微信扫码登录
作者其它图纸
查看更多
猜你喜欢
活动福利+发布图纸
登录注册
自动循环清洗喷雾机（ID:627425）
| # | 文件名称 | 文件大小 |
|---|---|---|
| 1 | 125inSchedule40(1.25 in, Schedule 40, 1).sldprt | 51.5 KB |
| 2 | 125inSchedule40(1.25 in, Schedule 40, 3).sldprt | 51.5 KB |
| 3 | 125inSchedule40(1.25 in, Schedule 40, 4).sldprt | 51.5 KB |
| 4 | 125inSchedule40(1.25 in, Schedule 40, 5).sldprt | 51.5 KB |
| 5 | 125inSchedule40(1.25 in, Schedule 40, 7).sldprt | 51.5 KB |
| 6 | 125inSchedule40(1.25 in, Schedule 40, 8).sldprt | 51.5 KB |
| 7 | 14hub1.sldprt | 93.5 KB |
| 8 | 15inSchedule40^Pipe_6-ASM-Drier Booth(1.5 in, Schedule 40).sldprt | 52 KB |
| 9 | 15inSchedule40^Pipe_6-ASM-Drier Booth(1.5 in, Schedule 40, 1).sldprt | 52 KB |
| 10 | 24b-1_a-1z.sldprt | 60 KB |
| 11 | 24b-1_b.sldprt | 58.5 KB |
| 12 | 45deg lr metric elbow(45L LR METRIC 2 Sch 40).sldprt | 60.5 KB |
| 13 | 90deg lr inch elbow(90L LR Inch 1.25 Sch 40).sldprt | 60.5 KB |
| 14 | 90deg lr inch elbow(90L LR Inch 1.5 Sch40).sldprt | 61 KB |
| 15 | AC40-03-36.sldasm | 128 KB |
| 16 | AC40-03-36_AC3009A AF Body-1.sldprt | 81 KB |
| 17 | AC40-03-36_AC3009A AF Bowl Assy.sldasm | 115 KB |
| 18 | AC40-03-36_AC3009A AF Bowl.sldprt | 103 KB |
| 19 | AC40-03-36_AC3009A AF Drain.sldprt | 59 KB |
| 20 | AC40-03-36_AC3009A AL Body-1.sldprt | 114 KB |
| 21 | AC40-03-36_AC3009A AL Bowl Assy.sldasm | 115 KB |
| 22 | AC40-03-36_AC3009A AL Bowl.sldprt | 103 KB |
| 23 | AC40-03-36_AC3009A AL Drain.sldprt | 59 KB |
| 24 | AC40-03-36_AC3009A AR Body-1.sldprt | 179 KB |
| 25 | AC40-03-36_AC3009A Gauge(40)-1.sldprt | 64.5 KB |
| 26 | AC40-03-36_AC3009A Plug.sldprt | 54 KB |
| 27 | AC40-03-36_AC3009A Spacer Front Plate.sldprt | 69.5 KB |
| 28 | AC40-03-36_AC3009A Spacer Interface.sldprt | 87 KB |
| 29 | AC40-03-36_AC3009A Spacer Rear Plate.sldprt | 79.5 KB |
| 30 | AC40-03-36_AC3009A Spacer-1.sldasm | 120 KB |
| 31 | AC40-03-36_AC3009A Spacer.sldasm | 120 KB |
| 32 | ASM-Bucket System Fix.sldasm | 119 KB |
| 33 | ASM-Catterpilar System Fix-1.sldasm | 201 KB |
| 34 | ASM-Catterpilar System Fix.sldasm | 201 KB |
| 35 | ASM-Chuck System.sldasm | 263 KB |
| 36 | ASM-Drier Booth-1.sldasm | 211 KB |
| 37 | ASM-Drier Booth.sldasm | 211 KB |
| 38 | ASM-Flang Spray Booth(Default).sldprt | 56 KB |
| 39 | ASM-Main Base System.sldasm | 238 KB |
| 40 | ASM-Main Base(Default_As Machined_).sldprt | 441 KB |
| 41 | ASM-Panel System.sldasm | 114 KB |
| 42 | ASM-Spray Booth(Default).sldprt | 82.5 KB |
| 43 | ASM-Spray System-1.sldasm | 230 KB |
| 44 | ASM-Spray System.sldasm | 230 KB |
| 45 | Adjusment Caterpilar(Default).sldprt | 52.5 KB |
| 46 | Anti Heater - Heater Booth.sldprt | 57 KB |
| 47 | Anti-Heater.sldprt | 60.5 KB |
| 48 | Assembly_Panel Utama.sldasm | 116 KB |
| 49 | Assy spray gun meiji A110-1.sldasm | 115 KB |
| 50 | Assy spray gun meiji A110-2.sldasm | 115 KB |
| 51 | Assy spray gun meiji A110-3.sldasm | 115 KB |
| 52 | Assy spray gun meiji A110.sldasm | 115 KB |
| 53 | Auto spray machine-01.SLDASM | 9.8 MB |
| 54 | BAse Adjusment Caterpillar.sldprt | 68 KB |
| 55 | BRACKET SPRAY GUN MEIJI.sldprt | 53 KB |
| 56 | Base 2 Slider.sldprt | 61.5 KB |
| 57 | Base Caterpillar.sldprt | 67 KB |
| 58 | Base Flange Atas.sldprt | 55 KB |
| 59 | Base Flange.sldprt | 56.5 KB |
| 60 | Base Panel Utama Bonding Inner SFM1810.sldprt | 55.5 KB |
| 61 | Base Slider.sldprt | 61 KB |
| 62 | Base pneumatic autospray.sldprt | 60.5 KB |
| 63 | Bearing-MCM05010H10K00-NSK_Bearing-MCM05010H10K00-NSK.sldprt | 80.5 KB |
| 64 | Belt Spray.sldprt | 54 KB |
| 65 | Block ThermoCouple.sldprt | 54 KB |
| 66 | Booth Spray-1.sldasm | 133 KB |
| 67 | Booth Spray.sldasm | 133 KB |
| 68 | Box Heater Booth.sldprt | 136 KB |
| 69 | Box Heater.sldprt | 88.5 KB |
| 70 | Box Panel Control Bonding Fix(Default).sldprt | 114 KB |
| 71 | Box Panel Utama(Default).sldprt | 183 KB |
| 72 | Bracket cyl rotary autospray.sldprt | 59.5 KB |
| 73 | Bracket cyl unit pick-up(revisi 2).sldprt | 59 KB |
| 74 | Bracket motor servo HC-KFS-23.sldprt | 62 KB |
| 75 | Brecket Cyl Capping(Default).sldprt | 64 KB |
| 76 | Brecket Cyl Lock Slider.sldprt | 56 KB |
| 77 | Brecket Lock Slider.sldprt | 54.5 KB |
| 78 | Bucket Flashing.sldprt | 64.5 KB |
| 79 | CAL75-1.sldasm | 119 KB |
| 80 | CAL75-2.sldasm | 119 KB |
| 81 | CAL75-3.sldasm | 119 KB |
| 82 | CAL75.sldasm | 119 KB |
| 83 | CAL75adjuster.sldprt | 52.5 KB |
| 84 | CAL75bearing.sldprt | 51.5 KB |
| 85 | CAL75body.sldprt | 63 KB |
| 86 | CAL75plate.sldprt | 58 KB |
| 87 | CAL75stopper.sldprt | 51 KB |
| 88 | CAL75swivel.sldprt | 70.5 KB |
| 89 | CAL75wheel.sldprt | 52.5 KB |
| 90 | CQ2A32-75D-1.sldasm | 113 KB |
| 91 | CQ2A32-75D.sldasm | 113 KB |
| 92 | CQ2A32-75D_CQ2 SnapRing.sldprt | 57 KB |
| 93 | CQ2A32-75D_CQ22031Rods.sldprt | 55 KB |
| 94 | CQ2A32-75D_CQ2Tube.sldprt | 86 KB |
| 95 | Capping Part.sldprt | 53 KB |
| 96 | Capping System-1.sldasm | 114 KB |
| 97 | Capping System.sldasm | 114 KB |
| 98 | Chain 2.sldprt | 56.5 KB |
| 99 | Chain Assy-1.sldasm | 165 KB |
| 100 | Chain Assy.sldasm | 165 KB |
| 101 | Chain Attachment.sldasm | 474 KB |
| 102 | Chain Fix-1.sldasm | 123 KB |
| 103 | Chain Fix-10.sldasm | 123 KB |
| 104 | Chain Fix-11.sldasm | 123 KB |
| 105 | Chain Fix-12.sldasm | 123 KB |
| 106 | Chain Fix-13.sldasm | 123 KB |
| 107 | Chain Fix-14.sldasm | 123 KB |
| 108 | Chain Fix-15.sldasm | 123 KB |
| 109 | Chain Fix-16.sldasm | 123 KB |
| 110 | Chain Fix-17.sldasm | 123 KB |
| 111 | Chain Fix-18.sldasm | 123 KB |
| 112 | Chain Fix-19.sldasm | 123 KB |
| 113 | Chain Fix-2.sldasm | 123 KB |
| 114 | Chain Fix-20.sldasm | 123 KB |
| 115 | Chain Fix-21.sldasm | 123 KB |
| 116 | Chain Fix-22.sldasm | 123 KB |
| 117 | Chain Fix-23.sldasm | 123 KB |
| 118 | Chain Fix-24.sldasm | 123 KB |
| 119 | Chain Fix-25.sldasm | 123 KB |
| 120 | Chain Fix-26.sldasm | 123 KB |
| 121 | Chain Fix-27.sldasm | 123 KB |
| 122 | Chain Fix-28.sldasm | 123 KB |
| 123 | Chain Fix-29.sldasm | 123 KB |
| 124 | Chain Fix-3.sldasm | 123 KB |
| 125 | Chain Fix-30.sldasm | 123 KB |
| 126 | Chain Fix-31.sldasm | 123 KB |
| 127 | Chain Fix-32.sldasm | 123 KB |
| 128 | Chain Fix-33.sldasm | 123 KB |
| 129 | Chain Fix-34.sldasm | 123 KB |
| 130 | Chain Fix-35.sldasm | 123 KB |
| 131 | Chain Fix-36.sldasm | 123 KB |
| 132 | Chain Fix-37.sldasm | 123 KB |
| 133 | Chain Fix-38.sldasm | 123 KB |
| 134 | Chain Fix-39.sldasm | 123 KB |
| 135 | Chain Fix-4.sldasm | 123 KB |
| 136 | Chain Fix-40.sldasm | 123 KB |
| 137 | Chain Fix-41.sldasm | 123 KB |
| 138 | Chain Fix-42.sldasm | 123 KB |
| 139 | Chain Fix-43.sldasm | 123 KB |
| 140 | Chain Fix-44.sldasm | 123 KB |
| 141 | Chain Fix-45.sldasm | 123 KB |
| 142 | Chain Fix-46.sldasm | 123 KB |
| 143 | Chain Fix-47.sldasm | 123 KB |
| 144 | Chain Fix-48.sldasm | 123 KB |
| 145 | Chain Fix-49.sldasm | 123 KB |
| 146 | Chain Fix-5.sldasm | 123 KB |
| 147 | Chain Fix-50.sldasm | 123 KB |
| 148 | Chain Fix-51.sldasm | 123 KB |
| 149 | Chain Fix-52.sldasm | 123 KB |
| 150 | Chain Fix-53.sldasm | 123 KB |
| 151 | Chain Fix-54.sldasm | 123 KB |
| 152 | Chain Fix-55.sldasm | 123 KB |
| 153 | Chain Fix-56.sldasm | 123 KB |
| 154 | Chain Fix-57.sldasm | 123 KB |
| 155 | Chain Fix-58.sldasm | 123 KB |
| 156 | Chain Fix-59.sldasm | 123 KB |
| 157 | Chain Fix-6.sldasm | 123 KB |
| 158 | Chain Fix-60.sldasm | 123 KB |
| 159 | Chain Fix-61.sldasm | 123 KB |
| 160 | Chain Fix-62.sldasm | 123 KB |
| 161 | Chain Fix-63.sldasm | 123 KB |
| 162 | Chain Fix-64.sldasm | 123 KB |
| 163 | Chain Fix-65.sldasm | 123 KB |
| 164 | Chain Fix-66.sldasm | 123 KB |
| 165 | Chain Fix-67.sldasm | 123 KB |
| 166 | Chain Fix-68.sldasm | 123 KB |
| 167 | Chain Fix-69.sldasm | 123 KB |
| 168 | Chain Fix-7.sldasm | 123 KB |
| 169 | Chain Fix-70.sldasm | 123 KB |
| 170 | Chain Fix-71.sldasm | 123 KB |
| 171 | Chain Fix-72.sldasm | 123 KB |
| 172 | Chain Fix-73.sldasm | 123 KB |
| 173 | Chain Fix-74.sldasm | 123 KB |
| 174 | Chain Fix-75.sldasm | 123 KB |
| 175 | Chain Fix-76.sldasm | 123 KB |
| 176 | Chain Fix-77.sldasm | 123 KB |
| 177 | Chain Fix-78.sldasm | 123 KB |
| 178 | Chain Fix-8.sldasm | 123 KB |
| 179 | Chain Fix-9.sldasm | 123 KB |
| 180 | Chain Fix.sldasm | 123 KB |
| 181 | Cluctc n Break.sldprt | 74 KB |
| 182 | Cover Anti Heater(Default).sldprt | 109 KB |
| 183 | Cover Caterpillar(Default).sldprt | 72 KB |
| 184 | Cover Main Heater.sldprt | 82.5 KB |
| 185 | Cover Sprocket.sldprt | 52.5 KB |
| 186 | Cover(Default).sldprt | 61.5 KB |
| 187 | Cover-MC-CV05010-00-NSK_Cover-MC-CV05010-00-NSK.sldprt | 83.5 KB |
| 188 | Cover-Unit-MC-CV05010-00-NSK_Cover-Unit-MC-CV05010-00-NSK-1.sldasm | 114 KB |
| 189 | Cover-Unit-MC-CV05010-00-NSK_Cover-Unit-MC-CV05010-00-NSK.sldasm | 114 KB |
| 190 | DeVILBISS AGGS522FYH13.sldprt | 448 KB |
| 191 | Door Panel Control Bonding(Default).sldprt | 82 KB |
| 192 | Door Panel Utama(Default).sldprt | 102 KB |
| 193 | Drier Booth.sldprt | 86 KB |
| 194 | End-Cap-MCM05010H10K00-NSK_End-Cap-MCM05010H10K00-NSK.sldprt | 63.5 KB |
| 195 | End-House-MCM05010H10K00-NSK_End-House-MCM05-NSK.sldprt | 62 KB |
| 196 | End-Seal-MCM05010H10K00-NSK_End-Seal-MCM05010H10K00-NSK.sldprt | 62.5 KB |
| 197 | FJFN12_75-1.sldasm | 111 KB |
| 198 | FJFN12_75-2.sldasm | 111 KB |
| 199 | FJFN12_75-3.sldasm | 111 KB |
| 200 | FJFN12_75.sldasm | 111 KB |
| 201 | FJFN12_75pad.sldprt | 55.5 KB |
| 202 | FJFN12nut.sldprt | 55 KB |
| 203 | Flange Bearing Adjusment.sldprt | 67.5 KB |
| 204 | Flange Bearing.sldprt | 58.5 KB |
| 205 | Flange Drier Booth(Default).sldprt | 56 KB |
| 206 | Flange Fan.sldprt | 54.5 KB |
| 207 | Flange Heater(Default).sldprt | 56 KB |
| 208 | Flange Sirkulasi Pre-Heat 2.sldprt | 54 KB |
| 209 | Flange Sirkulasi Pre-Heat.sldprt | 53 KB |
| 210 | Flange Slider Feeder(Default).sldprt | 61 KB |
| 211 | Frame Bucket(Default_As Machined_).sldprt | 102 KB |
| 212 | Front-House-MCM05010H10K00-NSK_Front-House-MCM05-NSK.sldprt | 67 KB |
| 213 | G2E180-EH03-01.sldprt | 136 KB |
| 214 | G36-10-01_G36.sldprt | 315 KB |
| 215 | GUIDE HOLDER PIN B.sldprt | 68.5 KB |
| 216 | GUIDE HOLDER PIN.sldprt | 67.5 KB |
| 217 | Greasing-Nipple-MCM05010H10K00-NSK_Greasing-Nipple-MCM05010H10K00-NSK.sldprt | 53 KB |
| 218 | Guide Chain Caterpillar.sldprt | 54.5 KB |
| 219 | Heater.sldasm | 136 KB |
| 220 | Hipla ThermoCouple.sldprt | 56 KB |
| 221 | Holder Sensor Bawah 2(Default).sldprt | 56 KB |
| 222 | Holder Sensor(Default).sldprt | 59.5 KB |
| 223 | Holder Sensor-1.sldasm | 114 KB |
| 224 | Holder Sensor-2.sldasm | 114 KB |
| 225 | Holder Sensor.sldasm | 114 KB |
| 226 | ILF22-MU.sldprt | 95.5 KB |
| 227 | ILF63-MU.sldprt | 237 KB |
| 228 | Insert Pin Monocarrier.sldprt | 52 KB |
| 229 | JA32-10-100.sldasm | 113 KB |
| 230 | JA32-10-100_JA-Body.sldprt | 60 KB |
| 231 | JA32-10-100_JA-Case.sldprt | 51.5 KB |
| 232 | JA32-10-100_JA-RodB.sldprt | 54.5 KB |
| 233 | Jaw inlet-02.sldprt | 56.5 KB |
| 234 | Jaw inlet.sldprt | 59 KB |
| 235 | Join Loader Fix 2.sldprt | 53 KB |
| 236 | Join Loader Fix.sldprt | 52.5 KB |
| 237 | L JOINT FRAME TO BASE.sldprt | 68 KB |
| 238 | LHBBW20.sldprt | 67.5 KB |
| 239 | Loader Fix 2.sldprt | 58 KB |
| 240 | Loader Fix 3.sldprt | 60 KB |
| 241 | Loader Fix.sldprt | 56.5 KB |
| 242 | Lock-Nut-WBK08L-01-NSK_Lock-Nut-WBK08L-01-NSK-1.sldasm | 114 KB |
| 243 | Lock-Nut-WBK08L-01-NSK_Lock-Nut-WBK08L-01-NSK.sldasm | 114 KB |
| 244 | Lock-Nut-WBK08L-01-NSK_Lock-Nut-WBK08L-01-NSK.sldprt | 56.5 KB |
| 245 | Locking Shaft Slider.sldprt | 56 KB |
| 246 | Lubrication-Unit-MCM05010H10K00-NSK_Lubrication-Unit-MCM05010H10K00-NSK.sldprt | 62.5 KB |
| 247 | MGGLB25-200-Cyl.sldasm | 114 KB |
| 248 | MGGLB25-200_MGGL-Rod.sldprt | 55.5 KB |
| 249 | MGGLB25-200_MGGL-RodCover.sldprt | 58.5 KB |
| 250 | MGGLB25-200_MGGL-Tube-HeadCover.sldprt | 57.5 KB |
| 251 | MGPL12-30-Z73(MGPL12-30-Z73-_flexible1).sldasm | 116 KB |
| 252 | MGPL12-30-Z73_MGPRod.sldprt | 63.5 KB |
| 253 | MGPL12-30-Z73_MGPTube.sldprt | 114 KB |
| 254 | MGPL12-30-Z73_Y5_Y6_Y7_Z7_Z8_.sldprt | 60 KB |
| 255 | MGPM20-150.sldasm | 111 KB |
| 256 | MGPM20-150_MGPRod.sldprt | 63.5 KB |
| 257 | MGPM20-150_MGPTube.sldprt | 100 KB |
| 258 | MHZ2-20D1-M9BWVL.sldasm | 117 KB |
| 259 | MHZ2-20D1-M9BWVL_F9_M9.sldprt | 93.5 KB |
| 260 | MHZ2-20D1-M9BWVL_MHZ2-Body.sldprt | 74.5 KB |
| 261 | MHZ2-20D1-M9BWVL_mhz2-prong.sldprt | 54.5 KB |
| 262 | MHZ2-20D1-M9N.sldasm | 117 KB |
| 263 | MHZ2-20D1-M9N_F9_M9.sldprt | 69.5 KB |
| 264 | MHZ2-20D1-M9N_MHZ2-Body.sldprt | 74.5 KB |
| 265 | MHZ2-20D1-M9N_mhz2-prong.sldprt | 54.5 KB |
| 266 | MHZ2-20D3.sldasm | 114 KB |
| 267 | MHZ2-20D3_MHZ2-Body.sldprt | 74.5 KB |
| 268 | MHZ2-20D3_mhz2-prong.sldprt | 56 KB |
| 269 | MLM14-1.sldasm | 111 KB |
| 270 | MLM14-2.sldasm | 111 KB |
| 271 | MLM14-3.sldasm | 111 KB |
| 272 | MLM14.sldasm | 111 KB |
| 273 | MLM14body.sldprt | 59 KB |
| 274 | Main Anti Heater.sldprt | 61.5 KB |
| 275 | Metal-Plate-MCM05010H10K00-NSK_Metal-Plate-MCM05010H10K00-NSK.sldprt | 63.5 KB |
| 276 | MirrorBase Conveyor.sldprt | 55.5 KB |
| 277 | MirrorBase Feeder(Default_As Machined_).sldprt | 177 KB |
| 278 | MirrorBase Slide Feeder.sldprt | 57 KB |
| 279 | MirrorBlock Conveyor.sldprt | 52.5 KB |
| 280 | MirrorBrecket Cyl Feeder.sldprt | 63.5 KB |
| 281 | MirrorBrecket Feeder 1.sldprt | 60 KB |
| 282 | MirrorBrecket Rail.sldprt | 56.5 KB |
| 283 | MirrorCG1BN40-350.sldasm | 116 KB |
| 284 | MirrorCG1BN40-350_CG12054Tube-HeadCover.sldprt | 62.5 KB |
| 285 | MirrorCG1BN40-350_CG1X8024XRodCover.sldprt | 58 KB |
| 286 | MirrorCG1BN40-350_CG1X8024XRods.sldprt | 56 KB |
| 287 | MirrorCG1BN40-350_Nuts.sldprt | 60 KB |
| 288 | MirrorCPND25_8_10.sldasm | 115 KB |
| 289 | MirrorCarrier PArt(Default).sldprt | 54.5 KB |
| 290 | MirrorCarrier Part-2.sldprt | 55 KB |
| 291 | MirrorCarrier Part-3.sldprt | 54 KB |
| 292 | MirrorCarrier Part.sldasm | 136 KB |
| 293 | MirrorDB_CPND25_8_10.sldprt | 65.5 KB |
| 294 | MirrorDoor Panel Utama.sldprt | 102 KB |
| 295 | MirrorFeeder System (revisi).sldasm | 206 KB |
| 296 | MirrorFoam Feeder.sldprt | 53.5 KB |
| 297 | MirrorGude Round BElt.sldprt | 58.5 KB |
| 298 | MirrorHolder Sensor Feeder.sldprt | 55 KB |
| 299 | MirrorHolder Slider Feeder.sldprt | 64 KB |
| 300 | MirrorLoadder-Flange(Default).sldprt | 55.5 KB |
| 301 | MirrorLoader 1.sldprt | 61.5 KB |
| 302 | MirrorLoader Part-1(Default).sldprt | 79.5 KB |
| 303 | MirrorLoader Part-2(Default).sldprt | 80.5 KB |
| 304 | MirrorM2_5.sldprt | 56 KB |
| 305 | MirrorMHZ2-20D3_mhz2-prong.sldprt | 56.5 KB |
| 306 | MirrorMSS315_402WJ-1.sldprt | 60.5 KB |
| 307 | MirrorMSS315_402WJ-2.sldprt | 109 KB |
| 308 | MirrorMSS315_402WJ.sldasm | 111 KB |
| 309 | MirrorOMRON-E3T_ST21 v22.sldasm | 113 KB |
| 310 | MirrorOMRON-E3T_ST21_E3T_ST21_D.sldprt | 109 KB |
| 311 | MirrorOMRON-E3T_ST21_E3T_ST21_L.sldprt | 87.5 KB |
| 312 | MirrorParts 121.80.sldprt | 51.5 KB |
| 313 | MirrorPick Up(Default).sldprt | 55 KB |
| 314 | MirrorPlotting Joint.sldprt | 52.5 KB |
| 315 | MirrorRail.sldprt | 69 KB |
| 316 | MirrorShaft Feeder.sldprt | 52 KB |
| 317 | MirrorSpacer Feeder.sldprt | 56 KB |
| 318 | Mirrorlmuf_n16_2_03.sldprt | 57 KB |
| 319 | Monocarrier-MCM05010H10K00_MC-CV05010-00-NSK-1.sldasm | 135 KB |
| 320 | Monocarrier-MCM05010H10K00_MC-CV05010-00-NSK.sldasm | 135 KB |
| 321 | Motor super line SF-JRV-2P1HP.sldprt | 159 KB |
| 322 | OM-5IK40GN-CW2TE 5GN180RH-1.sldasm | 113 KB |
| 323 | OM-5IK40GN-CW2TE 5GN180RH.sldasm | 113 KB |
| 324 | OM-5IK40GN-CW2TE 5GN180RH_330-1.sldasm | 111 KB |
| 325 | OM-5IK40GN-CW2TE 5GN180RH_330.sldasm | 111 KB |
| 326 | OM-5IK40GN-CW2TE 5GN180RH_40GNWT_Motor.sldprt | 77.5 KB |
| 327 | OM-5IK40GN-CW2TE 5GN180RH_5GN3RH-1.sldasm | 111 KB |
| 328 | OM-5IK40GN-CW2TE 5GN180RH_5GN3RH.sldasm | 111 KB |
| 329 | OM-5IK40GN-CW2TE 5GN180RH_5GNRH_0__Gearhead.sldprt | 80 KB |
| 330 | OM-5IK40GN-CW2TE 5GN180RH_5IK40GN_AW2TU__0_0-1.sldasm | 114 KB |
| 331 | OM-5IK40GN-CW2TE 5GN180RH_5IK40GN_AW2TU__0_0.sldasm | 114 KB |
| 332 | OM-5IK40GN-CW2TE 5GN180RH_Gearhead H-1.sldasm | 111 KB |
| 333 | OM-5IK40GN-CW2TE 5GN180RH_Gearhead H.sldasm | 111 KB |
| 334 | OM-5IK40GN-CW2TE 5GN180RH_Terminal_Box.sldprt | 85.5 KB |
| 335 | OM-MB840-D (Centrifugal Blowers),FGB8 (Finger Guard),PAS4B (Mounting Bracket),FD8 (Duct Joints).sldasm | 127 KB |
| 336 | OM-MB840-D (Centrifugal Blowers),FGB8 (Finger Guard),PAS4B (Mounting Bracket),FD8 (Duct Joints)_Duct Joint.sldprt | 131 KB |
| 337 | OM-MB840-D (Centrifugal Blowers),FGB8 (Finger Guard),PAS4B (Mounting Bracket),FD8 (Duct Joints)_E062.sldprt | 315 KB |
| 338 | OM-MB840-D (Centrifugal Blowers),FGB8 (Finger Guard),PAS4B (Mounting Bracket),FD8 (Duct Joints)_Finger Guard(Centrigal).sldprt | 106 KB |
| 339 | OM-MB840-D (Centrifugal Blowers),FGB8 (Finger Guard),PAS4B (Mounting Bracket),FD8 (Duct Joints)_Mounting Bracket(Fan).sldprt | 101 KB |
| 340 | OMRON-E3T_ST21 v2-1.sldasm | 112 KB |
| 341 | OMRON-E3T_ST21 v2-2.sldasm | 112 KB |
| 342 | OMRON-E3T_ST21 v2-3.sldasm | 112 KB |
| 343 | OMRON-E3T_ST21 v2-4.sldasm | 112 KB |
| 344 | OMRON-E3T_ST21 v2.sldasm | 112 KB |
| 345 | OMRON-E3T_ST21_E3T_ST21_D.sldprt | 109 KB |
| 346 | OMRON-E3T_ST21_E3T_ST21_L.sldprt | 87 KB |
| 347 | Oriental motor 5IK40GN-SW2.sldprt | 57 KB |
| 348 | Outlet chutter.sldprt | 82.5 KB |
| 349 | Outlet slide guide auto spray.sldprt | 60.5 KB |
| 350 | Output Feeder.sldasm | 148 KB |
| 351 | Panel Control.sldasm | 112 KB |
| 352 | Part Shaft.sldprt | 52.5 KB |
| 353 | Parts 121.80 jaw-01.sldprt | 58.5 KB |
| 354 | Parts 121.80.sldprt | 51 KB |
| 355 | Pillow Blockds (DIY)-1.sldasm | 124 KB |
| 356 | Pillow Blockds (DIY).sldasm | 124 KB |
| 357 | Pillow Blockds Adjusment (DIY)-1.sldasm | 128 KB |
| 358 | Pillow Blockds Adjusment (DIY).sldasm | 128 KB |
| 359 | Pipe_1-ASM-Main Base System-001.sldasm | 136 KB |
| 360 | Pipe_6-ASM-Drier Booth-1.sldasm | 125 KB |
| 361 | Pipe_6-ASM-Drier Booth-2.sldasm | 125 KB |
| 362 | Pipe_6-ASM-Drier Booth-3.sldasm | 125 KB |
| 363 | Pipe_6-ASM-Drier Booth-4.sldasm | 125 KB |
| 364 | Pipe_6-ASM-Drier Booth-5.sldasm | 125 KB |
| 365 | Pipe_6-ASM-Drier Booth-6.sldasm | 125 KB |
| 366 | Pipe_6-ASM-Drier Booth-7.sldasm | 125 KB |
| 367 | Pipe_6-ASM-Drier Booth-8.sldasm | 125 KB |
| 368 | Pipe_6-ASM-Drier Booth-9.sldasm | 125 KB |
| 369 | Pipe_6-ASM-Drier Booth.sldasm | 125 KB |
| 370 | Polybox rabbit 6033.sldprt | 249 KB |
| 371 | Rail-MCM05010H10K00-NSK_Rail-MCM05010H10K00-NSK.sldprt | 74.5 KB |
| 372 | Roller Chain Caterpillar(Default).sldprt | 56 KB |
| 373 | SPRAY GUN MEIJI A110.sldprt | 269 KB |
| 374 | Screw-MCM05010H10K00-NSK_Screw-MCM05010H-NSK.sldprt | 56.5 KB |
| 375 | Shaft Catterpilar.sldprt | 53 KB |
| 376 | Shaft Slider.sldprt | 51.5 KB |
| 377 | Shaft Sprocket.sldprt | 54.5 KB |
| 378 | Shaft Support Slider(revisi 2).sldprt | 52 KB |
| 379 | Slider-MCM05010H10K00-NSK_Slider-MCM05010H10K00-NSK-1.sldasm | 141 KB |
| 380 | Slider-MCM05010H10K00-NSK_Slider-MCM05010H10K00-NSK.sldasm | 141 KB |
| 381 | Slider-MCM05010H10K00-NSK_Slider-MCM05010H10K00-NSK.sldprt | 73.5 KB |
| 382 | Spacer CAterpillar.sldprt | 53.5 KB |
| 383 | Spacer.sldprt | 52.5 KB |
| 384 | Sparator part autospray.sldprt | 57.5 KB |
| 385 | Spray gun RAL-100 bracket linku-01.sldprt | 61 KB |
| 386 | Spray gun RAL-100 bracket linku.sldprt | 61 KB |
| 387 | Spray gun RAL-100 bracket.sldprt | 56 KB |
| 388 | Spray gun bracket slide and motor drive.sldprt | 65.5 KB |
| 389 | Sprocket holder pipe.sldprt | 130 KB |
| 390 | Stand Guide Chain Caterpillar(revisi 2).sldprt | 64 KB |
| 391 | Stand Holder Sensor(Default).sldprt | 58.5 KB |
| 392 | Stand panel control auto spray.sldprt | 63 KB |
| 393 | Stop-Screw-WBK-M3x3-NSK_Stop-Screw-WBK-M3x3-NSK.sldprt | 55 KB |
| 394 | Stopper rail.sldprt | 54.5 KB |
| 395 | Support Catterpilar.sldprt | 52 KB |
| 396 | Support Loader Fix.sldprt | 53.5 KB |
| 397 | Support Shaft.sldprt | 59 KB |
| 398 | TTPA32T5100_A_H10.sldprt | 153 KB |
| 399 | Top-Cover-MC-CV05010-01-NSK_Top-Cover-MC-CV05010-01-NSK.sldprt | 62 KB |
| 400 | Touch part(Default).sldprt | 55 KB |
| 401 | Tower lamp autospray.sldprt | 59 KB |
| 402 | Travel-Stopper-MCM05010H10K00-NSK_Travel-Stopper-MCM05010H10K00-NSK.sldprt | 52.5 KB |
| 403 | User Library-HC-KFS23.sldprt | 396 KB |
| 404 | VACUUM PUMP SC50.sldprt | 1.29 MB |
| 405 | VFS2200-5FZ-02N.sldasm | 116 KB |
| 406 | VFS2200-5FZ-02N_1017MAN-OPA.sldprt | 51 KB |
| 407 | VFS2200-5FZ-02N_VFS2000 Subbase.sldprt | 189 KB |
| 408 | VFS2200-5FZ-02N_VFS2000Body.sldprt | 72.5 KB |
| 409 | VFS2200-5FZ-02N_VFSCoil-1.sldasm | 112 KB |
| 410 | VFS2200-5FZ-02N_VFSCoil.sldasm | 112 KB |
| 411 | VFS2200-5FZ-02N_VFSCoil.sldprt | 54.5 KB |
| 412 | VV5FS2-01-083-02.sldasm | 159 KB |
| 413 | VV5FS2-01-083-02_MirrorVV5FS2End Plate1.sldprt | 62.5 KB |
| 414 | VV5FS2-01-083-02_VV5FS2End Plate.sldprt | 62 KB |
| 415 | VV5FS2-01-083-02_VV5FS2Manifold Block.sldprt | 59 KB |
| 416 | bracket guide pom.sldprt | 60 KB |
| 417 | c type hole use retaining ring_jis 35.sldprt | 55 KB |
| 418 | c type hole use retaining ring_jis(JIS B 2804 Hole use 55).sldprt | 55 KB |
| 419 | c type shaft use retaining ring_jis(JIS B 2804 Shaft use 60).sldprt | 56.5 KB |
| 420 | chain.sldprt | 71.5 KB |
| 421 | fin heater.sldprt | 85 KB |
| 422 | flange Blower.sldasm | 113 KB |
| 423 | flat washer narrow_am(B18.22M - Plain washer, 10 mm, narrow).sldprt | 52 KB |
| 424 | flat washer narrow_am(B18.22M - Plain washer, 8 mm, narrow).sldprt | 52 KB |
| 425 | guide chain feeder pipe.sldprt | 63 KB |
| 426 | guide chain rev 1.sldprt | 57.5 KB |
| 427 | heavy duty external retaining ring_am(PreviewCfg).sldprt | 56.5 KB |
| 428 | hex bolt gradeab_iso(PreviewCfg).sldprt | 61 KB |
| 429 | hex nut gradec_iso(Hexagon Nut ISO - 4034 - M6 - N).sldprt | 58.5 KB |
| 430 | hexagon nut style 1_ab_jis(JIS B 1181 Hexagon nut - style 1 A M10 - W --N).sldprt | 58.5 KB |
| 431 | hexagon nut style 1_ab_jis(JIS B 1181 Hexagon nut - style 1 A M8 - W --N).sldprt | 58.5 KB |
| 432 | outlet bracket cyl pick-up autospray(Default).sldprt | 55 KB |
| 433 | outlet shaft guide autospray.sldprt | 51 KB |
| 434 | pan cross head_am(B18.6.7M - M6 x 1.0 x 8 Type I Cross Recessed PHMS --8N).sldprt | 56.5 KB |
| 435 | pan head cross recess screw_iso(ISO 7045 - M6 x 20 - Z --- 20N).sldprt | 60.5 KB |
| 436 | pipe joint loading.sldprt | 51 KB |
| 437 | radial ball bearing_68_iso(PreviewCfg).sldprt | 88 KB |
| 438 | radial ball bearing_68_skf 6003.sldprt | 59.5 KB |
| 439 | reducer(REDUCER 4 x 3).sldprt | 56 KB |
| 440 | short pitch roller chain wheel_s_iso1 20A1.sldprt | 134 KB |
| 441 | socket countersunk head screw_am1.sldprt | 58 KB |
| 442 | socket head cap screw_iso(ISO 4762 M4 x 16 --- 16N).sldprt | 57 KB |
| 443 | socket head cap screw_iso(ISO 4762 M4 x 20 --- 20N).sldprt | 56.5 KB |
| 444 | socket head cap screw_iso(ISO 4762 M5 x 16 --- 16N).sldprt | 56.5 KB |
| 445 | socket head cap screw_iso(ISO 4762 M5 x 20 --- 20N).sldprt | 56.5 KB |
| 446 | socket head cap screw_iso(ISO 4762 M6 x 16 --- 16N).sldprt | 57 KB |
| 447 | socket head cap screw_iso(ISO 4762 M6 x 20 --- 20N).sldprt | 56.5 KB |
| 448 | socket head cap screw_iso(ISO 4762 M8 x 12 --- 12N).sldprt | 57 KB |
| 449 | socket head cap screw_iso(ISO 4762 M8 x 16 --- 16N).sldprt | 57 KB |
| 450 | socket head cap screw_iso(ISO 4762 M8 x 20 --- 20N).sldprt | 57 KB |
| 451 | stand sensor pin.sldprt | 62.5 KB |
| 452 | straight tee inch(Tee Inch 2 Sch40).sldprt | 53.5 KB |
| 453 | transmission roller chain sprocket_s_jis(JIS B 1802 Sprocket 50, N18 S --18SB40H20L15N).sldprt | 149 KB |
| 454 | welding neck flange(WNeck Flange 150-NPS1.25).sldprt | 54.5 KB |
| 455 | welding neck flange(WNeck Flange 150-NPS1.5).sldprt | 54.5 KB |
免责申明:
本网站模型由用户自行上传，如权利人发现存在误传其作品情形，请及时与本站联系。
立即下载
此图纸下载需要49金币
图纸ID：627425
文件大小：23.42M
软件版本：SOLIDWORKS 2014
图纸格式：sldprt,sldasm
参数/编辑：可修改，包括参数
上传时间：2024-12-05
图纸介绍：
发布者
阿仔
作品: 19
粉丝: 2
提示
×
下载该图档需要消耗49金币！
确认下载
客服
签到
分享
