非标自动化设备【A91】_STEP,SOLIDWORKS_模型图纸下载

首页

图库

课设毕设

资料库

工程师

非标自动化设备【A91】（ID:558951）

机械设备 / 智能装置 / 非标自动化设备【A91】

平面图

3D视图

文件列表

屿双网

#	文件名称	文件大小
1	15DEFAU0124159286938.sldprt	110 KB
2	15DEFAU1123721318928.sldasm	258 KB
3	2671-000-v00-Kalibriermaschine.sldprt	3.61 MB
4	40515 BALLUFF C21BE300VY150F.sldprt	113 KB
5	7011-00-001_Default_As Machined_.sldprt	627 KB
6	7011-00-002_Default_As Machined_.sldprt	1.02 MB
7	7011-00-003_Default_As Machined_.sldprt	144 KB
8	7011-00-003_Default_As Welded_.sldprt	122 KB
9	7011-00-004.sldprt	89 KB
10	7011-00-005_Default_As Machined_.sldprt	195 KB
11	7011-00-006_Default_As Machined_.sldprt	123 KB
12	7011-00-007_Default_As Machined_.sldprt	152 KB
13	7011-00-008_Default_As Machined_.sldprt	113 KB
14	7011-00-009.sldprt	90.5 KB
15	7011-00-010_Default_As Machined_.sldprt	132 KB
16	7011-00-011_Default_As Machined_.sldprt	123 KB
17	7011-01-001_Default_As Machined_.sldprt	151 KB
18	7011-01-002.sldprt	107 KB
19	7011-01-003.sldprt	91 KB
20	7011-01-004.sldprt	89 KB
21	7011-01-005.sldprt	89.5 KB
22	7011-01-008.sldprt	96.5 KB
23	7011-01-009.sldprt	93.5 KB
24	7011-01-010.sldprt	104 KB
25	7011-01-011.sldprt	90 KB
26	7011-01-012.sldprt	89.5 KB
27	7011-01-013.sldprt	89.5 KB
28	7011-01-014.sldprt	113 KB
29	7011-01-015.sldprt	97.5 KB
30	7011-01-023.sldprt	86.5 KB
31	7011-01-024.sldprt	98 KB
32	7011-01-025.sldprt	87.5 KB
33	7011-01-026.sldprt	93 KB
34	7011-01-1003.sldprt	88 KB
35	7011-01-1005.sldprt	88.5 KB
36	7011-01-800_4 MAT AT WRAP SUPPRESSED.sldasm	2.15 MB
37	7011-02-001_Default_As Machined_.sldprt	113 KB
38	7011-02-002.sldprt	125 KB
39	7011-02-003.sldprt	88 KB
40	7011-02-004.sldprt	90 KB
41	7011-02-005.sldprt	94 KB
42	7011-02-006.sldprt	94.5 KB
43	7011-02-007.sldprt	88 KB
44	7011-02-010.sldprt	87.5 KB
45	7011-02-011.sldprt	89 KB
46	7011-02-012.sldprt	87.5 KB
47	7011-02-014.sldprt	89.5 KB
48	7011-02-800_LOAD POSITION, FRONT 3.7-4.7 FASTENERS SURPRESSED.sldasm	689 KB
49	7011-03 LEFT UPPER FRONT 3.7-4.7 TOOLING_full wrap round.sldasm	2.72 MB
50	7011-03 RIGHT UPPER FRONT 3.7-4.7 TOOLING_pre-wrap oval.sldasm	581 KB
51	7011-03-001.sldprt	141 KB
52	7011-03-002.sldprt	120 KB
53	7011-03-003.sldprt	109 KB
54	7011-03-004.sldprt	96.5 KB
55	7011-03-005.sldprt	96 KB
56	7011-03-006.sldprt	120 KB
57	7011-03-007_Default_As Machined_.sldprt	107 KB
58	7011-03-008.sldprt	146 KB
59	7011-03-009.sldprt	91.5 KB
60	7011-03-010.sldprt	148 KB
61	7011-03-011.sldprt	88 KB
62	7011-03-012.sldprt	96.5 KB
63	7011-03-013.sldprt	90 KB
64	7011-03-014.sldprt	90.5 KB
65	7011-03-1001.sldprt	99.5 KB
66	7011-03-1002.sldprt	112 KB
67	7011-03-1003.sldprt	88.5 KB
68	7011-03-1004.sldprt	100 KB
69	7011-03-1005.sldprt	123 KB
70	7011-03-1006.sldprt	117 KB
71	7011-03-1007.sldprt	101 KB
72	7011-03-1008.sldprt	142 KB
73	7011-03-1009.sldprt	101 KB
74	7011-03-1010.sldprt	145 KB
75	7011-03-1011.sldprt	137 KB
76	7011-03-1012.sldprt	106 KB
77	7011-03-1025.sldprt	87 KB
78	7011-03-800_FULL WRAP DELTA FASTENERS SUPPRESSED.sldasm	4.02 MB
79	7011-04 ROUND STUFF TOOLING.sldasm	1.35 MB
80	7011-04-001.sldprt	118 KB
81	7011-04-002.sldprt	91 KB
82	7011-04-003.sldprt	170 KB
83	7011-04-004.sldprt	109 KB
84	7011-04-005.sldprt	125 KB
85	7011-04-006.sldprt	87.5 KB
86	7011-04-007.sldprt	105 KB
87	7011-04-008_Default_As Machined_.sldprt	107 KB
88	7011-04-009 REV A.sldprt	151 KB
89	7011-04-010 REVA.sldprt	112 KB
90	7011-04-011.sldprt	90 KB
91	7011-04-012.sldprt	118 KB
92	7011-04-013 REVA.sldprt	112 KB
93	7011-04-014.sldprt	88.5 KB
94	7011-04-015.sldprt	92 KB
95	7011-04-016.sldprt	86.5 KB
96	7011-04-017.sldprt	89 KB
97	7011-04-018.sldprt	108 KB
98	7011-04-019.sldprt	100 KB
99	7011-04-020.sldprt	89 KB
100	7011-04-1001.sldprt	91 KB
101	7011-04-1002.sldprt	93 KB
102	7011-04-1003.sldprt	96.5 KB
103	7011-04-1004.sldprt	89.5 KB
104	7011-04-1005.sldprt	88 KB
105	7011-04-1006.sldprt	126 KB
106	7011-04-1007.sldprt	99.5 KB
107	7011-04-1008.sldprt	107 KB
108	7011-04-1016.sldprt	127 KB
109	7011-04-1017.sldprt	98 KB
110	7011-04-800 REVA_7011-04 WORKING RETRACTED FASTENERS SUPPRESSED.sldasm	2.52 MB
111	7011-04-901.sldprt	91 KB
112	7011-04-902 REVA.sldprt	94.5 KB
113	7011-05-001_Default_As Machined_.sldprt	150 KB
114	7011-05-002.sldprt	107 KB
115	7011-05-003.sldprt	91 KB
116	7011-05-006.sldprt	89 KB
117	7011-05-007_Default_As Machined_.sldprt	148 KB
118	7011-05-014.sldprt	113 KB
119	7011-05-025_NOMINAL FOR MACHINED AT ASY.sldprt	87.5 KB
120	7011-05-026.sldprt	93 KB
121	7011-05-800_Default FASTENERS SUPPRESSED.sldasm	2.47 MB
122	7011-06-003.sldprt	189 KB
123	7011-06-004.sldprt	204 KB
124	7011-06-008 REVA_Default_As Machined_.sldprt	106 KB
125	7011-06-018.sldprt	111 KB
126	7011-06-023.sldprt	89.5 KB
127	7011-06-800 REVA_7011-06 WORKING RETRACTED.sldasm	4.18 MB
128	7011-07 3.7-4.7 GRIPPER JAW ASSY_7011 XXXX CONVERTER ASY.sldasm	361 KB
129	7011-07 ROBOT EOA ASY_3.7-4.7 TOOLING SHOWN.sldasm	596 KB
130	7011-07-001.sldprt	102 KB
131	7011-07-002.sldprt	90 KB
132	7011-07-003.sldprt	89.5 KB
133	7011-07-1001.sldprt	97.5 KB
134	7011-07-1002.sldprt	118 KB
135	7011-07-800_7011-07 PICKUP LONGEST PART AT STUFF FASTENERS SUPPRESSED.sldasm	589 KB
136	7011-08-001_Default_As Machined_.sldprt	99.5 KB
137	7011-08-002.sldprt	94 KB
138	7011-08-003.sldprt	92 KB
139	7011-08-004.sldprt	93 KB
140	7011-08-005.sldprt	90 KB
141	7011-08-006.sldprt	89.5 KB
142	7011-08-800_Default FASTENERS SUPPRESSED.sldasm	761 KB
143	7011-09-001_Default_As Machined_.sldprt	92.5 KB
144	7011-09-800.sldasm	397 KB
145	7011-10-001.sldprt	180 KB
146	7011-10-002.sldprt	90.5 KB
147	7011-10-003.sldprt	89.5 KB
148	7011-10-004.sldprt	89.5 KB
149	7011-10-005.sldprt	92.5 KB
150	7011-10-006.sldprt	88 KB
151	7011-10-1002.sldprt	89.5 KB
152	7011-10-1021.sldprt	107 KB
153	7011-10-1022.sldprt	128 KB
154	7011-10-800_7011 SHELL 252336 FASTENERS SUPPRESSED.sldasm	1.03 MB
155	7011-10-901.sldprt	89.5 KB
156	7011-102-804.sldasm	1.34 MB
157	7011-11 FUNNEL ASY 5.7.sldasm	493 KB
158	7011-11-001.sldprt	129 KB
159	7011-11-002.sldprt	89.5 KB
160	7011-11-003.sldprt	89 KB
161	7011-11-004.sldprt	87.5 KB
162	7011-11-005.sldprt	89 KB
163	7011-11-006.sldprt	90.5 KB
164	7011-11-007.sldprt	91.5 KB
165	7011-11-008.sldprt	92.5 KB
166	7011-11-1001.sldprt	114 KB
167	7011-11-1002.sldprt	90 KB
168	7011-11-1003.sldprt	92.5 KB
169	7011-11-1004.sldprt	93.5 KB
170	7011-11-800_DESIGN WORK.sldasm	1.34 MB
171	7011-12 3.7-4.7 GRIPPER JAW ASSY_7011 XXXX CONVERTER ASY.sldasm	332 KB
172	7011-12 GRIPPER AND JAW ASY.sldasm	451 KB
173	7011-12-001_Default_As Machined_.sldprt	116 KB
174	7011-12-002.sldprt	149 KB
175	7011-12-003_Default_As Machined_.sldprt	125 KB
176	7011-12-004_Default_As Machined_.sldprt	113 KB
177	7011-12-005.sldprt	155 KB
178	7011-12-006.sldprt	92.5 KB
179	7011-12-007.sldprt	155 KB
180	7011-12-008.sldprt	94 KB
181	7011-12-009.sldprt	93.5 KB
182	7011-12-010.sldprt	91 KB
183	7011-12-011.sldprt	87.5 KB
184	7011-12-1001.sldprt	97.5 KB
185	7011-12-1002.sldprt	109 KB
186	7011-12-800_BRICK AXIS HORIZONTAL LOWERED FASTENERS SUPPRESSED.sldasm	1.63 MB
187	7011-13-800_BRICK AXIS VERTICAL LOWERED FASTENERS SUPPRESSED.sldasm	1.65 MB
188	7011-14 LEFT UPPER REAR 3.7-4.7 TOOLING_full wrap round.sldasm	2.91 MB
189	7011-14 RIGHT UPPER REAR 3.7-4.7 TOOLING_pre-wrap oval.sldasm	588 KB
190	7011-14-1004.sldprt	103 KB
191	7011-14-1006.sldprt	116 KB
192	7011-14-1007.sldprt	101 KB
193	7011-14-1009.sldprt	103 KB
194	7011-14-1011.sldprt	136 KB
195	7011-14-800_PRE WRAP 3.7-4.7 FASTENERS SUPPRESSED.sldasm	5.16 MB
196	7011-15-001_Default_As Machined_.sldprt	248 KB
197	7011-15-002_Default_As Machined_.sldprt	109 KB
198	7011-15-003.sldprt	89.5 KB
199	7011-15-004.sldprt	98.5 KB
200	7011-15-005_Default_As Machined_.sldprt	125 KB
201	7011-15-007.sldprt	90.5 KB
202	7011-15-009.sldprt	84.5 KB
203	7011-15-010.sldprt	89.5 KB
204	7011-15-011_Default_As Machined_.sldprt	124 KB
205	7011-15-012.sldprt	92 KB
206	7011-15-013.sldprt	89.5 KB
207	7011-15-014.sldprt	102 KB
208	7011-15-015.sldprt	89 KB
209	7011-15-016.sldprt	88 KB
210	7011-15-017.sldprt	89.5 KB
211	7011-15-018.sldprt	92.5 KB
212	7011-15-019.sldprt	121 KB
213	7011-15-020.sldprt	122 KB
214	7011-15-021.sldprt	90.5 KB
215	7011-15-022.sldprt	90.5 KB
216	7011-15-023.sldprt	92.5 KB
217	7011-15-024_Default_As Machined_.sldprt	104 KB
218	7011-15-025.sldprt	88 KB
219	7011-15-026.sldprt	98.5 KB
220	7011-15-027.sldprt	105 KB
221	7011-15-028.sldprt	88.5 KB
222	7011-15-029_Default_As Machined_.sldprt	127 KB
223	7011-15-030.sldprt	90.5 KB
224	7011-15-031.sldprt	92 KB
225	7011-15-032.sldprt	94.5 KB
226	7011-15-033.sldprt	88 KB
227	7011-15-034.sldprt	89 KB
228	7011-15-035_RevA.sldprt	88 KB
229	7011-15-036.sldprt	83.5 KB
230	7011-15-037.sldprt	87.5 KB
231	7011-15-038.sldprt	93 KB
232	7011-15-039.sldprt	91.5 KB
233	7011-15-1001.sldprt	101 KB
234	7011-15-1003.sldprt	101 KB
235	7011-15-800_Default FASTENERS SUPPRESSED.sldasm	2.86 MB
236	7011-15-901.sldprt	90.5 KB
237	7049-03-1002.sldprt	105 KB
238	7049-04-1011.sldprt	91 KB
239	7049-04-1016.sldprt	127 KB
240	7049-04-1017.sldprt	97.5 KB
241	7049-10-1001.sldprt	132 KB
242	7049-10-1006.sldprt	131 KB
243	7049-10-1007.sldprt	106 KB
244	7049-103-804.sldasm	1.34 MB
245	7049-11 FUNNEL ASY T1_VN 127.sldasm	467 KB
246	7049-11-1001.sldprt	115 KB
247	7049-15-1003.sldprt	102 KB
248	7051-105-804.sldasm	1.21 MB
249	7051-11 FUNNEL ASY GMX386.sldasm	375 KB
250	8mm ALLEN BRADLEY Prox. Switch.sldprt	96 KB
251	ACE SHOCK ABSORBER #MA225M.sldprt	88 KB
252	ACE SHOCK ABSORBER #MA600M.sldprt	89.5 KB
253	ACE SHOCK MOUNTING BLOCK #250-0044.sldprt	101 KB
254	ACE SIDE LOAD ADAPTER #250-0081.sldprt	160 KB
255	ACE SIDE LOAD ADAPTER #250-0560.sldprt	92.5 KB
256	ALLEN BRADELY 3 WIRE PROX #872C-D3NP8-P3.sldprt	88.5 KB
257	ALLEN BRADLEY LIGHT CURTAIN 440L-P4J0640YD.sldprt	207 KB
258	ALLEN BRADLEY LIGHT CURTAIN 440L-P4J0960YD LEFT SIDE MOUNT.sldprt	122 KB
259	ALLEN BRADLEY LIGHT CURTAIN 440L-P4J0960YD RIGHT SIDE MOUNT.sldprt	122 KB
260	ALLEN BRADLEY PHOTOSWITCH #42EF.sldprt	98.5 KB
261	ALLEN BRADLEY PHOTOSWITCH REFLECTOR #92-39.sldprt	90 KB
262	ALLEN BRADLEY SERVO MOTOR #MPL-B540K-MJ22AA.sldprt	1.41 MB
263	Acculab Scale VA-6 kg.sldprt	104 KB
264	Associated Spring C0240-026-1250.sldprt	171 KB
265	Associated Spring C0300-040-1250.sldprt	175 KB
266	Associated Spring C1225-085-1500.sldprt	93 KB
267	B18.3.1M - 10 x 1.5 x 50 Hex SHCS -- 32NHX.sldprt	96 KB
268	B18.3.1M - 6 x 1.0 x 16 Hex SHCS -- 16NHX.sldprt	95.5 KB
269	B18.3.3M - 10 x 40 SHSS --N.sldprt	101 KB
270	B18.3.3M - 8 x 20 SHSS --N.sldprt	101 KB
271	B18.3.3M - 8 x 30 SHSS --N.sldprt	100 KB
272	B18.3.5M - 5 x 0.8 x 12 Socket FCHS -- 12N.sldprt	95 KB
273	B18.3.5M - 8 x 1.25 x 20 Socket FCHS -- 20N.sldprt	96 KB
274	B18.3.6M - M6 x 1.0 x 20 Hex Socket Type I Cup Pt. SS --N.sldprt	90.5 KB
275	BALL TRANSFER ASSEMBLY.sldasm	202 KB
276	BALLUFF CAM #BNN-520-81-S-60.sldprt	90 KB
277	BANNER FIBER #ITETA.753S.sldprt	145 KB
278	BELLEVILLE SPRING WASHER.sldprt	87 KB
279	BHCS 10 x 1.5 x 35.sldprt	96.5 KB
280	BHCS 3 x 0.5 x 10.sldprt	95 KB
281	BHCS 3 x 0.5 x 12.sldprt	96 KB
282	BHCS 5 x 0.8 x 10.sldprt	94.5 KB
283	BHCS 6 x 1.0 x 10.sldprt	95.5 KB
284	BHCS 6 x 1.0 x 30.sldprt	158 KB
285	BHCS 6 x 1.0 x 8.sldprt	94.5 KB
286	BODY FOR PARKER CYLINDER #1-1_2CC2MA3U14AC5.00.sldprt	205 KB
287	BODY FOR PARKER ISO CYLINDER #P1DYS040MCE0350SHNNN.sldprt	345 KB
288	BOSCH FLOATING BEARING ASSEMBLY #15DEFAU1123722407140.sldasm	220 KB
289	BOSCH REXROTH 1095mm LONG BALL SCREW ASY REVA_7011-04 WORKING RETRACT.sldasm	444 KB
290	BOSCH REXROTH 1540mm LONG BALL SCREW ASY REVA_7011-06 WORKING RETRACT.sldasm	305 KB
291	BOSCH SINGLE NUT WITH FLANGE #FEMEC32X10RX3.969-5.sldprt	97 KB
292	BRICK ROUND LARGE.sldprt	86 KB
293	Balluff Cam Tray #BNL-5307-80-02-200.sldprt	94.5 KB
294	Bimba-M-312-DXP_31-DXP-MainBody.sldprt	105 KB
295	Bimba-M-312-DXP_31-DXP-Rod.sldprt	89 KB
296	Bimba-M-312-DXP_STrokE_2_TypE_M_OpTioNs_DXP_Rod ExTENsioN_0_.sldasm	215 KB
297	Bracket_OSMK_069M.sldprt	96 KB
298	CARR LANE ACORN NUT #CLM-8-AN.sldprt	104 KB
299	CARR LANE ADJUSTABLE METRIC LOCATING BUTTON #CLM-10-LB_M10LB.sldprt	328 KB
300	CARR LANE FIXTURE KEY #CL-1-FK.sldprt	87.5 KB
301	CARR LANE FLAT WASHER #CL-14-FW.sldprt	89 KB
302	CARR LANE FLAT WASHER #CL-7-FW.sldprt	89 KB
303	CARR LANE HAND KNOB #CLM-2-HK-2A.sldprt	265 KB
304	CARR LANE LEVELING FOOT #M16SLFBO.sldprt	256 KB
305	CARR LANE M8 HAND KNOB #M20HK2A.sldprt	323 KB
306	CARR LANE SCR REST BUTTON CLM-1010-SRB.sldprt	91 KB
307	CARRLANE T- BOLT CLM-16--TB-65.sldprt	87.5 KB
308	Carr-Lane Hand Knob CLM-5A-HK4T.sldprt	143 KB
309	Carr-Lane Hand Knob CLM-6-HK4T.sldprt	145 KB
310	Carr-Lane Hand Wheel 4 inch x ,50 bore.sldprt	191 KB
311	Carr-Lane Hand Wheel 4 inch.sldprt	190 KB
312	Carr-Lane Speed Ball Handle M16.sldprt	93.5 KB
313	Carrlane-2JRB-DEFAULT_2JRB.sldprt	152 KB
314	Carrlane-LB3-DEFAULT_LB3.sldprt	372 KB
315	DESTACO RPW-500-2-END. BLOCK.sldprt	126 KB
316	DESTACO RPW-500-2-END. BLOCK_METRIC-TARGET MTG HOLES1.sldprt	132 KB
317	DESTACO-RPW-500-2_RPW-500-2-SENSOR_RPW-500-2-LEFT.sldprt	196 KB
318	DESTACO-RPW-500M-2_FULLY OPEN.sldasm	356 KB
319	DESTACP RPW-500-2-BODY_METRIC.sldprt	146 KB
320	DOWEL 10mmx30.sldprt	143 KB
321	DOWEL 10mmx36.sldprt	87.5 KB
322	DOWEL 10mmx45.sldprt	143 KB
323	DOWEL 20mmx50_DOWEL 20mmx50.sldprt	88 KB
324	DOWEL 5mmx24.sldprt	87.5 KB
325	DOWEL 6mmx16.sldprt	87.5 KB
326	DOWEL 6mmx20.sldprt	146 KB
327	DOWEL 6mmx24.sldprt	87.5 KB
328	DOWEL 6mmx26.sldprt	144 KB
329	DOWEL 6mmx28.sldprt	87.5 KB
330	DOWEL 6mmx30.sldprt	87.5 KB
331	DOWEL 6mmx36.sldprt	143 KB
332	DOWEL 8mmx30.sldprt	87.5 KB
333	E&E RETANGULAR BUMPER #ERB-2025-C-UR.sldprt	90 KB
334	E&E ROD COUPLER #EAC-140M.sldprt	92 KB
335	E&E SELF ALIGNING COUPLER #AC.437-F.sldprt	92.5 KB
336	E&E SELF ALIGNING COUPLER #EAC.437-F.sldprt	92.5 KB
337	ENERTROLS JAM NUT # 3120-09005.sldprt	89 KB
338	ENERTROLS SHOCK WITH STOP COLLAR #3_8 X 1.sldprt	174 KB
339	Effector 12mm Prox1.sldasm	209 KB
340	FHCS 0.25-20x0.75.sldprt	92.5 KB
341	FHCS 4 x 0.7 x 12.sldprt	95 KB
342	FHCS 5 x 0.8 x 12.sldprt	97 KB
343	FHCS 6 x 1.0 x 12.sldprt	94 KB
344	FHCS 6 x 1.0 x 16.sldprt	93 KB
345	FHCS 6 x 1.0 x 25.sldprt	93.5 KB
346	FINISHED PART CONVEYOR RH drive.sldprt	107 KB
347	FUNNEL ASSEMBLY T1_VN 127_FASTENERS ON.sldasm	483 KB
348	FW 0.375.sldprt	86.5 KB
349	FW, 5 mm.sldprt	86.5 KB
350	FW, 6 mm.sldprt	87 KB
351	HOFFMAN A122406LP ENCLOSURE.sldprt	248 KB
352	HOFFMAN A202406LP ENCLOSURE.sldprt	256 KB
353	HOFFMAN A72X6112LPFTC ENCLOSURE.sldprt	1.05 MB
354	HOFFMAN CSD16168 ENCLOSURE.sldprt	135 KB
355	HOFFMAN CSD20208 ENCLOSURE.sldprt	302 KB
356	Hex jam nut, M10 x 1.5, with 16mm WAF --D-N.sldprt	95.5 KB
357	Hex jam nut, M14 x 2 --D-N.sldprt	95 KB
358	Hex jam nut, M16 x 2 --D-N.sldprt	95 KB
359	Hex jam nut, M4 x .7 --D-N.sldprt	89.5 KB
360	Imported.sldprt	270 KB
361	Imported1.sldprt	138 KB
362	Interface Load Cell WMC 10K.sldprt	99.5 KB
363	JAM NUT 0.2500-20.sldprt	158 KB
364	JAM NUT 0.3750-24.sldprt	95.5 KB
365	JAM NUT 0.4375-20.sldprt	159 KB
366	JIS B 1355 Class A 6x16.sldprt	87.5 KB
367	JIS B 1355 Class A 8x24.sldprt	88.5 KB
368	JIS B 1355 Class A 8x30.sldprt	87.5 KB
369	Keyence Laser Sensor #LV-H32.sldprt	92 KB
370	Keyence Prox. Switch No Nuts.sldprt	95 KB
371	L16_0528_HARD_STOP.sldprt	94 KB
372	M4_0_DP.sldprt	90 KB
373	MCGILL CAM FOLLOWER MCFDE-35.sldprt	105 KB
374	MCMASTER CARR 12mm X 25mm LONG PULL DOWEL #97355A531.sldprt	90 KB
375	MCMASTER CARR 1_4MNPT TO 1_4 TUBE FITTING #57790k152.sldprt	122 KB
376	MCMASTER CARR 6905 BEARING 25mm ID 42mm OD #5972K292_5972K292.sldprt	230 KB
377	MCMASTER CARR ADHESIVE BACKED SCALE SHORT.sldprt	86.5 KB
378	MCMASTER CARR ADHESIVE BACKED SCALE.sldprt	84.5 KB
379	MCMASTER CARR BRONZE BUSHING #6658K34.sldprt	140 KB
380	MCMASTER CARR BRONZE THRUST WASHER ##5906K524.sldprt	87 KB
381	MCMASTER CARR KNURLED HAND KNOB 6mm X 16mm LONG #92581A440.sldprt	90 KB
382	MCMASTER CARR LIP SEAL #9505K124.sldprt	86.5 KB
383	MCMASTER CARR PF DRILL BUSHING 8486A417.sldprt	87 KB
384	MCMASTER CARR PRESS FIT BALL TRANSFER #6421K66.sldprt	88 KB
385	MCMASTER CARR PULL DOWEL #97355A531.sldprt	89 KB
386	MCMASTER CARR Retaining Ring .588 ID.sldprt	91.5 KB
387	MCMASTER CARR Retaining Ring .821 ID.sldprt	92 KB
388	MCMASTER CARR Snap Ring #97633A270.sldprt	92 KB
389	MCMASTER CARR Snap Ring #97633a230.sldprt	91.5 KB
390	MCMASTER CARR WASHER #92140A112.sldprt	139 KB
391	MHL2-32D-Y7PL_FULLY OPENED.sldasm	252 KB
392	MHL2-32D-Y7PL_MHL23128 Body_32.sldprt	149 KB
393	MHL2-32D-Y7PL_MHL23128 Jaw_32.sldprt	113 KB
394	MHL2-32D-Y7PL_MHL23128 Y5_Y6_Y7_Z7_Z8__Y7P.sldprt	94.5 KB
395	MISUMI ANGULAR ROLLER BEARING #B7005.sldprt	89 KB
396	MISUMI BUSHING FOR LOCATING PIN-STRAIGHT TYPE #JBA12-16_JBA(p6,SKS3)-12-16-Straight Type-.sldprt	148 KB
397	MISUMI COMPRESSION SPRING #U-CZM0.60-L3.00_pre-compression.sldprt	87.5 KB
398	MISUMI DIAMOND PIN #JPDTB6_10.sldprt	95.5 KB
399	MISUMI DOUBLE FLANGE PILOT BUSHING #LHICW-N13_LHICW-N (SUJ2,58HRC(Outer Cylinder),SUJ2(Ball),Resin(R.sldprt	114 KB
400	MISUMI DRILL BUSHING #JBA10-16_JBA(p6,SKS3)-10-16-Straight Type-.sldprt	89 KB
401	MISUMI DRILL BUSHING #JBA13-25.sldprt	87 KB
402	MISUMI DRILL BUSHING #U-JBAFP1_00-P0_7650-L0_50.sldprt	88.5 KB
403	MISUMI HAND KNOB #NHM6-15_NHM(ABS Resin)-JIS SS400-Chromate-6-15-.sldprt	97.5 KB
404	MISUMI LOCATING PIN #JPQA5-P5.97.sldprt	87.5 KB
405	MISUMI LOCATING PIN #JPQA6-P7.97.sldprt	145 KB
406	MISUMI LOCATING PIN #JPQD5-P5.97.sldprt	150 KB
407	MISUMI LOCATING PIN #JPQD6-P7.97.sldprt	150 KB
408	MISUMI LOCKNUT BNBS25.sldprt	108 KB
409	MISUMI METRIC BUSHING FOR LOCATING PIN #JBA12-25_JBA(p6,SKS3)-20-30-Straight Type-.sldprt	88.5 KB
410	MISUMI NEEDLE RADIAL AND THRUST BALL BEARING #NKXZ25_NKXZ-25-.sldprt	115 KB
411	MISUMI PLASTIC HAND KNOB WITH STUD #NHM10-40_NHM(ABS Resin)-JIS SS400-Chromate-10-40-.sldprt	97 KB
412	MISUMI PRECISION LINEAR SHAFT #SFJW13-143-M6-N6 _SFJW (SUJ2)-6-13-143-No-6-Both Ends Female Thread T.sldprt	91 KB
413	MISUMI ROTARY SHAFT BOTH ENDS TAPPED #SFRW25-138_0-M6-N6_SFRW(1045 Steel,Black Oxide)-25-6-138-6-Non.sldprt	90.5 KB
414	MISUMI ROTARY SHAFT ONE END TAPPED #SFRT12-88_0-M6_SFRT(1045 Steel,Black Oxide)-12-No-6-88-None-Stan.sldprt	89 KB
415	MISUMI ROUND PIN #JPBTB6_10.sldprt	91.5 KB
416	MISUMI SHAFT #SFAM12-25-F40-B37-P8-T10-S7-Q8_SFAM(52100 Bearing Steel)-No-25-Yes-No-No-Yes-Both Side.sldprt	95 KB
417	MISUMI STANDARD WASHER #FWSSB30-V7-T2.sldprt	86.5 KB
418	MISUMI STOPPER BOLT WITH BUMPER #UST12-60_WRAP STATION RETRACT.sldprt	106 KB
419	MISUMI STOPPER BOLT WITH BUMPER #UST12-70_7011-11 WORKING RETRACT.sldprt	110 KB
420	MISUMI STOPPER SCREW #STEHN13_STEHN(4137 Steel,Electroless Nickel Plating)-Screw-13-Fixed-.sldprt	94 KB
421	MISUMI URETHANE FLAT WASHER #URWL25-12-5_URWL (Ester Polyurethane-Shore A50)-12-Regular Class-Fixed.sldprt	88 KB
422	MISUMI URETHANE PAD #U-UTSHN4H0_38-A3_50-B1_00-F3_00-G0_50-Z6.sldprt	92 KB
423	MISUMI URETHANE SHEET #U-UTSHN4H0_38-A2_00-B1_00-F1_00-G0_50-Z6.sldprt	92.5 KB
424	MISUMI Washer U-WSSB0.38-D1.00-T0.125.sldprt	87 KB
425	MISUMI Washer WSSB25-10-3.sldprt	139 KB
426	MOTOMAN #HP50_7011-07 PICKUP LONGEST PART AT STUFF.sldasm	1.78 MB
427	MOTOMAN HP 50 L-AXIS.sldprt	174 KB
428	MOTOMAN HP50 151332-2_BLOCK_STOP_L-AXIS_30 DEG.sldprt	93 KB
429	MOTOMAN HP50 B-AXIS.sldprt	265 KB
430	MOTOMAN HP50 BASE.sldprt	202 KB
431	MOTOMAN HP50 MOTOR.sldprt	310 KB
432	MOTOMAN HP50 MOTOR2.sldprt	310 KB
433	MOTOMAN HP50 R-AXIS.sldprt	157 KB
434	MOTOMAN HP50 S-AXIS.sldasm	1.12 MB
435	MOTOMAN HP50 S-AXIS.sldprt	436 KB
436	MOTOMAN HP50 T-AXIS.sldprt	93 KB
437	MOTOMAN HP50 U-AXIS.sldasm	406 KB
438	MOTOMAN HP50 U-AXIS.sldprt	232 KB
439	MOTOMAN HP50 sgmdh-12a2a-yr12.sldprt	225 KB
440	McMASTER CARR SHOULDER SCREW 16MM BODY #92981A509.sldprt	128 KB
441	McMaster Carr .38 Push Retainer.sldprt	121 KB
442	McMaster Carr Push Nut #94813A600.sldprt	121 KB
443	McMaster Carr Screw Jack_62255K111.sldprt	679 KB
444	McMaster-Carr Rod Eye 6071K320_6071K32.sldprt	195 KB
445	Misumi ROUND BUMPER U-AZXHC0_75-L1_00-T10.sldprt	94 KB
446	Misumi U-SFJ0.38-L4.25-FC0.25-A0.50.sldprt	143 KB
447	Misumi U-SFJ0.50-L5.44-FC0.25-A0.12.sldprt	87.5 KB
448	Misumi-MSB13-65_MSB(4137 Steel)-13-No-65-.sldprt	98 KB
449	Misumi-U-LMUW0_38.sldprt	155 KB
450	Misumi-U-LMUW0_50.sldprt	93.5 KB
451	Misumi-U-SFJ0_38-L3_75-FC0_25-A1_75.sldprt	87.5 KB
452	ORIENTAL GEAR MOTOR.sldprt	106 KB
453	ORIENTAL MOTOR BRACKET.sldprt	98.5 KB
454	ORIENTAL MOTOR COUPLING.sldprt	91.5 KB
455	PARKER #20240210_CASTING_AF0.sldprt	360 KB
456	PARKER BODY FOR CYLINDER #P1M040FDCP5M100.sldprt	254 KB
457	PARKER BODY FOR ISO CYLINDER #P1DKS040MCE0200FFNNN.sldprt	281 KB
458	PARKER BODY FOR ISO CYLINDER #P1DYS040MCE0580F1NNNI.sldprt	267 KB
459	PARKER CYLINDER #1-1_2CC2MA3U14AC5.00_6043,6099,7011 WRAP WORKING RETRACT.sldasm	289 KB
460	PARKER CYLINDER #1-1_2CC2MA3U14AC5.00_FULLY EXTENDED.sldasm	275 KB
461	PARKER CYLINDER #1-1_2CC2MA3U14AC5.00_WRAP UPPER TOOL EXTEND.sldasm	276 KB
462	PARKER CYLINDER #P1DMS040MCE0250SHNNN_7011-12 WORKING EXTENDED.sldasm	352 KB
463	PARKER CYLINDER #P1DMS040MCE0250SHNNN_7011-12 WORKING RETRACTED.sldasm	381 KB
464	PARKER CYLINDER #P1M040FDCP5M100_7011-11 WORKING EXTENDED.sldasm	358 KB
465	PARKER CYLINDER BODY FOR #P1DMS040MCE0250SHNNN.sldprt	345 KB
466	PARKER CYLINDER ROD ASY FOR #P1DMS040MCE0250SHNNN.sldprt	120 KB
467	PARKER DAEDLE #003-1412-06.sldprt	87.5 KB
468	PARKER DAEDLE #11130710_CASTING_AF0.sldprt	126 KB
469	PARKER DAEDLE #11131510.sldprt	102 KB
470	PARKER DAEDLE #11134710.sldprt	90 KB
471	PARKER DAEDLE #11139010.sldprt	101 KB
472	PARKER DAEDLE #20240210_COVER.sldprt	89.5 KB
473	PARKER DAEDLE #20244010_SWITCH.sldprt	92.5 KB
474	PARKER DAEDLE #DIN508_5.sldprt	88.5 KB
475	PARKER DAEDLE #FLG-008.sldprt	103 KB
476	PARKER DAEDLE #HPLA080 BODY 980mm STROKE.sldprt	139 KB
477	PARKER DAEDLE #HPLA080-BMPR-PLT.sldprt	116 KB
478	PARKER DAEDLE #HPLA080-C1-E1-R1_ASM.sldasm	176 KB
479	PARKER DAEDLE #HPLA080-CARRIAGE-ENDCAPS.sldprt	92.5 KB
480	PARKER DAEDLE #HPLA080-DRV-CVR-UNSUPPORTED_ASM.sldasm	210 KB
481	PARKER DAEDLE #HPLA080-DRV-HSG-CAST_AF0.sldprt	421 KB
482	PARKER DAEDLE #HPLA080-DRV-HSG_ASM.sldasm	475 KB
483	PARKER DAEDLE #HPLA080-NL-CARR-NO-ENC.sldprt	114 KB
484	PARKER DAEDLE #HPLA080-PROXIMITY-SWITCH_ASM.sldasm	189 KB
485	PARKER DAEDLE #HPLA080-S02-F07_ASM.sldasm	187 KB
486	PARKER DAEDLE #HPLA080-TENSION-STATION_ASM.sldasm	382 KB
487	PARKER DAEDLE #HPLA080-TENSION-STATION_ASM.sldprt	92.5 KB
488	PARKER DAEDLE #HPLA080-TRIPPER_ASM.sldasm	152 KB
489	PARKER DAEDLE #M316.sldprt	90 KB
490	PARKER DAEDLE #M406S.sldprt	90 KB
491	PARKER DAEDLE #M412.sldprt	90 KB
492	PARKER DAEDLE #M4FW.sldprt	139 KB
493	PARKER DAEDLE #M5-BH-10.sldprt	90 KB
494	PARKER DAEDLE #M5-BH-12.sldprt	90 KB
495	PARKER DAEDLE #M5LWS.sldprt	88 KB
496	PARKER DAEDLE #PEN115-1-STAGE-S7.sldprt	113 KB
497	PARKER DAEDLE #SCHNORR_S4.sldprt	139 KB
498	PARKER DAEDLE HPLA080 980mm STROKE LEFT HAND MOTOR MOUNT_3 7011-01 MAT AT WRAP.sldasm	580 KB
499	PARKER DAEDLE HPLA080 980mm STROKE RIGHT HAND MOTOR_1 7011-01 AT SCALE PICKUP.sldasm	587 KB
500	PARKER DAEDLE T-NUT #131-700102.sldprt	88.5 KB
501	PARKER DAEDLE TOE CLAMP #500-000930.sldprt	92 KB
502	PARKER END FOOT MOUNT FOR #P1M040FDCP9N50.sldprt	114 KB
503	PARKER HEAD END FOOT MOUNT FOR #P1M040FDCP9N50.sldprt	114 KB
504	PARKER ISO CYLINDER #P1DKS040MCE0200FFNNN.sldasm	393 KB
505	PARKER ISO CYLINDER #P1DKS040MCE0200FFNNN_extended.sldasm	360 KB
506	PARKER ISO CYLINDER #P1DYS040MCE0350SHNNN_7011-01,05 WORKING RETRACTED.sldasm	379 KB
507	PARKER P1D ISO SERIES CYLINDER #P1DYS040MCE0580F1NNNI.sldasm	332 KB
508	PARKER P1DYS040MCE0600NFNNN_WORKING RETRACTED.sldasm	361 KB
509	PARKER ROD ASY FOR CYLINDER #P1M040FDCP5M100.sldprt	100 KB
510	PARKER ROD ASY FOR ISO CYLINDER #P1DKS040MCE0200FFNNN.sldprt	141 KB
511	PARKER ROD ASY FOR ISO CYLINDER #P1DYS040MCE0580F1NNNI.sldprt	139 KB
512	PHD BUMPER PAD FOR SLC83.sldprt	86.5 KB
513	PHD CAP FOR SLIDE #SKD86x50_DB_M_BR_J3_62516_1O_E.sldprt	130 KB
514	PHD CARRIAGE FOR 250mm STROKE SLC83.sldprt	139 KB
515	PHD CLAMP COLLAR FOR SLC83.sldprt	103 KB
516	PHD CYLINDER BODY FOR 250mm STROKE SLC83.sldprt	134 KB
517	PHD CYLINDER CAP FOR SLC83.sldprt	126 KB
518	PHD CYLINDER ROD FOR 250mm SLC83.sldprt	89.5 KB
519	PHD HEAD FOR SLC83.sldprt	127 KB
520	PHD MAGNETORESISTIVE SENSOR FOR SLC83.sldprt	92.5 KB
521	PHD NUT FOR SLC83.sldprt	103 KB
522	PHD SKSL_BRACKET_75_B.sldprt	104 KB
523	PHD SKSL_C_STROKE_75_B.sldprt	102 KB
524	PHD SKSL_C_STROKE_76_B.sldprt	104 KB
525	PHD SKSL_H_75_L_.sldprt	182 KB
526	PHD SKSL_H_76_L_.sldprt	171 KB
527	PHD SK_SL_SH_AB_75.sldprt	91.5 KB
528	PHD SK_SL_SH_PAD_76_B.sldprt	86.5 KB
529	PHD SK_SL_SMK_75.sldprt	125 KB
530	PHD SK_SL_TP_75LB3050.sldprt	139 KB
531	PHD SK_SL_TP_76LB500.sldprt	140 KB
532	PHD SLIDE #SLB86x50_DB_M_AE_AR_62516_1O_E_7011-12 WORKING RETRACT.sldasm	490 KB
533	PHD SLIDE #SLC83x250_L9_M_J3_AE_AR_62516_1O_E_7011-03.sldasm	512 KB
534	PHD SLIDE #SLC83x250_L9_M_J3_AE_AR_62516_1O_E_FULLY EXTENDED.sldasm	505 KB
535	PHD SLIDE #SLC85x305_L9_M_GO_57034_02_57056_03_3_62516_1O_E_FULLY RETRACTED.sldasm	583 KB
536	PHD SLIDE #SLC86x50_DB_M_AE_AR_62516_1O_E_7011-02 WORKING EXTENDED.sldasm	493 KB
537	PHD SLIDE BODY FOR SLC83.sldprt	166 KB
538	PHD body_CVAS5V40x305Closed_Retract_.sldprt	134 KB
539	PHD body_CVAS5V50x50Closed_Retract_.sldprt	133 KB
540	PHD cap_CV40_1_0_0_0_0_2_0.sldprt	128 KB
541	PHD cap_CV50_1_15_0_0_0_2_0.sldprt	131 KB
542	PHD head_CV40_1_0_0_0_.sldprt	131 KB
543	PHD head_CV50_1_15_0_0_.sldprt	133 KB
544	PHD met_SW_MAG_RES_CV_5_1.sldprt	92.5 KB
545	PHD met_SW_MAG_RES_CV_6_1.sldprt	92.5 KB
546	PHD rod_CV40.sldprt	89.5 KB
547	PHD rod_CV50.sldprt	90 KB
548	PIVOT SUB ASSEMBLY.sldasm	409 KB
549	PRECISION TECHNOLOGIES PUR PER PRINT RT BELT DRIVE HOUSING #PT100971.sldprt	182 KB
550	Pin Stamp Assembly_retracted.sldasm	302 KB
551	ROBOHAND ROTARY ACTUATOR #RR_56M_180_A_HALL_OHSP_006_OSMK_069_CABL_013_C.sldasm	383 KB
552	ROBOHAND RR56M_A_180_BODY_.sldprt	218 KB
553	ROD ASY FOR PARKER CYLINDER #1-1_2CC2MA3U14AC5.00.sldprt	92 KB
554	ROD ASY FOR PARKER ISO CYLINDER #P1DYS040MCE0350SHNNN.sldprt	167 KB
555	RR56M_TURNTABLE.sldprt	109 KB
556	Rexroth-1591-1-2020-S-DEFAULT_1507-3-4005.sldprt	97 KB
557	Rexroth-1591-1-2020-S-DEFAULT_1590-1-2000.sldprt	98.5 KB
558	Rexroth-1591-1-2020-S-DEFAULT_1591-1-2020.sldprt	96 KB
559	Rexroth-1591-1-2020-S-DEFAULT_8446-005-04.sldprt	105 KB
560	Rexroth-1591-6-2020-S-DEFAULT_1591-6-2020.sldprt	90 KB
561	Rexroth-1591-6-2020-S-DEFAULT_6204.sldprt	99.5 KB
562	Rexroth-1591-6-2020-S-DEFAULT_DIN 471 - 10 x 1 20 x 1.sldprt	92 KB
563	SCHALTZ 07JE2007 LESS CABINET.sldprt	1.35 MB
564	SHCS 0.375-16x0.75.sldprt	96 KB
565	SHCS 10 x 1.5 x 140.sldprt	95 KB
566	SHCS 10 x 1.5 x 20-V1.sldprt	95 KB
567	SHCS 10 x 1.5 x 20.sldprt	96 KB
568	SHCS 10 x 1.5 x 25.sldprt	157 KB
569	SHCS 10 x 1.5 x 30.sldprt	157 KB
570	SHCS 10 x 1.5 x 35.sldprt	96.5 KB
571	SHCS 10 x 1.5 x 40.sldprt	156 KB
572	SHCS 10 x 1.5 x 45.sldprt	158 KB
573	SHCS 10 x 1.5 x 50.sldprt	95 KB
574	SHCS 10 x 1.5 x 55.sldprt	95 KB
575	SHCS 10 x 1.5 x 60.sldprt	95 KB
576	SHCS 10 x 1.5 x 70.sldprt	95 KB
577	SHCS 12 x 1.75 x 30_SHCS 12 x 1.75 x 30.sldprt	95 KB
578	SHCS 12 x 1.75 x 60.sldprt	95 KB
579	SHCS 12 x 1.75 x 70.sldprt	95 KB
580	SHCS 16 x 2.0 x 120.sldprt	95 KB
581	SHCS 3 x 0.5 x 10.sldprt	157 KB
582	SHCS 4 x 0.7 x 12.sldprt	94.5 KB
583	SHCS 4 x 0.7 x 20.sldprt	95.5 KB
584	SHCS 5 x 0.8 x 16.sldprt	94.5 KB
585	SHCS 5 x 0.8 x 20.sldprt	94.5 KB
586	SHCS 5 x 0.8 x 30.sldprt	94.5 KB
587	SHCS 5 x 0.8 x 70.sldprt	94.5 KB
588	SHCS 5 x 0.8 x 80.sldprt	94.5 KB
589	SHCS 6 x 1.0 x 100.sldprt	94.5 KB
590	SHCS 6 x 1.0 x 12.sldprt	95.5 KB
591	SHCS 6 x 1.0 x 16.sldprt	98 KB
592	SHCS 6 x 1.0 x 20-V1.sldprt	94.5 KB
593	SHCS 6 x 1.0 x 20.sldprt	157 KB
594	SHCS 6 x 1.0 x 25.sldprt	96 KB
595	SHCS 6 x 1.0 x 30.sldprt	96 KB
596	SHCS 6 x 1.0 x 35.sldprt	94.5 KB
597	SHCS 6 x 1.0 x 45.sldprt	95.5 KB
598	SHCS 6 x 1.0 x 90.sldprt	95 KB
599	SHCS 8 x 1.25 x 100.sldprt	94.5 KB
600	SHCS 8 x 1.25 x 140.sldprt	94.5 KB
601	SHCS 8 x 1.25 x 20.sldprt	94.5 KB
602	SHCS 8 x 1.25 x 25.sldprt	97 KB
603	SHCS 8 x 1.25 x 30.sldprt	95.5 KB
604	SHCS 8 x 1.25 x 35.sldprt	95.5 KB
605	SHCS 8 x 1.25 x 45.sldprt	157 KB
606	SHCS 8 x 1.25 x 50.sldprt	94.5 KB
607	SHCS 8 x 1.25 x 60.sldprt	94.5 KB
608	SHCS 8 x 1.25 x 70.sldprt	157 KB
609	SHCS 8 x 1.25 x 80.sldprt	94.5 KB
610	SKD86x50_DB_M_BR_J3_62516_1O_E_FULLY EXTENDED.sldasm	453 KB
611	SKSL_H_76_K_.sldprt	165 KB
612	SK_SL_SH_PAD_76_D.sldprt	139 KB
613	SK_SL_TP_76KD500.sldprt	147 KB
614	SMC GRIPPER #MHL2-40D-Y7PL_FULLY EXTENDED.sldasm	251 KB
615	SMC GRIPPER ARM ASY #MHL2-40D-Y7PL.sldprt	194 KB
616	SMC GRIPPER BODY #MHL2-40D-Y7PL.sldprt	148 KB
617	SMC GRIPPER SENSOR #MHL2-40D-Y7PL.sldprt	94.5 KB
618	Sensor_OHSP_006PNP0_30T.sldprt	93.5 KB
619	Set Screw Cup Point 0.25-20x0.25.sldprt	89 KB
620	Set Screw Cup Point 0.25-20x1.sldprt	145 KB
621	Socket Head Cap Screw_AM_PreviewCfg.sldprt	94.5 KB
622	Symmco .38 ID x .50 OD X 1 Lg..sldprt	139 KB
623	Symmco Bearing #SS-1216-16.sldprt	139 KB
624	THK 25HSR BLOCK.sldprt	106 KB
625	THK 25HSR LA BLOCK.sldprt	174 KB
626	THK BEARING BLOCK HSR25R.sldprt	95 KB
627	THK BEARING BLOCK HSR35R.sldprt	95.5 KB
628	THK HSR25 RAIL 1600mm LG.sldprt	128 KB
629	THK HSR25 RAIL 580mm Lg.sldprt	102 KB
630	THK HSR25 RAIL 700mm long.sldprt	105 KB
631	THK HSR25 RAIL.sldprt	155 KB
632	THK HSR35 X 1000 RAIL.sldprt	105 KB
633	THK HSR35 X 1400 RAIL.sldprt	113 KB
634	Telesis 1700 Pin Stamper.sldprt	104 KB
635	Thin Nut, .75-16.sldprt	147 KB
636	VALU-GUIDE CROSS BLOCK #VG-621-12-12.sldprt	88 KB
637	VALU-GUIDE RAIL #VG-SSWF-12.sldprt	149 KB
638	VALU-GUIDE RAIL CLIP #VG-018-01.sldprt	92 KB
639	VALU-GUIDE RAIL TOP #VG-SSWF-12.sldprt	90.5 KB
640	VALU-GUIDE ADJUSTING ROD #VG-232-R-516.sldprt	89 KB
641	VALU-GUIDE RAIL BRACKET #VG-221-58.sldprt	98 KB
642	body_CVAS5V50x50Closed_Retract_.sldprt	132 KB
643	extra weight for robot inertia model.sldprt	84.5 KB
644	head_CV50_1_15_0_0_.sldprt	131 KB
645	met_SW_MAG_RES_CV_6_1.sldprt	92.5 KB
646	rod_CV50.sldprt	89.5 KB
647	╖╟▒Ω╫╘╢»╗»╔Φ▒╕.STEP	145 MB
648	╖╟▒Ω╫╘╢»╗»╔Φ▒╕.sldasm	25.5 MB
649	╜╪═╝ (1).JPG	302 KB
650	╜╪═╝ (2).jpg	306 KB
651	╜╪═╝ (3).jpg	302 KB