微信扫码登录
作者其它图纸
查看更多
猜你喜欢
活动福利+发布图纸
登录注册
钻床.3（ID:632481）
| # | 文件名称 | 文件大小 |
|---|---|---|
| 1 | 13mm Drillbit.SLDPRT | 222 KB |
| 2 | ANGLE CALIP.sldprt | 2.23 MB |
| 3 | ARBOR MT2.sldprt | 47.5 KB |
| 4 | AUTO FEED DIRIVE.sldasm | 123 KB |
| 5 | AUTO FEED GEAR BOX.sldasm | 184 KB |
| 6 | BALL -4.7.sldprt | 43 KB |
| 7 | BASE ASSEMBLY.sldasm | 112 KB |
| 8 | BASE.sldprt | 473 KB |
| 9 | BEARING COVER _BLIND.sldprt | 54.5 KB |
| 10 | BEARING COVER.sldprt | 46 KB |
| 11 | BELT COVER.sldprt | 100 KB |
| 12 | BIT CHUCK.sldprt | 259 KB |
| 13 | CALIBRATED SCALE.sldprt | 1.91 MB |
| 14 | CAM SELECTION.sldprt | 58.5 KB |
| 15 | COLUMN ASSEMBLY.sldasm | 119 KB |
| 16 | COLUMN.sldprt | 43.5 KB |
| 17 | COMPRESS SPRING 13.4-2.5-16.sldprt | 92.5 KB |
| 18 | COMPRESS SPRING 15.5-1.6-26.sldprt | 101 KB |
| 19 | COMPRESS SPRING 19-1.6-16.sldprt | 107 KB |
| 20 | COMPRESS SPRING 4.6-0.8-9.sldprt | 87 KB |
| 21 | COMPRESS SPRING 53.5-4-20.sldprt | 78.5 KB |
| 22 | COMPRESS SPRING 7-0.6-6.7.sldprt | 65.5 KB |
| 23 | COVER ASSEMBLY.sldasm | 124 KB |
| 24 | COVER PULLEY.sldprt | 46.5 KB |
| 25 | CRANK HANDLE.sldprt | 94 KB |
| 26 | DEEP CONTROL LOCK.sldprt | 45.5 KB |
| 27 | DEEP CONTROL RING.sldprt | 49 KB |
| 28 | DIN 1587 - M10 x 1.5_DRILL M4.sldprt | 52 KB |
| 29 | DIN 319 C 32 FS.sldprt | 44 KB |
| 30 | DIN 319 C 50 FS.sldprt | 44 KB |
| 31 | DIN 427 - M4 x 10 - glz.sldprt | 47 KB |
| 32 | DIN 427 - M8 x 16 - glz.sldprt | 47 KB |
| 33 | DIN 471 - 14x1.sldprt | 48.5 KB |
| 34 | DIN 471 - 15x1.sldprt | 48.5 KB |
| 35 | DIN 471 - 17x1.sldprt | 48.5 KB |
| 36 | DIN 471 - 38x1.75.sldprt | 48.5 KB |
| 37 | DIN 5406 - MB5.sldprt | 80.5 KB |
| 38 | DIN 6885 - A 4 x 4 x 14.sldprt | 45.5 KB |
| 39 | DIN 6885 - A 5 x 5 x 12.sldprt | 45.5 KB |
| 40 | DIN 6885 - A 5 x 5 x 40.sldprt | 45.5 KB |
| 41 | DIN 6912 - M4 x 42 CUT.sldprt | 49 KB |
| 42 | DIN 981 - KM 5.sldprt | 57.5 KB |
| 43 | DIN 981 - KM 6.sldprt | 57 KB |
| 44 | DRILL PRESS MACHHINE.iam.SLDASM | 15.4 MB |
| 45 | DRILL PRESS MACHHINE.iam.err | 8.92 KB |
| 46 | DRIVE CLUTCH.sldprt | 244 KB |
| 47 | DRIVE SLEEVE.sldprt | 59 KB |
| 48 | DRIVEN CLUTCH.sldprt | 146 KB |
| 49 | ELEVATION LIMIT.sldasm | 102 KB |
| 50 | EXTERNAL SNAP RING.sldprt | 45.5 KB |
| 51 | FEED ASSEMBLY.sldasm | 126 KB |
| 52 | FEED HANDLE SHAFT.sldprt | 48 KB |
| 53 | FEED HUB ASSEMBLY.sldasm | 156 KB |
| 54 | FEED HUB.sldprt | 89.5 KB |
| 55 | FEED SHAFT.sldprt | 174 KB |
| 56 | GEAR BOX COVER.sldprt | 110 KB |
| 57 | GEAR BOX.sldprt | 164 KB |
| 58 | GEAR SHAFT.sldprt | 115 KB |
| 59 | HARDEN PIN 5 L 38.sldprt | 43.5 KB |
| 60 | HEAD ASSEBLY.sldasm | 114 KB |
| 61 | HEAD.sldprt | 448 KB |
| 62 | HINGE.sldasm | 102 KB |
| 63 | HINGE_1.sldasm | 102 KB |
| 64 | HINGE_1.sldprt | 53.5 KB |
| 65 | HINGE_2.sldprt | 52.5 KB |
| 66 | HINGE_PIN.sldprt | 43 KB |
| 67 | INPUT SHAFT SUPPORT.sldprt | 56 KB |
| 68 | INPUT SHAFT.sldprt | 50 KB |
| 69 | INTERMEDIATE PULLEY 2 STEP.sldprt | 52 KB |
| 70 | INTERMEDIATE PULLEY 3 STEP.sldprt | 67 KB |
| 71 | INTERMEDIATE PULLEYS ASSEMBLY.sldasm | 142 KB |
| 72 | ISO 15973 - 4.8-6.5 - AIA-St.sldprt | 46.5 KB |
| 73 | ISO 2339 - A - 4 x 26.sldprt | 44 KB |
| 74 | ISO 2339 - A - 5 x 30.sldprt | 44 KB |
| 75 | ISO 3601-1 - B 0600 G(1).sldprt | 43.5 KB |
| 76 | ISO 4014 - M10 x 60-bl.sldprt | 50.5 KB |
| 77 | ISO 4017 - M12 x 100-bl.sldprt | 50.5 KB |
| 78 | ISO 4017 - M12 x 80-bl.sldprt | 50.5 KB |
| 79 | ISO 4017 - M8 x 16-glz.sldprt | 50.5 KB |
| 80 | ISO 4029 - M12 x 16 - bl.sldprt | 49 KB |
| 81 | ISO 4029 - M12 x 35 - bl.sldprt | 49 KB |
| 82 | ISO 4029 - M5 x 10 - bl.sldprt | 49 KB |
| 83 | ISO 4029 - M5 x 16 - bl.sldprt | 49 KB |
| 84 | ISO 4029 - M6 x 10 - bl.sldprt | 48.5 KB |
| 85 | ISO 4029 - M6 x 6 - bl.sldprt | 48.5 KB |
| 86 | ISO 4029 - M8 x 10 - bl.sldprt | 49 KB |
| 87 | ISO 4032 - M10 - glz.sldprt | 48.5 KB |
| 88 | ISO 4032 - M12 - glz.sldprt | 48.5 KB |
| 89 | ISO 4032 - M16 - glz.sldprt | 48.5 KB |
| 90 | ISO 4032 - M6 - glz.sldprt | 48.5 KB |
| 91 | ISO 4035 - M14 - glz.sldprt | 48.5 KB |
| 92 | ISO 4762 - M4 x 10 - bl.sldprt | 50.5 KB |
| 93 | ISO 4762 - M5 x 16 - bl.sldprt | 50.5 KB |
| 94 | ISO 4762 - M6 x 16 - bl.sldprt | 50.5 KB |
| 95 | ISO 4762 - M6 x 40_CUT.sldprt | 50.5 KB |
| 96 | ISO 4762 - M6 x 60 - bl.sldprt | 50.5 KB |
| 97 | ISO 7045 - M3 x 5 - 4.8 - HISO.sldprt | 58.5 KB |
| 98 | ISO 7045 - M4 x 10 - 4.8 - HISO.sldprt | 60.5 KB |
| 99 | ISO 7045 - M4 x 5 - 4.8 - HISO.sldprt | 60 KB |
| 100 | ISO 7045 - M8 x 14 - 4.8 - HISO.sldprt | 68.5 KB |
| 101 | ISO 7046-1 - M4 x 10 - 4.8 - H - glz.sldprt | 60.5 KB |
| 102 | ISO 7046-1 - M4 x 35 - 4.8 - H - glz.sldprt | 60.5 KB |
| 103 | ISO 7089 - 10 - 140 HV - glz.sldprt | 44 KB |
| 104 | ISO 7089 - 12 - 140 HV - bl.sldprt | 44 KB |
| 105 | ISO 7089 - 16 - 140 HV - glz.sldprt | 44 KB |
| 106 | ISO 7089 - 5 - 140 HV - glz.sldprt | 44 KB |
| 107 | ISO 7089 - 6 - 140 HV - glz.sldprt | 44 KB |
| 108 | ISO 7089 - 8 - 140 HV - glz.sldprt | 44 KB |
| 109 | ISO 7436 - M10 x 30 - bl.sldprt | 47 KB |
| 110 | ISO 8752 - 3 x 8 - St.sldprt | 47 KB |
| 111 | ISO 8752 - 6 x 20 - St.sldprt | 47 KB |
| 112 | ISO 8752 - 6 x 26 - St.sldprt | 47 KB |
| 113 | ISO 8752 - 8 x 16 - St.sldprt | 47 KB |
| 114 | KNURLED PIN M5 L15.sldprt | 538 KB |
| 115 | LOCATOR PIN.sldprt | 44 KB |
| 116 | LOCK HANDLE.sldprt | 47 KB |
| 117 | LOWER COVER_FORMING.sldprt | 88 KB |
| 118 | MOTOR ASSEMBLY.sldasm | 120 KB |
| 119 | MOTOR BASE.sldprt | 101 KB |
| 120 | MOTOR PULLEY.sldprt | 55.5 KB |
| 121 | MOTOR.sldprt | 68.5 KB |
| 122 | NAME PLATE_3D.sldprt | 49.5 KB |
| 123 | Nut GB 806 M8.sldprt | 46 KB |
| 124 | OIL CUP 1_16.sldprt | 45 KB |
| 125 | OIL CUP 1_8.sldprt | 48 KB |
| 126 | PINION GEAR( m=2).sldprt | 171 KB |
| 127 | PIVOT.sldprt | 70 KB |
| 128 | POINTER-A.sldprt | 51.5 KB |
| 129 | POINTER-F.sldprt | 57 KB |
| 130 | POINTER-H.sldprt | 59 KB |
| 131 | PULLEY SHAFT.sldprt | 51 KB |
| 132 | PUSH BUTTON BH17015.sldasm | 103 KB |
| 133 | PUSH BUTTON BODY.sldprt | 102 KB |
| 134 | PUSH BUTTON COVER.sldprt | 157 KB |
| 135 | QUILL.sldprt | 94.5 KB |
| 136 | RACK RING.sldprt | 54 KB |
| 137 | RACK.sldprt | 157 KB |
| 138 | ROUND BELT 6.sldprt | 43.5 KB |
| 139 | ROUND BELT 8.sldprt | 44 KB |
| 140 | ROUND PULLEY 2 STEPS WITH SHAFT.sldprt | 57.5 KB |
| 141 | ROUND PULLEY 2 STEPS.sldprt | 57.5 KB |
| 142 | ROUND PULLEY 3 STEPS.sldprt | 61.5 KB |
| 143 | Rivet GB_T 827-1986-1.6 X 3.sldprt | 55.5 KB |
| 144 | SCRAP WOOD.sldprt | 45 KB |
| 145 | SELECT MODE COVER.sldprt | 49 KB |
| 146 | SELECTION LEVER.sldprt | 1.7 MB |
| 147 | SET PIN 6 L36.sldprt | 46.5 KB |
| 148 | SLIDE MOTOR BAR (LONG).sldprt | 47.5 KB |
| 149 | SLIDE MOTOR BAR (SHORT).sldprt | 45.5 KB |
| 150 | SPACER D 15 22 L 13.sldprt | 45.5 KB |
| 151 | SPACER D 15-18 L 3.5.sldprt | 45.5 KB |
| 152 | SPACER D 30-34 L25.sldprt | 45.5 KB |
| 153 | SPACER D 32 L 8.sldprt | 45 KB |
| 154 | SPACER D 45.2-54.5 L1.sldprt | 45.5 KB |
| 155 | SPECIAL KEY A 10 x 8 x 40.sldprt | 49 KB |
| 156 | SPECIAL KEY B 12x8x19.sldprt | 51.5 KB |
| 157 | SPECIAL NUT M15.sldprt | 48.5 KB |
| 158 | SPECIAL NUT M22.sldprt | 48.5 KB |
| 159 | SPECIAL PIN 6.sldprt | 46 KB |
| 160 | SPECIAL SCREW M22.sldprt | 49 KB |
| 161 | SPECIAL SCREW M6.sldprt | 51 KB |
| 162 | SPINDLE ASSEMBLY.sldasm | 111 KB |
| 163 | SPINDLE PULLEY ASSEMBLY.sldasm | 123 KB |
| 164 | SPINDLE ROUND PULLEY 3 STEPS.sldprt | 59.5 KB |
| 165 | SPINDLE V PULLEY 3 STEPS.sldprt | 56.5 KB |
| 166 | SPINDLE.sldprt | 91 KB |
| 167 | SPIRAL SPRING.sldprt | 74.5 KB |
| 168 | SPRING COVER ASS.sldasm | 109 KB |
| 169 | SPRING COVER.sldprt | 134 KB |
| 170 | STUD M16 L 85.sldprt | 43.5 KB |
| 171 | SUPPORT PLATE A.sldprt | 47.5 KB |
| 172 | SUPPORT PLATE B.sldprt | 50.5 KB |
| 173 | SWING HANDLE.sldprt | 95 KB |
| 174 | SWING PLATE.sldprt | 46 KB |
| 175 | SWING SCREW.sldprt | 47.5 KB |
| 176 | TABLE BRACKET.sldprt | 228 KB |
| 177 | TENSION BELT.sldasm | 111 KB |
| 178 | TENSION HANDLE SHAFT.sldprt | 45.5 KB |
| 179 | TENSION NUT M25.sldprt | 71.5 KB |
| 180 | TENSION SHAFT.sldprt | 49 KB |
| 181 | TWIST DRILL 8.sldprt | 72.5 KB |
| 182 | UPPER COVER_FORMING.sldprt | 82.5 KB |
| 183 | V BELT A31.sldprt | 48.5 KB |
| 184 | V BELT A38.sldprt | 48.5 KB |
| 185 | WASHER 38-70-2.sldprt | 43.5 KB |
| 186 | WING SREW M10.sldasm | 103 KB |
| 187 | WORK TABLE.sldprt | 123 KB |
| 188 | WORKPIECE.sldprt | 45 KB |
| 189 | WORM (m=2.5).sldprt | 113 KB |
| 190 | WORM PINION (m=2).sldprt | 63 KB |
| 191 | WORM SMALL (m=1.8).sldprt | 138 KB |
| 192 | WORM WHEEL m1.5.sldprt | 112 KB |
| 193 | snr_51101_1.sldasm | 102 KB |
| 194 | snr_51101_1_01.sldprt | 48 KB |
| 195 | snr_51101_1_02.sldprt | 46 KB |
| 196 | snr_51101_1_03.sldprt | 47 KB |
| 197 | snr_51105_2.sldasm | 102 KB |
| 198 | snr_51105_2_01.sldprt | 61.5 KB |
| 199 | snr_51105_2_02.sldprt | 46 KB |
| 200 | snr_51105_2_03.sldprt | 47 KB |
| 201 | snr_51106_2.sldasm | 102 KB |
| 202 | snr_51106_2_01.sldprt | 65.5 KB |
| 203 | snr_51106_2_02.sldprt | 46.5 KB |
| 204 | snr_51106_2_03.sldprt | 47 KB |
| 205 | snr_6002zz_1.sldasm | 105 KB |
| 206 | snr_6002zz_1_01.sldprt | 51 KB |
| 207 | snr_6002zz_1_02.sldprt | 51 KB |
| 208 | snr_6002zz_1_03.sldprt | 48 KB |
| 209 | snr_6002zz_1_04.sldprt | 47.5 KB |
| 210 | snr_6002zz_1_05.sldprt | 47.5 KB |
| 211 | snr_6005zz_1.sldasm | 105 KB |
| 212 | snr_6005zz_1_01.sldprt | 51 KB |
| 213 | snr_6005zz_1_02.sldprt | 51 KB |
| 214 | snr_6005zz_1_03.sldprt | 48 KB |
| 215 | snr_6005zz_1_04.sldprt | 47.5 KB |
| 216 | snr_6005zz_1_05.sldprt | 47.5 KB |
| 217 | snr_6006zz_1.sldasm | 105 KB |
| 218 | snr_6006zz_1_01.sldprt | 51 KB |
| 219 | snr_6006zz_1_02.sldprt | 51 KB |
| 220 | snr_6006zz_1_03.sldprt | 48 KB |
| 221 | snr_6006zz_1_04.sldprt | 47.5 KB |
| 222 | snr_6006zz_1_05.sldprt | 47.5 KB |
| 223 | snr_6203zz_1.sldasm | 105 KB |
| 224 | snr_6203zz_1_01.sldprt | 51 KB |
| 225 | snr_6203zz_1_02.sldprt | 51 KB |
| 226 | snr_6203zz_1_03.sldprt | 48 KB |
| 227 | snr_6203zz_1_04.sldprt | 48 KB |
| 228 | snr_6203zz_1_05.sldprt | 47.5 KB |
| 229 | snr_6205zz_1.sldasm | 105 KB |
| 230 | snr_6205zz_1_01.sldprt | 51 KB |
| 231 | snr_6205zz_1_02.sldprt | 51 KB |
| 232 | snr_6205zz_1_03.sldprt | 48 KB |
| 233 | snr_6205zz_1_04.sldprt | 47.5 KB |
| 234 | snr_6205zz_1_05.sldprt | 47.5 KB |
| 235 | snr_6206nr_2.sldasm | 103 KB |
| 236 | snr_6206nr_2_01.sldprt | 48.5 KB |
| 237 | snr_6206nr_2_02.sldprt | 54.5 KB |
| 238 | snr_6206nr_2_03.sldprt | 47.5 KB |
| 239 | snr_6206nr_2_04.sldprt | 51 KB |
| 240 | snr_6206zz_2.sldasm | 105 KB |
| 241 | snr_6206zz_2_01.sldprt | 51 KB |
| 242 | snr_6206zz_2_02.sldprt | 51 KB |
| 243 | snr_6206zz_2_03.sldprt | 54.5 KB |
| 244 | snr_6206zz_2_04.sldprt | 47.5 KB |
| 245 | snr_6206zz_2_05.sldprt | 47.5 KB |
免责申明:
本网站模型由用户自行上传，如权利人发现存在误传其作品情形，请及时与本站联系。
立即下载
此图纸下载需要150金币
图纸ID：632481
文件大小：27.44M
软件版本：SOLIDWORKS 2015
图纸格式：sldprt,sldasm
参数/编辑：可修改，包括参数
上传时间：2024-12-17
图纸介绍：
发布者
屿双网aevv
作品: 2826
粉丝: 16
![HN-300T三轴车床数控系统[HN-300T]](https://yushuangwang2.oss-accelerate.aliyuncs.com/fileimg/m67bada957b60c/01_home.jpg)
提示
×
下载该图档需要消耗150金币！
确认下载
客服
签到
分享
