KB |
| 190 | M8x30 v3.sldasm | 25.5 KB |
| 191 | M8x30 v3.sldprt | 34 KB |
| 192 | M8x35 v2.sldasm | 26 KB |
| 193 | M8x35 v2.sldprt | 34 KB |
| 194 | M8x55 (1)(Spiegeln) (1).sldasm | 25 KB |
| 195 | M8x55 (1)(Spiegeln)(Spiegeln).sldasm | 25.5 KB |
| 196 | M8x55 (1)(Spiegeln).sldasm | 25 KB |
| 197 | M8x55 (1).sldasm | 24.5 KB |
| 198 | M8x55 v5 (1).sldasm | 26 KB |
| 199 | M8x55 v5 (1).sldprt | 104 KB |
| 200 | M8x55 v5.sldasm | 26 KB |
| 201 | M8x55 v5.sldprt | 104 KB |
| 202 | M8x55(Mirror).sldasm | 24.5 KB |
| 203 | M8x55(Spiegeln)(Mirror).sldasm | 25 KB |
| 204 | M8x55(Spiegeln).sldasm | 24.5 KB |
| 205 | M8x55.sldasm | 24.5 KB |
| 206 | Magnet v1.sldprt | 26 KB |
| 207 | Motor_Positioner v15.sldasm | 50 KB |
| 208 | Motor_Positioner v15.sldprt | 229 KB |
| 209 | Mounter_Extruder v6.sldprt | 32.5 KB |
| 210 | Mounting_Hall_Extruder v23.sldasm | 32.5 KB |
| 211 | Mounting_Hall_Sensor_Component1 v9.sldasm | 29.5 KB |
| 212 | Mounting_Hall_Sensor_Component1 v9.sldprt | 61 KB |
| 213 | Mounting_NEMA34 v11.sldasm | 43 KB |
| 214 | Mounting_NEMA34 v11.sldprt | 35 KB |
| 215 | Mounting_Nema17 v11.sldprt | 72.5 KB |
| 216 | Mounting_plate_movable.sldasm | 25 KB |
| 217 | Mounting_thread_BH v15 (1).sldasm | 31 KB |
| 218 | Mounting_thread_BH v15 (1).sldprt | 63.5 KB |
| 219 | Mounting_thread_BH v15.sldasm | 31 KB |
| 220 | Mounting_thread_BH v15.sldprt | 63.5 KB |
| 221 | Mounting_thread_SH v5 (1) (1).sldprt | 61 KB |
| 222 | Mounting_thread_SH v5 (1).sldprt | 60.5 KB |
| 223 | Mounting_thread_SH v5 (2).sldprt | 60.5 KB |
| 224 | Mounting_thread_SH v5.sldprt | 60.5 KB |
| 225 | Mountingplate_fixed (1).sldasm | 37.5 KB |
| 226 | Mountingplate_fixed v9.sldasm | 25 KB |
| 227 | Mountingplate_fixed.sldprt | 77 KB |
| 228 | Mountingplate_movable v2.sldasm | 25 KB |
| 229 | Mountingplate_movable.sldprt | 70.5 KB |
| 230 | NEMA 34 86mm W PLANETARY GEARBOX v1.sldprt | 61 KB |
| 231 | Nema17 v1.sldprt | 83 KB |
| 232 | Nozzle.sldprt | 31 KB |
| 233 | Nut M6 X 1 v1(Mirror).sldprt | 70.5 KB |
| 234 | Nut_M12x1.5 v1(Mirror) (1).sldprt | 147 KB |
| 235 | Nut_M12x1.5 v1(Mirror)(Mirror).sldprt | 146 KB |
| 236 | Nut_M12x1.5 v1(Mirror).sldprt | 147 KB |
| 237 | Nut_M12x1.5 v5(Mirror) (1).sldprt | 147 KB |
| 238 | Nut_M12x1.5 v5(Mirror).sldprt | 147 KB |
| 239 | Nut_M12x1.5 v5.sldprt | 146 KB |
| 240 | Nut_M5 v1.sldprt | 36 KB |
| 241 | Nut_M6 v1.sldprt | 70 KB |
| 242 | Nut_M8 v1.sldprt | 148 KB |
| 243 | Pipe_1 (1).sldprt | 27 KB |
| 244 | Pipe_1.sldprt | 27 KB |
| 245 | Pipe_2 (1).sldprt | 41.5 KB |
| 246 | Pipe_2.sldprt | 27 KB |
| 247 | Positioner v1(Mirror).sldprt | 27 KB |
| 248 | Positioner v1.sldprt | 27 KB |
| 249 | Preassembly_Pressurepart v51.sldasm | 35.5 KB |
| 250 | SBR body(Mirror).sldprt | 86 KB |
| 251 | SBR body.sldprt | 85 KB |
| 252 | SBR-12 v12.sldasm | 34.5 KB |
| 253 | SBR-12 v5(Mirror).sldasm | 35.5 KB |
| 254 | SBR12UU (1).sldasm | 74.5 KB |
| 255 | SBR12UU(Mirror).sldasm | 79.5 KB |
| 256 | SBR12UU.sldasm | 74.5 KB |
| 257 | Screw(Mirror).sldprt | 38.5 KB |
| 258 | Screw.sldprt | 38.5 KB |
| 259 | Seger(Mirror).sldprt | 38 KB |
| 260 | Seger.sldprt | 38 KB |
| 261 | Shaft(Mirror).sldprt | 69 KB |
| 262 | Shaft.sldprt | 70 KB |
| 263 | Sheet_panel_mounting v9.sldasm | 26.5 KB |
| 264 | Sheet_panel_mounting v9.sldprt | 28.5 KB |
| 265 | Smart_Injector v15.err | 32 KB |
| 266 | Smart_Injector v15.sldasm | 28 KB |
| 267 | Smart_Injector v15.step | 101 MB |
| 268 | T-slot nut M8 3030 v2(Mirror) (1).sldprt | 49.5 KB |
| 269 | T-slot nut M8 3030 v2(Mirror) (2).sldprt | 49.5 KB |
| 270 | T-slot nut M8 3030 v2(Mirror) (3).sldprt | 49.5 KB |
| 271 | T-slot nut M8 3030 v2(Mirror) (4).sldprt | 49.5 KB |
| 272 | T-slot nut M8 3030 v2(Mirror)(Mirror).sldprt | 49.5 KB |
| 273 | T-slot nut M8 3030 v2(Mirror).sldprt | 49 KB |
| 274 | T-slot_nut_M8 v2.sldprt | 49 KB |
| 275 | TH_M8x55 v3(Mirror).sldasm | 26 KB |
| 276 | TH_M8x55 v3(Mirror).sldprt | 104 KB |
| 277 | TH_M8x55 v3(Spiegeln) (2)(Spiegeln).sldasm | 27 KB |
| 278 | TH_M8x55 v3(Spiegeln) (2)(Spiegeln).sldprt | 104 KB |
| 279 | TH_M8x55 v3(Spiegeln) (2).sldasm | 26.5 KB |
| 280 | TH_M8x55 v3(Spiegeln) (2).sldprt | 104 KB |
| 281 | TH_M8x55 v3(Spiegeln) (3).sldasm | 26.5 KB |
| 282 | TH_M8x55 v3(Spiegeln) (3).sldprt | 104 KB |
| 283 | TH_M8x55 v3(Spiegeln)(Mirror).sldasm | 26.5 KB |
| 284 | TH_M8x55 v3(Spiegeln)(Mirror).sldprt | 104 KB |
| 285 | TH_M8x55 v3(Spiegeln).sldasm | 26 KB |
| 286 | TH_M8x55 v3(Spiegeln).sldprt | 104 KB |
| 287 | Tentioner v18 (1).sldasm | 31 KB |
| 288 | Tentioner v18 (1).sldprt | 35.5 KB |
| 289 | Tentioner v18.sldasm | 30.5 KB |
| 290 | Tentioner v18.sldprt | 35.5 KB |
| 291 | Thread_holder(Spiegeln).sldasm | 25.5 KB |
| 292 | Thread_holder.sldasm | 24.5 KB |
| 293 | Thrust ball bearings, single direction 51101 v1(Mirror).sldasm | 45 KB |
| 294 | Thrust ball bearings, single direction 51101 v1(Spiegeln)(Mirror).sldasm | 47 KB |
| 295 | Thrust ball bearings, single direction 51101 v1(Spiegeln).sldasm | 45.5 KB |
| 296 | Thrust ball bearings, single direction 51101 v2.sldasm | 42.5 KB |
| 297 | To be exchanged and deleted M5x12 v1.sldprt | 114 KB |
| 298 | Top_Rod.sldprt | 167 KB |
| 299 | Topside mold 26-04-2018 v5.sldprt | 383 KB |
| 300 | Track_Positioner v6.sldprt | 30.5 KB |
| 301 | Underside mold 26-04-2018 v4.sldprt | 237 KB |
| 302 | Untitled v11(Mirror).sldasm | 47.5 KB |
| 303 | Untitled v11(Mirror).sldprt | 52 KB |
| 304 | User_Panel_2.1 v33.sldasm | 36 KB |
| 305 | User_Panel_2.1 v33.sldprt | 667 KB |
| 306 | Ventilation_Extruder v6.sldprt | 77.5 KB |
| 307 | Ventilation_Mold v10.sldprt | 100 KB |
| 308 | Washer_M12 v1(Mirror).sldprt | 30.5 KB |
| 309 | Washer_M12 v1.sldprt | 30.5 KB |
| 310 | Washer_M8 v1(Mirror).sldprt | 30.5 KB |
| 311 | Washer_M8 v1.sldprt | 30.5 KB |
| 312 | Zahnscheibe Groß v2 v13.sldasm | 34.5 KB |
| 313 | Zahnscheibe Groß v2 v13.sldprt | 410 KB |
| 314 | Zahnscheibe Groß v2 v4(Mirror).sldasm | 36 KB |
| 315 | Zahnscheibe Groß v2 v4(Mirror).sldprt | 411 KB |
| 316 | alu.sldprt | 33 KB |
| 317 | circlip v7.sldasm | 31 KB |
| 318 | circlip v7.sldprt | 42 KB |
| 319 | hex_socket_cylindrical_head_M3x8 v1.sldprt | 441 KB |
| 320 | hex_socket_cylindrical_head_M4x10 v5 (1).sldasm | 27 KB |
| 321 | hex_socket_cylindrical_head_M4x10 v5 (1).sldprt | 35 KB |
| 322 | hex_socket_cylindrical_head_M4x10 v5.sldasm | 27 KB |
| 323 | hex_socket_cylindrical_head_M4x10 v5.sldprt | 35 KB |
| 324 | hex_socket_cylindrical_head_M5x10 v1(Mirror).sldprt | 33 KB |
| 325 | hex_socket_cylindrical_head_M5x10 v1.sldprt | 32 KB |
| 326 | hex_socket_cylindrical_head_M5x16 v1(Mirror) (1).sldprt | 33 KB |
| 327 | hex_socket_cylindrical_head_M5x16 v1(Mirror)(Mirror).sldprt | 32.5 KB |
| 328 | hex_socket_cylindrical_head_M5x16 v1(Mirror).sldprt | 33 KB |
| 329 | hex_socket_cylindrical_head_M5x16 v1.sldprt | 32 KB |
| 330 | hex_socket_cylindrical_head_M5x20 v1(Mirror) (1).sldprt | 33 KB |
| 331 | hex_socket_cylindrical_head_M5x20 v1.sldprt | 32 KB |
| 332 | hex_socket_cylindrical_head_M5x25 v1.sldprt | 32 KB |
| 333 | hex_socket_cylindrical_head_M6x25 v7.sldprt | 33 KB |
| 334 | hex_socket_cylindrical_head_M6x30 v2.sldprt | 33 KB |
| 335 | hex_socket_set_screw_with_flat_point_M8x10 v1.sldprt | 31.5 KB |
| 336 | mounting_limitswitch v25 (1).sldasm | 37 KB |
| 337 | mounting_limitswitch v25.sldasm | 37 KB |
| 338 | wkladka.sldprt | 37 KB |
| 339 | Корпус1(Mirror).sldprt | 33 KB |
| 340 | Корпус1(Spiegeln)(Mirror).sldprt | 33.5 KB |
| 341 | Корпус1(Spiegeln).sldprt | 33 KB |
| 342 | Корпус1.sldprt | 33.5 KB |
| 343 | Корпус2(Mirror).sldprt | 91.5 KB |
| 344 | Корпус2(Spiegeln)(Mirror).sldprt | 91.5 KB |
| 345 | Корпус2(Spiegeln).sldprt | 91.5 KB |
| 346 | Корпус2.sldprt | 91.5 KB |
| 347 | Сепаратор(Mirror).sldprt | 83 KB |
| 348 | Сепаратор(Spiegeln)(Mirror).sldprt | 82 KB |
| 349 | Сепаратор(Spiegeln).sldprt | 83 KB |
| 350 | Сепаратор.sldprt | 82 KB |
| 351 | Шар 4,762(Mirror).sldprt | 25 KB |
| 352 | Шар 4,762(Spiegeln)(Mirror).sldprt | 25 KB |
| 353 | Шар 4,762(Spiegeln).sldprt | 25 KB |
| 354 | Шар 4,762.sldprt | 25 KB |
免责申明:
本网站模型由用户自行上传，如权利人发现存在误传其作品情形，请及时与本站联系。
立即下载
此图纸下载需要20金币
图纸ID：606277
文件大小：48.84M
软件版本：SOLIDWORKS,STEP
图纸格式：sldasm,sldprt,step
参数/编辑：可修改，包括参数
上传时间：2024-08-03
图纸介绍：
发布者
屿双网fkkq
作品: 2722
粉丝: 1
提示
×
下载该图档需要消耗20金币！
确认下载
客服
签到
分享
